Tag Archives: reset instructions

Reset maintenance light on dodge sprinter

Leave a reply

Reset service light indicator, engine oil life dodge sprinter, oil reset instructions:

1. Put the key in the ignition and switch it on without starting the engine.
(Wait for LCD to return to the vehicle mileage)
2. Hold the “O” button down till you hear a beep (could take a while, 30 sec.)
3. Press the M button repeatedly and a number of reset menus will appear, (If you have used oil according to quality sheet 229.31 or 228/229.51 you can scroll to Reset.31 or Reset.51 respectively.) Select “reset 51”
4. Now, when appropriate oil type is selected press “O” for 6 seconds until ”2” is displayed.
5. Press “O” once again briefly and the ” reset done” message will confirm that the job is done.
6. Pull the Key out
FOR THE 2004 DODGE SPRINTER!

Turn the key to position 2 in the ignition lock and immediately press the button MI (km) twice.
Within 10 seconds, return the key to the 0 in the ignition lock.
Press and hold the button MI (km). Turn the key to position 2 in the ignition lock. Keep the button MI (km) pressed.
The maintenance indicator with the time/distance is shown.
After about 10 seconds, an acoustic signal will sound and the maintenance indicator is displayed with the new remaining time / distance .
Release the button MI (km)

Reset the Service B in a Mercedes C230

Leave a reply

Reset service light indicator, engine oil life Service B in a Mercedes C230, oil reset instructions:

When a service is needed based on the car’s mileage or time since the last service, the display screen on a Mercedes C230 will notify you. The display screen is located within the speedometer on the instrument panel. Mercedes mechanics will reset the Service B notification light after the service is performed. If you performed the service, you need to reset the light yourself. Service B includes an oil and filter change, a tire rotation and other maintenance checks.

Instructions

1. Insert the key into the ignition and turn it until the battery comes or the engine turns on.

2. Locate the left and right arrow buttons on the left side of your steering wheel. Press either button until the mileage is displayed on the instrument panel display screen.

3. Press the up or down button until the service symbol appears on the screen.

4. Locate the trip odometer reset button to the left of the instrument panel. Hold the reset button for a few seconds until the screen displays the message, “Do you want to reset the service interval? Confirm with the R-button.” Release the button once the phrase appears.

5. Press the reset button to reset the Service B notification.

Reset the Mercedes-Benz SLK 230 for an Oil Change

Leave a reply

Reset service light indicator, engine oil life Mercedes-Benz SLK 230, oil reset instructions:

The Mercedes-Benz SLK 230 features an engine oil-life tracking system as part of the car’s computer. The computer monitors driving habits and engine conditions to determine when the oil needs to be changed. The control panel displays a reminder when the car needs an oil change. In order for the computer system to work correctly to predict the next oil change, reset the light following an oil service.

1. Insert the key in the ignition. Turn the key to position “2.”

2. Press the adjust button twice within one second. The adjust button is located below the speedometer.

3. Turn the ignition off.

4. Press and hold the adjust button. Turn the ignition to position “2.”

5.Release the adjust button after a signal sounds and the service indicator resets visibly.

Service light reset indicator for BMW 525i

Leave a reply

Reset service light indicator, engine oil life BMW 525i reset instructions:

The good news is you can do it yourself as i explained to the car owner.

Here is how:

With the ignition off.

Press and Hold the trip meter button,

keep held in and turn ignition to position 1 this is the first click the one before the ignition lights come on

Keep the button pressed in for about 5 seconds until you see “Oil Service” or “Inspection” with “Reset” or “Re” in the display.

(On vehicles with “High” cluster, you will also see the amount of fuel in litres remaining until next service).

Quikly release and Press the button again now hold for a further 5 seconds or until “Reset” or “Re” flashes.

While this display is flashing,quickly release and press the button again to reset the Service Interval.

After the display has shown the new service interval you should see END SIA” for about 2 secs.

Please note this procedure should only be used after you car has been serviced and i would qeustion any company who is unable to reset the

service/oil light either using diagnostic equipment or using this method after they have have serviced a vehicle.

Reset oil maintenance light on 2007 ford explorer

Leave a reply

Reset service light indicator, engine oil life Ford explorer, year 2007 reset instructions:

The directions that come with your vehicle are lousy, and the process stinks to. And keep in mind that if you do not press the buttons fast enough, or hold long enough, you must start over. It usually takes a few tries. Here’s how to do it:

1.) Press the TRIP/RESET button to cycle to “SETUP MENU HOLD RESET”.
2.) Now press and hold the button for 2 seconds until “RESET FOR SYSTEM CHECK” is displayed, then release.
3.) Imediately press and hold button for 2 more seconds until “Oil 100% RESET IF NEW” is displayed, then release.
4.) Imediately press button once to display “HOLD RESET IF NEW OIL” and release.
5.) Imediately press and hold button for 2 seconds until “OIL LIFE SET TO 100%” is displayed.

If you have done this dance properly, without delaying too long between steps, you are done. What a pain in the butt just to reset the oil maintenance light!!!