Tag Archives: maintenance

Reset oil service light Ford E 350 Series

Leave a reply

Reset oil service light Ford E 350 Series. From years: 2009, 2010, 2011, 2012.

How to reset oil service light Ford E 350 Series.

Oil Life Reset and Start Value. An oil change is required whenever indicated by the message center and according to the recommended maintenance schedule.

To reset the oil monitoring system to 100% after each oil change Ford E 350 Series. From years: 2009, 2010, 2011, 2012 (approximately 7,500 miles [12,000 km] or six months) perform the following.

  1. Switch the ignition ON, do not start the engine.
  2. Press and release the SELECT/RESET stem to display “OIL LIFE = XXX% HOLD RESET = NEW”.
  3. Press and hold the SELECT/RESET stem for two seconds and release. Oil life is set to XX% and “OIL LIFE SET TO XXX%” is displayed.
  4. To change oil life 100% miles value from 7,500 miles (12,000 km) or six months to another value, proceed to Step 5.
  5. Once “OIL LIFE SET TO XXX%” is displayed, release and press the RESET control switch to change the Oil Life Start Value. Each release and press will reduce the value by 10%.

Note: Oil Life Start Value of 100% equals 7,500 miles (12,000 km) or six months. For example, setting Oil Life Start Value to 60% sets the Oil Life Start Value to 3,000 miles (4,800 km) and 120 days.

OIL LIFE CHANGE SOON. Displayed when the engine oil life remaining is 5% or less. When oil life left is between 5% and 0%, the ENGINE OIL CHANGE SOON message will be displayed.

OIL CHANGE REQUIRED. Displayed when the oil life left reaches 0%, the OIL CHANGE REQUIRED message will be displayed. OIL LIFE OK displays after you have changed the oil.

RESET MAINTENANCE LIGHT ON DODGE SPRINTER

Leave a reply

Reset maintenance light on Dodge Sprinter

1. Put the key in the ignition and switch it on without starting the engine.
(Wait for LCD to return to the vehicle mileage)
2. Hold the “O” button down till you hear a beep (could take a while, 30 sec.)
3. Press the M button repeatedly and a number of reset menus will appear, (If you have used oil according to quality sheet 229.31 or 228/229.51 you can scroll to Reset.31 or Reset.51 respectively.) Select “reset 51″
4. Now, when appropriate oil type is selected press “O” for 6 seconds until ”2” is displayed.
5. Press “O” once again briefly and the ” reset done” message will confirm that the job is done.
6. Pull the Key out
FOR THE 2004 DODGE SPRINTER!

Turn the key to position 2 in the ignition lock and immediately press the button MI (km) twice.
Within 10 seconds, return the key to the 0 in the ignition lock.
Press and hold the button MI (km). Turn the key to position 2 in the ignition lock. Keep the button MI (km) pressed.
The maintenance indicator with the time/distance is shown.
After about 10 seconds, an acoustic signal will sound and the maintenance indicator is displayed with the new remaining time / distance .
Release the button MI (km)

Reset service light, maintance on Toyota Rav 4

Leave a reply

This Maintenance light is a reminder : “TIME FOR AN OIL CHANGE!”

1. Turn the ignition key to the ‘OFF’ position with the trip meter A reading shown.

2. Turn the ignition key to the ‘ON’ position while holding down the trip meter ‘RESET’ button.

3. Hold down the knob for at least 5 seconds. The odometer indicates ‘000000’ and the light goes off.

Reset maintenance light on dodge sprinter

Leave a reply

Reset service light indicator, engine oil life dodge sprinter, oil reset instructions:

1. Put the key in the ignition and switch it on without starting the engine.
(Wait for LCD to return to the vehicle mileage)
2. Hold the “O” button down till you hear a beep (could take a while, 30 sec.)
3. Press the M button repeatedly and a number of reset menus will appear, (If you have used oil according to quality sheet 229.31 or 228/229.51 you can scroll to Reset.31 or Reset.51 respectively.) Select “reset 51”
4. Now, when appropriate oil type is selected press “O” for 6 seconds until ”2” is displayed.
5. Press “O” once again briefly and the ” reset done” message will confirm that the job is done.
6. Pull the Key out
FOR THE 2004 DODGE SPRINTER!

Turn the key to position 2 in the ignition lock and immediately press the button MI (km) twice.
Within 10 seconds, return the key to the 0 in the ignition lock.
Press and hold the button MI (km). Turn the key to position 2 in the ignition lock. Keep the button MI (km) pressed.
The maintenance indicator with the time/distance is shown.
After about 10 seconds, an acoustic signal will sound and the maintenance indicator is displayed with the new remaining time / distance .
Release the button MI (km)

Reset the Service Lights on a BMW 1-Series

Leave a reply

Reset service light indicator, engine oil life BMW 1-Series reset instructions:

Many models in the BMW 1-series are equipped with a maintenance system that monitors driving conditions to calculate when regular maintenance should be completed. When the computer determines it is time for regular service, a reminder light is illuminated on the control panel. After the scheduled service is performed, the service lights should be reset in order for the computer to accurately track when the next service will be due.

Instructions

1. Insert the key into the ignition.

2. Press the “Start/Stop” button. Wait for the service reminder lights to turn on and off.

3. Press and hold the trip odometer “Reset” button.

4. Release the “Reset” button when the service menu appears.

5. Press the “Menu” button on the end of the turn signal arm to move through the menu until the service reset option is highlighted.

6. Press and hold the “Reset” button until the service light resets.