Tag Archives: vehicle

Reset service light oil life indicator dashboard Chevrolet Silverado

Leave a reply

How do you reset maintenance light, reset service light indicator Chevrolet Silverado, year 2013, 2014, 2015. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Chevrolet Silverado, year 2013, 2014, 2015 oil reset instructions:

  1. Turn the ignition to run (one position before starting engine).
  2. *Display the OIL LIFE REMAINING on the DIC (i button). If the vehicle does not have DIC buttons, the vehicle must be in P (Park) to access this display by pressing the trip odometer reset stem.
  3. Press and hold the SET/RESET (arrow) button on the DIC, or the trip odometer reset stem if the vehicle does not have DIC buttons for more than 5 seconds. The oil life will change to 100%.
  4. Turn the ignition off and then start the engine to verify the indicator has been reset.
    *Remaining oil life can also be reset by depressing the gas pedal 3 times within 5 seconds instead of using the DIC.

Reset service light oil life indicator dashboard Ford Escape

Leave a reply

How do you reset maintenance light, reset service light indicator Ford Escape, year 2013, 2014, 2015. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Ford Escape, year 2013, 2014, 2015 oil reset instructions:

  1. Turn the ignition to the on position (do not start the engine).
  2. Press both the accelerator and brake pedals at the same time.
  3. Keep both pedals fully pressed.
  4. After three seconds, the Service: Oil reset in prog. message will be displayed.
  5. After 25 seconds, the Service: Oil reset complete message will be displayed.
  6. Release both the accelerator and brake pedals.
  7. The Service: Oil reset complete message will no longer be displayed.
  8. Rotate the key to the off position. For vehicles with push-button start, press the start button to turn the vehicle off completely.

Reset service light oil life indicator dashboard Buick Enclave

Leave a reply

How do you reset maintenance light, reset service light indicator Buick Enclave, year 2014, 2015. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Buick Enclave, year 2014, 2015 oil reset instructions:

  1. Turn the ignition to run (one position before starting engine).
  2. Press the vehicle information button (i) until OIL LIFE REMAINING displays.
  3. Press and hold the SET/RESET (check mark) button until 100% is displayed. You will hear 3 chimes and the CHANGE ENGINE OIL SOON message will go off.
  4. Start the engine and verify CHANGE OIL SOON light goes out (if this does not happen, turn off the engine and repeat steps).

Oil reset service light indicator Chevrolet Cruze

Leave a reply

How do you reset maintenance light, reset service light indicator Chevrolet Cruze, year 2012. For reset maintenance light and that can be made manually by use button on car dash board.

  1. Turn the ignition to run (one position before starting engine).
  2. Press the DIC menu button on the turn signal lever to enter the vehicle information menu. Use the thumbwheel to scroll through the menu items until you reach REMAINING OIL LIFE.
  3. Press the SET/CLR button to reset the oil life to 100%. When prompted, use the thumbwheel to select YES or NO. Press the SET/CLR button to confirm.
  4. Turn the ignition off and then start the engine to verify the indicator has been reset.

Reset oil service light indicator Fiat Ducato 3

Leave a reply

How do you reset maintenance light, reset service light indicator Fiat Ducato 3. For reset maintenance light and that can be made manually by use button on car dash board. From year : 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014.

How to reset warning service light on a Fiat Ducato III.

Scheduled servicing ( service ) Fiat Ducato third generation.

Through this function it is possible to display information connected to proper vehicle servicing.

Proceed as follows:

  • Briefly press button MODE: service in km or mi, according to previous setting, will be displayed see paragraph “Units”.
  • Briefly press button MODE to go back to the menu screen or press the button for long to go back to the standard screen.

The “Service schedule” plans different service intervals according to engine models; service interval is displayed automatically, with the ignition key at MAR, starting from 2,000 km (or 1,240 mi) from this deadline and it is shown again every 200 km (or 124 mi). Oil change warning messages are displayed in the same way. Use buttons ▲ and ▼ to display alternately service schedule info and engine oil change info. Below 200 km servicing indications are displayed more frequently. Service indications will be displayed in km or mi according to previous unit setting. When a programmed maintenance interval (coupon) is near to come, turning the ignition key to MAR, the display will show the message “ Service ” followed by the number of km/mi to go before vehicle servicing. Contact a Fiat Dealership to carry out any service operation provided by the “Service schedule” and to reset the display.