Tag Archives: switch

Reset service light oil life indicator dashboard Lexus RX

How do you reset maintenance light, reset service light indicator Lexus RX, year 2014, 2015. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Lexus RX, year 2014, 2015 oil reset instructions:

  1. Turn the ignition to run (push START/STOP button once). Use the trip meter switch to bring up the trip meter A reading. Turn the ignition off.
  2. While pressing the “ODO/TRIP” button, set the engine switch to run (push START/STOP button once).
  3. Continue holding the “ODO/TRIP button for about 5 seconds. The resetting procedure is complete when “000000” in the trip metre flashes once and the message in the multi information display disappears.
  4. Turn the ignition off and then start the engine to verify the indicator has been reset.

Reset service light oil life indicator dashboard Scion xB

How do you reset maintenance light, reset service light indicator Scion xB, year 2014, 2015. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life maintenance data reset Scion xB, year 2014, 2015 oil reset instructions:

  1. Start the engine.
    *one position before starting engine
  2. Select trip metre A reading by using the trip metre button and then turn the ignition off.
  3. While pressing the trip meter reset button, turn the engine switch to the ON position (do not start the engine or the reset process will be cancelled). Continue to press and hold the button until the trip metre displays “000000”.
  4. Turn the ignition off and then start the engine to verify the indicator has been reset.

Reset service light oil life indicator dashboard Scion iQ

How do you reset maintenance light, reset service light indicator Scion iQ, year 2013, 2014, 2015. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Scion iQ, year 2013, 2014, 2015 oil reset instructions:

  1. With the engine running switch the display to trip metre A. Turn the engine off.
  2. While pressing the MODE button, turn the engine switch to the ON position (do not start the engine or the reset process will be cancelled). Continue to press and hold the button until the trip metre displays “000000”.
  3. Turn the ignition off and then start the engine to verify the indicator has been reset.

Reset the auto up feature Fiat 500

How to reset the auto up feature Fiat 500.

Reset the auto up feature Fiat 500. From year : 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014.

Should the Auto Up feature stop working, the window probably needs to be reset. To reset Auto Up:

  • Pull the window switch up to close the window completely and continue to hold the switch up for an additional two seconds after the window is closed.
  • Push the window switch down firmly to the second detent to open the window completely and continue to hold the switch down for an additional two seconds after the window is fully open.

Wind buffeting Fiat 500.

Wind buffeting can be described as the perception of pressure on the ears or a helicopter-type sound in the ears. Your vehicle may exhibit wind buffeting with the windows down, or the sunroof (if equipped) in certain open or partially open positions. This is a normal occurrence and can be minimized. If the buffeting occurs with the sunroof open, adjust the sunroof opening to minimize the buffeting or open any window.

Reset oil maintenance required Toyota Venza

How do you reset maintenance light, reset service light indicator Toyota Venza, From year: 2008, 2009, 2010, 2011, 2012, 2013. For reset maintenance light and that can be made manually by use button on car dashboard.

Reset service light indicator, engine oil life Toyota Venza, oil reset instructions:

The oil change system should be reset. Perform the following procedures:

  1. Switch the display to the trip meter A when the engine is running. See below picture.
  2. Vehicles with smart key system: turn the “ENGINE START STOP” switch off. Vehicles without smart key system: turn the engine switch to the “LOCK” position.
  3. Vehicles with smart key system: while pressing the trip meter reset button, set the “ENGINE START STOP” switch to IGNITION ON mode but do not start the engine because otherwise the reset mode will be canceled. Continue to press and hold the trip meter reset button until the trip meter displays “000000”.
  4. Vehicles without smart key system: while pressing the trip meter reset button, set the engine switch to “ON” position but do not start the engine because otherwise the reset mode will be canceled. Continue to press and hold the trip meter reset button until the trip meter displays “000000”.
  5. See below picture with trip meter reset button.

All information how to reset engine oil maintenance indicator is taken from Toyota Venza owners manual.