Tag Archives: service light indicator

Reset oil service light indicator Chevrolet Corvette

Reset service light indicator, engine oil life Chevrolet Corvette, year: 1982-2010, oil reset instructions:

Reset oil service light indicator Chevrolet Corvette. Corvette C3 and C4 from years: 1982, 1983, 1984, 1985, 1986, 1987,  1988, 1989, 1990, 1991.  Corvette C4 from years: 1992, 1993, 1994, 1995, 1996. Corvette C5 from years: 1997, 1998, 1999, 2000. Corvette C6 and C5 from years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010.

How do you reset reset oil service light indicator Chevrolet Corvette. 

Third generation Chevrolet Corvette C3 and fourth generation Chevrolet Corvette C4.

From years: 1982, 1983, 1984, 1985, 1986, 1987,  1988, 1989, 1990, 1991.

  1. Turn the ignition to run, one click before starting. Press ENG/MET button and release. Then press ENG/MET button again within 5 seconds.
  2. Within 5 seconds of step 1. Press and hold the RANGE button until the change oil indicator begins to flash.
  3. Hold RANGE button until indicator stops flashing and goes out, about 10 seconds.
  4. Turn the ignition off and then start the engine to verify the indicator has been reset.

 

How to reset reset oil service light indicator Chevrolet Corvette. 

Reset oil service light indicator Chevrolet Corvette C4, fourth generation.

From years: 1992, 1993, 1994, 1995, 1996.

  1. Turn the ignition to run, one position before starting engine.
  2. Press ENG MET button on the trip monitor and release. Then press and release again within 5 seconds.
  3. Within 5 seconds of step 2, press and hold GAUGES button on trip monitor.
  4. Hold GAUGES button until change oil lamp stops flashing and goes out.
  5. Turn the ignition off and then start the engine. Now you can to verify if the indicator has been reset.

The full procedure how to reset oil service light indicator Chevrolet Corvette.

Reset oil service light indicator Chevrolet Corvette C5, fifth generation.

From years: 1997, 1998, 1999, 2000.

  1. Turn the ignition to run, one position before starting engine.
  2. Press the TRIP button on the DIC switch to view various menu choices and stop on OIL LIFE REMAINING. A message will display the % of oil life remaining.
  3. Press and hold the RESET button on the DIC switch for at least 2 seconds. A message will display the % of oil life remaining as 99 percent.
  4. Turn the ignition off and then start the engine. Now verify that the indicator has been reset.

 

How can you reset oil service light indicator Chevrolet Corvette.

Reset oil service light indicator Chevrolet Corvette C6 and Corvette c5.

From years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010.

  1. Turn the ignition to run, one position before starting engine.
  2. Press the TRIP button so the oil life % is displayed.
  3. Press the RESET and hold for 2 seconds.  OIL LIFE REMAINING 100% will appear.
  4. Turn the ignition off and then start the engine. Now verify that the indicator has been reset.

 

That it is the full procedure how to reset oil service light Chevrolet Corvette. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Chevrolet cars. Or any error which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders when by yourself.

 This is an information site where you can solve your car problems. Send us a comment if our procedures are correctly. If you would have anything to add, for us every opinion counts.

Reset oil service light indicator Toyota Tundra second generation

Reset oil service light indicator, engine oil life Toyota Tundra 2. From year: 2005-2014 reset instructions:

How to reset oil service light Toyota Tundra 2 generation.

This light acts as a reminder when to replace the engine oil. This light will come on when the ignition key is turned to “ON” and will go off after about a few seconds. When you drive for about 7200 km (4500 miles) after the engine oil replacement, this light illuminates for about 3 seconds and then flashes for about 12 seconds with the ignition key turned to the “ON” position. If you continue driving without replacing the engine oil, and if the distance driven exceeds 8000 km (5000 miles), the light will come on after the ignition key is turned to “ON” position. The light will remain on thereafter. If the light is flashing, we recommend that you replace the engine oil at an early opportunity depending on the driving and road conditions. If the light comes on, replace it as soon as possible.

The system must be reset after the engine oil replacement. Reset the system by the following procedure:

When tje Maint Requd appears on a Toyota Tundra you must follow this steps to reset the warning light.

1. Turn the ignition key to the “ACC” or “LOCK” position with the odometer reading shown.
2. Turn the ignition key to the “ON” position while holding down the trip meter reset knob. See below pictures.
3. On dash will appear ” – – – – – – ” who will blink.
4. Hold down the knob for at least 5 seconds. The odometer indicates “000000” and the light goes off.
5. If the system fails to reset, the light will continue flashing.

All information how can you reset oil service light is taken from Toyota Tundra second generation owners manual.

Reset the oil service light indicator for Volkswagen Tiguan

How do you reset service light indicator Volkswagen Tiguan year 2010, 2011, 2012, 2013

1. Turn the ignition to run (one position before starting engine).
2. Press and HOLD the trip-odometer button “0.0”.
3. Turn your key to run (one position before starting engine).
4. Release the trip-odometer button.
5. Push and release the Clock Minute Set Button “min”.
or
2. Use the rocker switch on the windshield wiper lever to select “Settings” and confirm with button underneath windshield wiper lever then follow steps 4-5.
or
3. Use the buttons on the right hand side of the multi function steering wheel
4. Select the “Settings” menu followed by the “Service” submenu. Select “Reset” and confirm.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.
*vehicles equipped with a navigation system can also access the reset menu from the SETTINGS button.

Reset the oil service light indicator for Volkswagen Passat

How do you reset service light indicator Volkswagen Passat year 2011, 2012, 2013

1. Turn the ignition off.
2. Press and hold the 0,0 button (located to the right of the instrument cluster).
3. Turn the igntion on (do not start the engine) and release the 0,0 button. Briefly press the double square button (located to the left of the instrument cluster).
4. Turn the ignition off and then start the engine to verify the indicator has been reset.
or
2. Use the rocker switch on the windshield wiper lever to select “Settings” and confirm with button underneath windshield wiper lever then follow steps 4-5.
or
3. Use the buttons on the right hand side of the multi function steering wheel
4. Select the “Settings” menu followed by the “Service” submenu. Select “Reset” and confirm.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.
*vehicles equipped with a navigation system can also access the reset menu from the SETTINGS button.

Reset the oil service light indicator for a Volkswagen Eos 2013

How do you reset service light indicator Volkswagen EOS year 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013

1. Turn the ignition off.
2. Press and hold the 0,0 button (located to the right of the instrument cluster).
3. Turn the igntion on (do not start the engine) and release the 0,0 button. Briefly press the double square button (located to the left of the instrument cluster).
4. Turn the ignition off and then start the engine to verify the indicator has been reset.
or
2. Use the rocker switch on the windshield wiper lever to select “Settings” and confirm with button underneath windshield wiper lever then follow steps 4-5.
or
3. Use the buttons on the right hand side of the multi function steering wheel
4. Select the “Settings” menu followed by the “Service” submenu. Select “Reset” and confirm.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.
*vehicles equipped with a navigation system can also access the reset menu from the SETTINGS button.