Tag Archives: maintenance light

Service light reset dashboard BMW X5 and BMW X6

Leave a reply

How do you reset maintenance light, reset service light indicator BMW X5 and BMW X6, year 2000-2013. For reset maintenance light and that can be made manually by use button on car dashboard.

Reset oil service light, engine oil life BMW X5 and BMW X6, year 2000-2013 oil reset instructions:

  1. Turn the ignition to the ON position with the vehicle off (close all doors and windows and put the vehicle in park)
  2. Press and hold the TRIP reset button for about 10 seconds until the first service job appears in the display
  3. Release the button and press it again repeatedly to select the desired maintenance item to reset (oil can indicates the oil change)
  4. To reset, press and hold the TRIP button again fro 3-5 seconds or until the display shows “Reset?”
  5. Release the button, then press and hold it again for another 3 seconds or until the display shows “—-”, then release the button
  6. Repeat the above procedure for any other services to be reset e.i., brakes, spark plugs, or filters
  7. Turn the ignition to the OFF position and back on to confirm reset was successful

Oil service reset maintenance oil light reset Ford F-150, 2014

Leave a reply

How do you reset maintenance light, reset service light indicator Ford F-150, year 2014. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Ford F-150, oil reset instructions:

  1.  Turn the ignition on (do not start the engine).
  2.  Press and release the SETUP button to display “OIL LIFE XXX% HOLD RESET = NEW”.
  3.  Press and hold the RESET button for two seconds and release to reset the oil life to 100%.
  4.  Turn the ignition off and then start the engine to verify the indicator has been reset.

Reset oil service Suzuki Grand Vitara diesel 2013

Leave a reply

How do you reset maintenance light, reset service light indicator Suzuki Grand Vitara. For reset maintenance light and that can be made manually by use button on car dash board.

Remove dash service light Suzuki Grand Vitara 1.9, diesel 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014.

Instructions

  • Ignition on (engine not running)
  • Foot on accelerator all the way down
  • At the same time pump the brake pedal 3 times

This must be done within 10 seconds of turning ignition on.

Reset oil maintenance required Toyota Venza

Leave a reply

How do you reset maintenance light, reset service light indicator Toyota Venza, From year: 2008, 2009, 2010, 2011, 2012, 2013. For reset maintenance light and that can be made manually by use button on car dashboard.

Reset service light indicator, engine oil life Toyota Venza, oil reset instructions:

The oil change system should be reset. Perform the following procedures:

  1. Switch the display to the trip meter A when the engine is running. See below picture.
  2. Vehicles with smart key system: turn the “ENGINE START STOP” switch off. Vehicles without smart key system: turn the engine switch to the “LOCK” position.
  3. Vehicles with smart key system: while pressing the trip meter reset button, set the “ENGINE START STOP” switch to IGNITION ON mode but do not start the engine because otherwise the reset mode will be canceled. Continue to press and hold the trip meter reset button until the trip meter displays “000000”.
  4. Vehicles without smart key system: while pressing the trip meter reset button, set the engine switch to “ON” position but do not start the engine because otherwise the reset mode will be canceled. Continue to press and hold the trip meter reset button until the trip meter displays “000000”.
  5. See below picture with trip meter reset button.

All information how to reset engine oil maintenance indicator is taken from Toyota Venza owners manual.

Reset service light oil life indicator dashboard Mazda 6

Leave a reply

How do you reset maintenance light, reset service light indicator Mazda 6, year 2013, 2014. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Mazda 6, year 2013, 2014 oil reset instructions:

  1. Turn the ignition to run (do not start the engine).
  2. Press the UP or DOWN part of the INFO switch to highlight the SETTINGS menu and press the INFO button to confirm.
  3. Scroll to MAINTENANCE and press the INFO button to confirm.
  4. Scroll to the item that needs to be reset (SCHEDULED, TIRE ROTATION, TIRE PRESSURE) and confirm with the INFO button.
  5. Scroll to SET TIME or SET DISTANCE and confirm with the INFO button.
  6. Turn the ignition off and then start the engine to verify the indicator has been reset.

mazda6 reset indicator lightmazda6 reset indicator light2 2