Tag Archives: return

Reset rear light failure Saab 9-3

How to reset rear light failure Saab 9-3 first generation.

Reset rear light failure Saab 9-3 first generation. From year: 1998, 1999, 2000, 2001, 2002.

  1. Enter the key in the ignition and turn it until the lights on the dashboard go on, one position befor you start the car.
  2. The rear light failure indicator light cannot be removed by pressing CLEAR button.
  3. To reset the light push the brake pedal to clear.

CHECK messages on a Saab 9-3 first generation. When the engine is started, CHECKING will appear on the display for about 4 seconds, while the SID checks are being performed. When a CHECK indicator is generated while the vehicle is being driven, a chime will sound, INFO DISPL will illuminate on the main instrument panel, and the message will appear on the SID. The number of messages that can be displayed by the SID varies with the specification of the car. If more than one CHECK indicator has been generated, the + symbol will appear to the left of the text on the display. The indicator appear in order of priority. If a new fault occurs while another message is being displayed, the message relating to the new one will appear for 10 seconds, after which the display will return to the earlier one. Press CLR once to acknowledge a message, hereupon it will be cleared from the display. It will not be displayed again before the ignition has been switched off and then on again.

Reset fog light failure Saab 9-3

How to reset fog light failure Saab 9-3 first generation.

Reset fog light failure Saab 9-3 first generation. From year: 1998, 1999, 2000, 2001, 2002.

  1. Turn ignition to ON position, do not start the engine.
  2. The fog light warning light message cannot be removed by pressing CLEAR button.
  3. To reset the fog light press the brake pedal to clear.

All information how to reset test brake message on a Saab 9-3 is taken from owners manual.
CHECK messages. When the engine is started, CHECKING will appear on the display for about four seconds, while the Saab Information Display (SID) checks are being performed. When a CHECK message is generated while the car is being driven, a chime will sound, INFO DISPL will illuminate on the main instrument panel, and the message will appear on the Saab Information Display (SID). The number of messages that can be displayed by the Saab Information Display (SID) varies with the specification of the car. If more than one CHECK message has been generated, the + symbol will appear to the left of the text on the display. The messages appear in order of priority. If a new fault occurs while another message is being displayed, the message relating to the new one will appear for 10 seconds, after which the display will return to the earlier one. Press CLR once to acknowledge a message, hereupon it will be cleared from the display. It will not be displayed again before the ignition has been switched off and then on again.

RESET MAINTENANCE LIGHT ON DODGE SPRINTER

Reset maintenance light on Dodge Sprinter

1. Put the key in the ignition and switch it on without starting the engine.
(Wait for LCD to return to the vehicle mileage)
2. Hold the “O” button down till you hear a beep (could take a while, 30 sec.)
3. Press the M button repeatedly and a number of reset menus will appear, (If you have used oil according to quality sheet 229.31 or 228/229.51 you can scroll to Reset.31 or Reset.51 respectively.) Select “reset 51″
4. Now, when appropriate oil type is selected press “O” for 6 seconds until ”2” is displayed.
5. Press “O” once again briefly and the ” reset done” message will confirm that the job is done.
6. Pull the Key out
FOR THE 2004 DODGE SPRINTER!

Turn the key to position 2 in the ignition lock and immediately press the button MI (km) twice.
Within 10 seconds, return the key to the 0 in the ignition lock.
Press and hold the button MI (km). Turn the key to position 2 in the ignition lock. Keep the button MI (km) pressed.
The maintenance indicator with the time/distance is shown.
After about 10 seconds, an acoustic signal will sound and the maintenance indicator is displayed with the new remaining time / distance .
Release the button MI (km)

Reset maintenance light on dodge sprinter

Reset service light indicator, engine oil life dodge sprinter, oil reset instructions:

1. Put the key in the ignition and switch it on without starting the engine.
(Wait for LCD to return to the vehicle mileage)
2. Hold the “O” button down till you hear a beep (could take a while, 30 sec.)
3. Press the M button repeatedly and a number of reset menus will appear, (If you have used oil according to quality sheet 229.31 or 228/229.51 you can scroll to Reset.31 or Reset.51 respectively.) Select “reset 51”
4. Now, when appropriate oil type is selected press “O” for 6 seconds until ”2” is displayed.
5. Press “O” once again briefly and the ” reset done” message will confirm that the job is done.
6. Pull the Key out
FOR THE 2004 DODGE SPRINTER!

Turn the key to position 2 in the ignition lock and immediately press the button MI (km) twice.
Within 10 seconds, return the key to the 0 in the ignition lock.
Press and hold the button MI (km). Turn the key to position 2 in the ignition lock. Keep the button MI (km) pressed.
The maintenance indicator with the time/distance is shown.
After about 10 seconds, an acoustic signal will sound and the maintenance indicator is displayed with the new remaining time / distance .
Release the button MI (km)

Oil service reset Chrysler Dodge Trucks Sprinter

Reset service light indicator, engine oil life Chrysler Dodge Trucks Sprinter, year 2004-2005 reset instructions:

Turn the key to position 2 in the ignition lock and immediately press the MI (MILES)button twice.
Within 10 seconds, return the key to position 0 in the ignition lock.
Press and hold the button (MI). Turn the key to position 2 in the ignition lock. Keep the button (MI) pressed.
The maintenance indicator with the current remaining time/distance is shown. After about 10 seconds, an acoustic signal will sound and the maintenance indicator is displayed with the new remaining time/distance. Release the button MI(KM).
Turn the ignition off and then start the engine to verify the indicator has been reset.