Category Archives: Service light reset Chevrolet

Oil reset, oil light indicator, maintenance light reset, service light reset, without using a computer for Chevrolet

Servive light reset oil life indicator dashboard Chevrolet Camaro

How do you reset maintenance light, reset service light indicator Chevrolet Camaro, year 2014, 2015. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Chevrolet Camaro, year 2014, 2015 oil reset instructions:

  1. Turn the ignition to run.
    *one position before starting engine
  2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
  3. If the “Change Engine Oil Soon” message is not on, the system is reset. If it is on, turn the ignition off and repeat steps 1-2.
  4. Turn the ignition off and then start the engine to verify the indicator has been reset.

Reset service light oil life indicator dashboard Chevrolet Cruze

How do you reset maintenance light, reset service light indicator Chevrolet Cruze, year 2013, 2014, 2015. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Chevrolet Cruze, year 2013, 2014, 2015 oil reset instructions:

  1. Turn the ignition to run (one position before starting engine).
  2. Press the DIC menu button on the turn signal lever to enter the vehicle information menu. Use the thumbwheel to scroll through the menu items until you reach REMAINING OIL LIFE.
  3. Press the SET/CLR button to reset the oil life to 100%. When prompted select YES or NO. Press the SET/CLR button to confirm.
  4. Turn the ignition off and then start the engine to verify the indicator has been reset.

Reset service light oil life indicator dashboard Chevrolet Silverado

How do you reset maintenance light, reset service light indicator Chevrolet Silverado, year 2013, 2014, 2015. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Chevrolet Silverado, year 2013, 2014, 2015 oil reset instructions:

  1. Turn the ignition to run (one position before starting engine).
  2. *Display the OIL LIFE REMAINING on the DIC (i button). If the vehicle does not have DIC buttons, the vehicle must be in P (Park) to access this display by pressing the trip odometer reset stem.
  3. Press and hold the SET/RESET (arrow) button on the DIC, or the trip odometer reset stem if the vehicle does not have DIC buttons for more than 5 seconds. The oil life will change to 100%.
  4. Turn the ignition off and then start the engine to verify the indicator has been reset.
    *Remaining oil life can also be reset by depressing the gas pedal 3 times within 5 seconds instead of using the DIC.

Reset service light oil life indicator dashboard Chevrolet Corvette

How do you reset maintenance light, reset service light indicator Chevrolet Corvette, year 2014, 2015. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Chevrolet Corvette, year 2014, 2015 oil reset instructions:

  1. Turn the ignition to run
    *one position before starting engine.
  2. Use the DIC arrow buttons on the right side of the steering wheel to display OIL LIFE REMAINING.
  3. Press and hold the SEL button until REMAINING OIL LIFE 100% appears.
  4. Turn the ignition off and then start the engine to verify the indicator has been reset.

Oil reset service light indicator Chevrolet Cruze

How do you reset maintenance light, reset service light indicator Chevrolet Cruze, year 2012. For reset maintenance light and that can be made manually by use button on car dash board.

  1. Turn the ignition to run (one position before starting engine).
  2. Press the DIC menu button on the turn signal lever to enter the vehicle information menu. Use the thumbwheel to scroll through the menu items until you reach REMAINING OIL LIFE.
  3. Press the SET/CLR button to reset the oil life to 100%. When prompted, use the thumbwheel to select YES or NO. Press the SET/CLR button to confirm.
  4. Turn the ignition off and then start the engine to verify the indicator has been reset.