How do you reset service light indicator Land Rover Freelander 2. Reset service light indicator Land Rover Freelander 2. How to reset maintenance light, reset oil service light. Can be made manually by use button on car dash board.
Hold the milage reset button in.
Turn the ignition on to position 2.
Keep the button held in and various different words will flash up on the little screen.
Dont release until it goes back to reading the milage.
Once this comes up release the button and it should be ok when you next cycle the ignition.
Manual Reset Procedure:
Press and hold the trip reset button.
Turn the ignition switch on to the ignition position II (one position before starting engine).
If the SII (Service Indicator Interval) function is enabled the informationdisplay will flash ‘SERVICE’ for 5 seconds and then display ‘SERVICE’ constantly. If the SII function is not enabled the informationdisplay will show the normal odometer and trip information.
If the trip reset button is released within 10 seconds of entering the reset mode, the informationdisplay will show ‘DIST’. If the trip reset button is not released after 10 seconds the instrument cluster will exit the manual reset procedure.
If the oil service value is to be reset, press the trip reset button within 10 seconds for 5 seconds and then reset the oil service value, the display will then show ‘END’.
If the trip reset button is pressed for 5 seconds the display will exit the reset routine. If the trip reset button is not pressed for more than 10 seconds, then the informationdisplay will exit the reset routine. Turn the ignition off and then start the engine to verify the indicator has been reset.