Tag Archives: mileage

How reset trip odometer display indicates Fiat 500

Fiat 500 odometer / trip odometer / electronic vehicle information center (EVIC) display area.

Reset trip odometer Fiat 500. From year: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014.

This display indicates the total distance the vehicle has been driven. U.S. Federal regulations require that upon transfer of vehicle ownership, the seller certify to the purchaser the correct mileage that the vehicle has been driven. If your odometer needs to be repaired or serviced, the repair technician should leave the odometer reading the same as it was before the repair or service. If s/he cannot do so, then the odometer must be set at zero, and a sticker must be placed in the door jamb stating what the mileage was before the repair or service. It is a good idea for you to make a record of the odometer reading before the repair/ service, so that you can be sure that it is properly reset, or that the door jamb sticker is accurate if the odometer must be reset at zero.

If the vehicle is equipped with the Electronic Vehicle Information Center (EVIC) in the instrument cluster, all warnings including “door” and “gate” and “Change Engine Oil” will only be displayed in the EVIC display. For additional information, refer to “Electronic Vehicle Information Center (EVIC).” Refer to the “Electronic Vehicle Information Center (EVIC)” for further information.

ELECTRONIC VEHICLE INFORMATION CENTER (EVIC).

The Electronic Vehicle Information Center (EVIC) features a driver-interactive display that is located in the instrument cluster.

Oil reset service light indicator Range Rover Sport

How do you reset service light indicator Range Rover Sport. From year: 2007.

Reset service light indicator Range Rover Sport. How to reset maintenance light, reset oil service light. Can be made manually by use button on car dash board.

Instructions:

  1. Turn off the cars ignition.
  2. Hold down the reset button on the dash board to zero the mileage. keep it held in.
  3. Turn the cars ignition on, but do not start. Keep the button in for 5 seconds.
  4. A menu will come up, like date/mileage.
  5. Let go and then press the button again.
  6. It will toggle through some options, then get to rst.
  7. Press the button again, and your done.

Oil reset service light indicator Opel Signum

How to reset service light indicator Opel Signum.

Reset service light indicator Opel Signum. From years: 2003, 2004, 2005, 2006, 2007, 2008.

  1. Get into the car and shut all doors.
  2. Wait for the milage (km) and displays to go off .
  3. Press and hold the trip reset button.
  4. Put you foot on the brake, press and hold down.
  5. Turn on the ignition to the point where all the lights come on, do not start the engine.
  6. On the dysplay will appear message, InSP with four dashes “- – – – ” , the InSP will flash, do not release the trip button and brake pedal.
  7. Continue to hold the trip button and brake pedal for about 15 seconds.
  8. At this point InSP will stop flash and then the reset mileage 15,000-30,000 (depends on how many km/milage is set your car).
  9. Now you can release the trip button and brake pedal, the indicator is reset.

Oil reset service light indicator Skoda Fabia Mk1

How to reset service light indicator Skoda Fabia Mk1.

Reset service light indicator Skoda Fabia Mk1. From year: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007.

  1. With the ignition off, with all doors closed.
  2. Press and hold the button situated on the right of the dashboard, next to mileage (km/h)
  3. Turn the ignition to on, without starting the engine.
  4. Release the button and pressed again fore 1 second until the display shows service InSP message
  5. Rotat the same button to the right, until service – – – is displayed
  6. Now press again the button and that was it, the service interval has been reset.

 

Reset service light indicator Renault Modus

Reset service light indicator Renault Modus. From year: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012.

How to reset service light indicator Renault Modus.

1. To reset the mileage before service on a Renault Modus, follow this steps.
2. Select the miles/km to service display on the trip computer.
3.Repeatedly push and hold one of the two buttons on the end of the windscreen wiper stalk for about 10 seconds until the mileage is reset and the display shows the mileage before maintenance service permanently.