Tag Archives: oil

oil reset service light indicator Citroen C4

How do you reset service light indicator Citroen C4.

Reset service light indicator Citroen C4. From years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012.

  1. Switch off the ignition.
  2. Now turn the ignition to “S” for steering lock.
  3. Next press and hold the trip meter button.
  4. While holding the trip meter button start the ignition and continue to hold the trip meter button until the screen goes to “)” and the light goes off.
  5. Switch off the ignition, now the reseting of the light is complete.

Oil service light indicator reset an Audi S8 Service Interval

Reset service light indicator, engine oil life Audi S8, oil reset instructions:

Instructions:

  1. Locate the trip-meter knob in the lower center of the gauge cluster. The knob is black and you use it to reset your mileage on your tip-meter.
  2. Push inward on the knob until the service interval light starts to flash. This generally takes about 10 seconds.
  3. Let the knob out, and then tap it in one time quickly to turn off the light.

You can expect the Audi S8 service interval light to come on every 3,000 miles when it is time to change the oil in your vehicle. You can also expect it to come on every 15,000 miles for a regular maintenance check. If you usually take your Audi to the dealership to have it serviced, they will turn the light off for you. However, if you want to save money and do the work yourself, you need to know how to turn off the service interval light yourself.

Oil reset service light indicator Chevrolet Cavalier

Reset service light indicator, engine oil life Chevrolet Cavalier, oil reset instructions:

Reset service light indicator Chevrolet Cavalier. For reset maintenance light and that can be made manually by use button on car dash board

 

How do you reset service light indicator Chevrolet Cavalier.

  1. Make sure the light is has a wrench icon. This article is not intended to help reset a “service engine” light.
  2. Without turning on your car, turn the key to the right and you will see all of your dash lights come on.
  3. Press on the brake 4 times.
  4. On the 4th time, hold the brake petal down for 30 seconds and release.
  5. This should reset the light.

 

Reset tire pressure warning light Toyota Solara 2 generation

Reset tire pressure warning light Toyota Solara 2 generation. From year: 2004, 2005, 2006, 2007, 2008.

How to reset tire pressure warning light Toyota Solara second generation.

Reset-tire-pressure-warning-light-Toyota-Solara-2-generation

This light warns that the tire pressure of one or more of your tires (including ground spare tire) is low. The light comes on when the ignition key is turned to the “ON” position. It goes off after a few seconds. This indicates that the tire pressure warning system is functioning properly. If the warning light comes on, stop your vehicle in a safe place as soon as possible and check that the inflation pressure of all tires (including ground spare tire) is as specified on the tire and loading information label.

The light should go off a few minutes after the tire pressure is adjusted.

If the warning light comes on after blinking for 1 minute, the tire pressure warning system may be malfunctioning. Contact your Toyota dealer.

TIRE PRESSURE WARNING RESET SWITCH.

When initializing the system, the present tire inflation pressure is stored as standard. The tire pressure warning system determines decreased air pressure by comparing the present and the standard tire inflation pressures. When you change the set tire inflation pressure, it is necessary to initialize the tire pressure warning system.

  • When changing the tire size.
  • When rotating the tire on vehicles differing with front and rear tire inflation pressure.

To initialize the system, perform the following:

  1. Park the vehicle in a safe place and turn the ignition key to “OFF” position.
  2. Adjust the pressure of all the installed tires to the specified cold tire inflation pressure level.
  3. Turn the ignition key to the “ON” position.
  4. Push and hold the tire pressure warning reset switch until the tire pressure warning light blinks slowly three times.
  5. Leave for a few minutes with the ignition key in “ON” position, and then turn the ignition key to “OFF” position.

If you push the tire pressure reset switch while vehicle is moving, initialization is not performed. If you push the tire pressure reset switch accidentally and initialization is performed, adjust the tire inflation pressure to the specified level and initialize the system again.

If the tire pressure warning light does not blink slowly three times when you push and hold the reset switch, initialization has failed and the tire pressure warning system may not work properly. In this case, initialize the system again. If initialization cannot be performed, have the system checked at your Toyota dealer.

Do not push the reset switch without first adjusting the tire inflation pressure to the specified level. Otherwise, the tire pressure warning light may not come on even if the tire inflation pressure is low, or it may come on when the tire inflation pressure is actually normal.

That it is the full procedure how to reset tire pressure warning light Toyota Solara second generation. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Toyota cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders by yourself.

Reset low windshield washer fluid level warning light Toyota Solara

Reset low windshield washer fluid level warning light Toyota Solara second generation. From year: 2004, 2005, 2006, 2007, 2008.

How to reset low windshield washer fluid level warning light Toyota Solara 2 generation.

The light warns that the windshield washer fluid level is too low. Add washer fluid at your earliest opportunity.

Adding washer fluid.

If any washer does not work or the low windshield washer fluid level warning light comes on, the washer tank may be empty. Add washer fluid. You may use plain water as washer fluid. However, in cold areas where temperatures range below the freezing point, use washer fluid containing antifreeze. This product is available at your Toyota dealer and most auto parts stores. Follow the manufacturer’s directions for how much to mix with water.

Do not use engine antifreeze or any other substitute because it may damage your vehicle’s paint.

If the low windshield washer fluid level warning light is not gone means that a sensor is broken.

All information how can tou reset low windshield washer fluid level warning light is taken from Toyota Solara ownes manual.

That it is the full procedure how to reset low windshield washer fluid level warning light Toyota Solara second generation. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Toyota cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders by yourself.