Instructions how reset service light indicator Opel Corsa D. From years: 2006, 2007, 2008, 2009, 2010, 2011, 2012.

There are two ways to reset service light Opel Corsa d.

1. How to reset service light indicator Opel Corsa D.

1. Get into the car and shut all doors.
2. Wait for the milage (km) and displays to go off .
3. Press and hold the brake pedal.
4. Press and hold the trip reset button at the same time with the brake.
5. Turn on the ignition to the point where all the lights come on, do not start the engine.
6. The mileage (km) will come up on the dash and then InSP with four dashes “—-” will appear, do not release the trip button and brake pedal.
7. Continue to hold the trip button and brake pedal for about 15 seconds.
8. At this point it should flash up insp and then the reset mileage 15,000-30,000.
9. Now you can release the trip button and brake pedal, the indicator is reset.

2. How do you reset service light indicator Opel Corsa D.

1. Ignition OFF.
2. Press and hold reset trip odometer button.
3. Turn the ignition on, one position before starting engine.
4. The letters InSP and symbol “- – – – ” will appear in the display.
5. Kepp the trip odometer button for about 15 seconds.
6. At this point it should flash up insp and then the reset mileage 15,000-30,000.
7. Release trip odometer button and switch ignition off.

Inspection system Opel Corsa D. In order to guarantee economical and safe vehicle operation and to maintain the value of your vehicle, it is of vital importance that all maintenance work is carried out at the proper intervals.
If the service interval remaining distance is less than 1500 km, InSP is displayed with a remaining distance of 1000 km when the ignition is switched on and off. If less than 1000 km remains, InSP is displayed for several seconds. Have the next service performed by a workshop within one week or 500 km (whichever occurs first).