Tag Archives: Select

Maintenance Oil Light Reset Infiniti Q50

How do you reset maintenance light, reset service light indicator Infiniti Q50, year 2014. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Infiniti Q50, oil reset instructions:

  1. Press the Start/Stop button but do not start the engine.
  2. From the lower display, scroll to the right to access the secondary menu. Select the Maintenance Note icon.
  3. From the Maintenance Note menu select the Maintenance icon.
  4. Select All Parts and then Select the Maintenance item being serviced. Select Reset or set the service distance for the Maintenance item.
  5. Exit the menu and press the Start/Stop button to turn the vehicle off.
  6. Start the engine to verify the indicator has been reset.

Reset service light oil life indicator dashboard Mazda 3

How do you reset maintenance light, reset service light indicator Mazda 3, year 2013, 2014, 2015. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Mazda 3, year 2013, 2014, 2015 oil reset instructions:
There are 2 different reset methods depending on if the vehicle has a touch screen:

  1. Press and hold the TRIP button with the ignition switched off.
  2. Continue to hold the TRIP button and switch the ignition on.
  3. After 5 seconds the master warning light will flash for a few seconds to indicate the reset is complete.
  4. Turn the ignition off and then start the engine to verify the indicator has been reset.

With Touch Screen Instructions:

  1. Turn the ignition to run (one position before starting the engine).
  2. Select the Applications (A) icon.
  3. Select Maintenance to display the maintenance list screen and select Oil Change.
  4. Select Reset and follow the prompts.
  5. Turn the ignition off and then start the engine to verify the indicator has been reset

MAZDA3-Maintenance-Warning-Light

Reset driving time indicator Skoda Citigo

Reset driving time indicator Skoda Citigo. From year: 2011, 2012, 2013.
Reset-service-Skoda-Citigo
1. The rocker switch A and the button B are located on the windscreen wiper lever.
2. Select memory.
3. Depress button B.
4. Selecting functions.
5. Briefly push the rocker switch A down or up, this opens the individual functions of the multifunction display one after the other.
6. Resetting, select the driving time indicator.
7. Push the button B for a few seconds.
8. The following readouts of the selected memory will be set to 0 by button B.

Reset service light indicator Renault Modus

Reset service light indicator Renault Modus. From year: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012.

How to reset service light indicator Renault Modus.

1. To reset the mileage before service on a Renault Modus, follow this steps.
2. Select the miles/km to service display on the trip computer.
3.Repeatedly push and hold one of the two buttons on the end of the windscreen wiper stalk for about 10 seconds until the mileage is reset and the display shows the mileage before maintenance service permanently.

Service Light Reset SCION xD

2007-2011

1. Turn the ignition to run (one position before starting engine).
2. Select trip metre A reading by using the trip metre button and then turn the ignition off.
3. While pressing the trip meter reset button
4. Continue to press and hold the button until the trip meter displays “”000000″”.”
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

2012

1. Turn the ignition to run (one position before starting engine).
2. Press the MODE switch knob on the upper right side of the combination meter until “”TRIP A”” is shown and then turn the ignition off.”
3. While pressing the trip meter reset button
4. After the reset procedure is complete
5. Turn the ignition off and then start the engine to verify the indicator has been reset.