Tag Archives: ignition

Servive light reset oil life indicator dashboard Subaru XV Crosstrek

Leave a reply

How do you reset maintenance light, reset service light indicator Subaru XV Crosstrek, year 2014, 2015. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Subaru XV Crosstrek, year 2014, 2015 oil reset instructions:

  1. Turn the ignition to run.
    *one position before starting engine
  2. Using the controsl on the left hand side of the steering wheel. Pull the i/Set button towards you to bring up the selection screen.
  3. Use the Up or Down arrow to highlight the MAINTENANCE menu and pull the i/Set switch towards you.
  4. Select the maintenance item (i.e. Engine Oil, Oil Filter) and pull the i/SET switch towards you.
  5. Change the next service date and interval with the Up and Down arrow and confirm by highlighting SET and pull the i/SET switch towards you. The reset is complete when the screen shows Setting Complete.
  6. Turn the ignition off and then start the engine to verify the indicator has been reset.

Servive light reset oil life indicator dashboard Lincoln MKZ

Leave a reply

How do you reset maintenance light, reset service light indicator Lincoln MKZ, year 2014, 2015. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Lincoln MKZ, year 2014, 2015 oil reset instructions:

  1. Turn the ignition to run (one position before starting engine/ one push of START/STOP button).
  2. Using the arrow keypad (left of steering wheel) select SETTINGS.
  3. From the SETTINGS menu select VEHICLE.
  4. From the VEHICLE menu select OIL LIFE RESET followed by OK.
  5. Turn the ignition off and then start the engine to verify the indicator has been reset.

Servive light reset oil life indicator dashboard Chevrolet Camaro

Leave a reply

How do you reset maintenance light, reset service light indicator Chevrolet Camaro, year 2014, 2015. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Chevrolet Camaro, year 2014, 2015 oil reset instructions:

  1. Turn the ignition to run.
    *one position before starting engine
  2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
  3. If the “Change Engine Oil Soon” message is not on, the system is reset. If it is on, turn the ignition off and repeat steps 1-2.
  4. Turn the ignition off and then start the engine to verify the indicator has been reset.

Reset service light oil life indicator dashboard Jeep Wrangler

Leave a reply

How do you reset maintenance light, reset service light indicator Jeep Wrangler, year 2014, 2015. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Jeep Wrangler, year 2014, 2015 oil reset instructions:

  1. Turn the ignition to run.
    *one position before starting engine
  2. Fully depress the accelerator pedal slowly three times within 10 seconds.
  3. Turn the ignition off and then start the engine to verify the indicator has been reset.

Reset service light oil life indicator dashboard Honda CR-Z

Leave a reply

How do you reset maintenance light, reset service light indicator Honda CR-Z, year 2014, 2015. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Honda CR-Z, year 2014, 2015 oil reset instructions:

  1. Turn the ignition to run (one position before starting engine).
  2. Display the engine oil life by repeatedly pressing the UP or DOWN button on the steering wheel.
  3. Press and hold the SEL/RESET for more than 10 seconds. The oil life reset mode is displayed on the multi information display.
  4. Select RESET with the UP or DOWN button, then press the SEL/RESET button. The engine oil life will reset to 100.
  5. Turn the ignition off and then start the engine to verify the indicator has been reset.