Tag Archives: trip computer

Reset trip computer Fiat Fiorino

How to reset trip computer Fiat Fiorino.

Reset trip computer Fiat Fiorino. From year: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014.

The “Trip computer” is used to display information on vehicle operation when the key is turned to MAR. This function allows to define two separate trips called “ Trip A ” and “ Trip B ” for monitoring the “ complete mission ” of the vehicle ( trip ) in a reciprocally independent manner. Both functions are resettable ( reset – start of new mission ).

“ Trip A ” is used to display data relating to:

  • Range.
  • Trip distance.
  • Average consumption.
  • Instant consumption
  • Average speed
  • Travel time (driving time).

“Trip B” is supplied on versions having a multifunctional display and is used to display data relating to:

  • Trip distance B.
  • Average consumption B.
  • Average speed B.
  • Travel time B (driving time).

Note “ Trip B ” functions may be disabled ( see paragraph “ Trip B on ”). “ Range ” and “ Instant consumption ” cannot be reset.

Values displayed.

Range.

Indicates the travel distance left before the vehicle runs out of the fuel in the tank. The message “—-” will appear on the display in the following cases:

value lower than 50 km (or 30 mi).
vehicle left parked with engine running for long.
IMPORTANT Changes of the range value can be affected by many factors: driving style (see paragraph “Driving style” in section “Starting and driving”), type of route (motorway, urban cycle, mountain roads, etc…), conditions of use of the vehicle (load, tyre pressure, etc…). Trip planning must take into account the above notes.

Trip distance.

Indicates the distance covered from the start of a new mission.

Average consumption.

Represents the approximate average consumption from the start of a new mission.

Instant consumption

Indicates the fuel consumption. The value is constantly updated. The message “—-” will appear on the display if the vehicle is parked with the engine running.

Average speed

Represents the vehicle average speed as a function of the overall time elapsed since the start of a new mission.

Trip time

Indicates the time elapsed since the start of a new mission.

IMPORTANT If information is not available, the message “—-” will appear instead of the Trip Computer values. Counting of the different values will be resumed regularly when normal operation is restored. This will not cause any resetting of the values displayed before the failure nor starting a new mission.

Reset trip computer Fiat Fiorino

TRIP control button fig. 19

Button TRIP located on the top of the right steering column stalk is used (with ignition key at MAR) to display and reset the previously described values to start a new mission:

short pressing to display the different values;
prolonged pressing to reset and then start a new mission.
New mission

The new mission begins after:

“manual” resetting by the user, by pressing the relevant button;
“automatic” resetting, when the “Trip distance” reaches 3999.9 km or 9999.9 km (according to the type of display) or when the “Trip time” reaches 99.59 (99 hours and 59 minutes);
disconnection/reconnection of the battery.
IMPORTANT Value resetting from the screens of “Trip A” makes it possible to exclusively reset the data regarding this function.

IMPORTANT Value resetting from the screens of “Trip B” makes it possible to exclusively reset the data regarding this function.

“Start trip” procedure.

With ignition key on MAR, press and hold button TRIP pressed for over 2 seconds to reset.

Exit Trip.

To exit the Trip function: hold MENU ESC pressed for longer than 2 seconds.

All information how to reset trip computer is taken from Fiat Fiorino owners manual.

That it is the full procedure how to reset trip computer Fiat Fiorino. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Toyota cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders by yourself.

This is an information site where you can solve your car problems. Send us a comment if our procedures are correctly. If you would have anything to add, for us every opinion counts.

Reset service light indicator Renault Modus

Reset service light indicator Renault Modus. From year: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012.

How to reset service light indicator Renault Modus.

1. To reset the mileage before service on a Renault Modus, follow this steps.
2. Select the miles/km to service display on the trip computer.
3.Repeatedly push and hold one of the two buttons on the end of the windscreen wiper stalk for about 10 seconds until the mileage is reset and the display shows the mileage before maintenance service permanently.

Oil reset light service indicator Renault Scenic

How do you reset maintenance light, reset service light indicator Renault Scenic. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Renault Scenic, oil reset instructions:

To reset the service indicator on the scenic II is as follows:
Scroll through the trip computer using the button on the end of the right hand stalk control until you get to the miles till service indicator (or the “change oil soon message” will appear if due)
Then press and hold the same button in and hold it. The miles indicator will then flash then change to 18000, keep the button pressed until the 18000 stops flashing.

NOTE: If the word “service” appears on your dash then that does NOT mean that a service is due. It is an indication that the vehicle is faulty and has a stored major fault code.

The indicator that a Service is due is when the words “change oil soon” appears or the spanner starts flashing.

Oil service light reset indicator Renault Megane Scenic

How do you reset maintenance light, reset service light indicator Renault Megane Scenic. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Renault Megane Scenic, oil reset instructions:

The procedure for the Mégane II (2002-2006, pre-facelift model) is:

Scroll through the trip computer until you get to the “change oil soon message/miles to next service” displayed.
Press and hold the mileage trip reset button on the speedo untill the display flashes, and then stays fixed. This can take a few seconds.

Reset the service indicator light on Renault Megane Scenic 2005

How do you reset maintenance light, reset service light indicator Renault Megane Scenic 2005. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Renault Megane Scenic, oil reset instructions:

If you mean the spanner symbol & message such as ‘change oil soon’ just scroll through your trip computer as you do when you zero your trip mileage when you fill up with petrol.
(press top button of right hand stalk).
Scroll through trip mileage/ averages etc until you get to the change oil message and then clear it the same way you clear your trip mileage by holding the button in until the message flashes & clears.