Tag Archives: service light indicator

Reset service light oil life indicator dashboard Mazda 6

How do you reset maintenance light, reset service light indicator Mazda 6, year 2013, 2014. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Mazda 6, year 2013, 2014 oil reset instructions:

  1. Turn the ignition to run (do not start the engine).
  2. Press the UP or DOWN part of the INFO switch to highlight the SETTINGS menu and press the INFO button to confirm.
  3. Scroll to MAINTENANCE and press the INFO button to confirm.
  4. Scroll to the item that needs to be reset (SCHEDULED, TIRE ROTATION, TIRE PRESSURE) and confirm with the INFO button.
  5. Scroll to SET TIME or SET DISTANCE and confirm with the INFO button.
  6. Turn the ignition off and then start the engine to verify the indicator has been reset.

mazda6 reset indicator lightmazda6 reset indicator light2 2

Oil reset service light indicator Jeep Compass

How do you reset maintenance light, reset service light indicator Jeep Compass, year 2008, 2009, 2010, 2011, 2012, 2013, 2014. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Jeep Compass, oil reset instructions:

  1. Turn the ignition to run (one position before starting engine).
  2. Fully depress the accelerator pedal slowly three times within 10 seconds.
  3. Turn the ignition off and then start the engine to verify the indicator has been reset.

Oil reset service light indicator Opel Agila

How to reset service light indicator Opel Agila A. From years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007.

Reset service light indicator Opel Agila. From years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012.

  1. Ignition OFF, the display in the instrument cluster must show the trip odometer.
  2. Press and hold trip odometer button.
  3. Turn on the ignition.
  4. Keep trip odometer button button pressed for at least 15 seconds longer until the service interval indicator changes.
  5. After approximately 15 seconds the display on the instrument cluster displays the symbol with the maximum mileage (km) and InSP for 2 seconds.
  6. After a successful reset, the message “- – – -” appears in the display until the actuating knob is released.
  7. Then the distance travelled or the time display appears again.

How do you reset service light indicator Opel Agila B. From years: 2008, 2009, 2010, 2011, 2012.

  1. Start with key in, ignition OFF.
  2. Press and hold both buttons (clock button and trip reset button) on the instrument cluster button.
  3. Turn ignition ON, do not start the car.
  4. Keep holding clock button and trip reset button until on the display will appear InSP message, the indicator will flash three times and change to three dashes “- – – “.
  5. Release the buttons.
  6. Turn ignition OFF.
  7. Turn ignition back ON to confirm that the service light indicator was reset.

In the case of vehicles with fixed engine oil change and service intervals, InSP appears in the odometer display if the ignition is switched on when servicing is overdue: have the next service carried out within one week or 300 miles (500 km). Seek the assistance of a workshop. After the service is complete, have the display reset.

Indicates when the engine oil and oil filter require changing. Based on driving conditions, the interval at which an oil change will be indicated can vary considerably. When the system has calculated that oil life has been diminished, control indicator I flashes in the instrument cluster when the engine is running. Engine oil and oil filter need changing immediately. Engine power may be decreased. For the system to work properly, it must be reset every time the engine oil and oil filter are changed: seek the assistance of a workshop.

Oil reset service light indicator Opel Agila B

How to reset service light indicator Opel Agila B.

Reset service light indicator Opel Agila B. From years: 2008, 2009, 2010, 2011, 2012.

 

  1. Start with key in, ignition OFF.
  2. Press and hold both buttons (clock button and trip reset button) on the instrument cluster.button.
  3. Turn ignition ON, do not start the car.
  4. Keep holding clock button and trip reset button until on the display will appear InSP message, the indicator will flash three times and change to three dashes “- – – “.
  5. Release the buttons.
  6. Turn ignition OFF.
  7. Turn ignition back ON to confirm that the service light indicator was reset.

Reset oil service light Subaru Forester

How to reset oil service light Subaru Forester 2014.

Reset service light indicator, engine oil life Subaru Forester, year 2014 reset instructions:

  1. Turn the ignition to run (one position before starting engine).
  2. Using the controsl on the left hand side of the steering wheel. Pull the i/Set button towards you to bring up the selection screen.
  3. Use the Up or Down arrow to highlight the MAINTENANCE menu and pull the i/Set switch towards you.
  4. Select the maintenance item (i.e. Engine Oil, Oil Filter) and pull the i/SET switch towards you.
  5. Change the next service date and interval with the Up and Down arrow and confirm by highlighting SET and pull the i/SET switch towards you. The reset is complete when the screen shows Setting Complete.
  6. Turn the ignition off and then start the engine to verify the indicator has been reset.