Category Archives: Service light reset Mercury

Oil reset, oil light indicator, maintenance light reset, service light reset, without using a computer for Mercury

Oil service reset Mercury Monterey

Leave a reply

How do you reset maintenance light, reset service light indicator Mercury Monterey, year 2004, 2005, 2006, 2007. For reset maintenance light and that can be made manually by use button on car dash board.

Instructions to reset service indicator 2004-2007

  • Turn the ignition to run (one position before starting engine).
  • Press the STATUS control to access the System Check function.
  • Press RESET to reset oil %.
  • Press and hold the RESET control to set to 100%. After a successful reset, the message centre will display OIL LIFE SET TO 100%.
  • Turn the ignition off and then start the engine to verify the indicator has been reset.

Oil service reset Mercury Montego

Leave a reply

How do you reset maintenance light, reset service light indicator Mercury Montego, year 2005, 2006, 2007. For reset maintenance light and that can be made manually by use button on car dash board.

Instructions to reset service indicator 2005-2007

  • Turn the ignition to run (one position before starting engine).
  • Select this function from the SETUP control “PRESS RESET AT OIL CHANGE”.
  • Press RESET control to reset oil change.
  • Turn the ignition off and then start the engine to verify the indicator has been reset.

Oil service reset Mercury Mountaineer

Leave a reply

How do you reset maintenance light, reset service light indicator Mercury Mountaineer, year 1999. 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010. For reset maintenance light and that can be made manually by use button on car dash board.

Instructions to reset service indicator 1999-2010

1999-2001

Turn the ignition to run (one position before starting engine).
press and hold the OIL CHANGE RESET control for 5 seconds. The message centre will count down for 5 seconds and the message centre will display “OIL LIFE RESET TO 100%”.
Turn the ignition off and then start the engine to verify the indicator has been reset.

2002-2003

Turn the ignition to run (one position before starting engine).
Press the SETUP control to access the System Check function.
Press and release the RESET control to display “OIL LIFE XX% HOLD RESET NEW”.
Press and hold the RESET control for 2 seconds to display “IF NEW OIL HOLD RESET”.
Press and hold the RESET control to display “OIL LIFE SET TO 100%”. Your oil life is now reset.
Turn the ignition off and then start the engine to verify the indicator has been reset.

2004-2005

Turn the ignition to run (one position before starting engine).
Select this function from the SETUP control “PRESS RESET AT OIL CHANGE”.
Press RESET control to reset oil change.
Turn the ignition off and then start the engine to verify the indicator has been reset.

2006-2007

Turn the ignition to run (one position before starting engine).
Enter SYSTEM CHECK to display “OIL XXX% OIL LIFE OK”.
Press RESET button to display “HOLD RESET IF NEW OIL”.
Press and hold the RESET button for more than two seconds. Oil life is set to 100% and “OIL CHANGE SET TO 100%” is displayed.
Turn the ignition off and then start the engine to verify the indicator has been reset.

2008-2010

Turn the ignition to run (one position before starting engine).
Press SETUP to display OIL LIFE %.
Press RESET button to display “HOLD RESET IF NEW OIL”.
Press and hold the RESET button for more than two seconds. Oil life is set to 100% and “OIL CHANGE SET TO 100%” is displayed.
Turn the ignition off and then start the engine to verify the indicator has been reset.

Oil service reset Mercury Sable

1 Reply

How do you reset maintenance light, reset service light indicator Mercury Sable, year 2008, 2009, 2010. For reset maintenance light and that can be made manually by use button on car dash board.

Instructions to reset service indicator 2008-2010

  • Turn the ignition to run (one position before starting engine).
  • Press and release SETUP to display “OIL LIFE XXX% HOLD RESET = NEW”.
  • Press and hold RESET for 2 seconds and release to reset the oil life to 100%.
  • Turn the ignition off and then start the engine to verify the indicator has been reset.

Mercury-Sable-Controls

Oil service reset Mercury Milan

Leave a reply

How do you reset maintenance light, reset service light indicator Mercury Milan, year 2008, 2009, 2010. For reset maintenance light and that can be made manually by use button on car dash board.

Instructions to reset service indicator 2008-2010

  • Turn the ignition to run (one position before starting engine).
  • Press and release SETUP to display “OIL LIFE XXX% HOLD RESET = NEW”.
  • Press and hold RESET for 2 seconds and release to reset the oil life to 100%.
  • Turn the ignition off and then start the engine to verify the indicator has been reset.