Tag Archives: process

Reset service light oil life indicator dashboard Scion iQ

How do you reset maintenance light, reset service light indicator Scion iQ, year 2013, 2014, 2015. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Scion iQ, year 2013, 2014, 2015 oil reset instructions:

  1. With the engine running switch the display to trip metre A. Turn the engine off.
  2. While pressing the MODE button, turn the engine switch to the ON position (do not start the engine or the reset process will be cancelled). Continue to press and hold the button until the trip metre displays “000000”.
  3. Turn the ignition off and then start the engine to verify the indicator has been reset.

Vauxhall Zafira Service (INSP) Light Reset

How do you reset maintenance light, reset service light indicator Vauxhall Zafira. For reset maintenance light and that can be made manually by use button on car dashboard.

Reset service light indicator, engine oil life Vauxhall Zafira, oil reset instructions:

This procedure is for the Vauxhall Zafira A Service (INSP) Light Reset

With your left hand press and hold the trip reset button.

With your right hand insert key into the ignition.

Turn key to position “II” ignition lights on engine NOT started.

Keeping the trip reset button pressed you will see “INSP” and after a while “_ _ _” will be displayed.

Turn key to the “OFF” position thn release the trip reset button.

Turn key to position “II” ignition lights on engine NOT started.

That completes the service light reset for the Vauxhall Zafira A.

R P SERVICES would like to state that this process should only be used after the vehicle has been serviced.

Reset oil maintenance light on 2007 ford explorer

Reset service light indicator, engine oil life Ford explorer, year 2007 reset instructions:

The directions that come with your vehicle are lousy, and the process stinks to. And keep in mind that if you do not press the buttons fast enough, or hold long enough, you must start over. It usually takes a few tries. Here’s how to do it:

1.) Press the TRIP/RESET button to cycle to “SETUP MENU HOLD RESET”.
2.) Now press and hold the button for 2 seconds until “RESET FOR SYSTEM CHECK” is displayed, then release.
3.) Imediately press and hold button for 2 more seconds until “Oil 100% RESET IF NEW” is displayed, then release.
4.) Imediately press button once to display “HOLD RESET IF NEW OIL” and release.
5.) Imediately press and hold button for 2 seconds until “OIL LIFE SET TO 100%” is displayed.

If you have done this dance properly, without delaying too long between steps, you are done. What a pain in the butt just to reset the oil maintenance light!!!

Service light reset indicator Ford Galaxy

Reset service light indicator, engine oil life Ford Galaxy, reset instructions:

With the ignition off, press the reset button under the mileage counter
Hold in reset button whilst turning the ignition on
After about 4 or 5 seconds (up to 30 seconds in some cases) the display should reset itself
Release the button and turn the ignition off
It may be necessary to repeat this process