Tag Archives: oil light

Reset oil service light Saab 9-7X

How to reset oil service light Saab 9-7X.

Reset oil service light Saab 9-7X. From year: 2005, 2006, 2007, 2008, 2009.

 

The Engine Oil Life System calculates when to change your engine oil and filter based on vehicle use. Anytime your oil is changed, reset the system so it can calculate when the next oil change is required. If a situation occurs where you change your oil prior to a change engine oil light being turned on, reset the system. To reset the Engine Oil Life System, do the following:

  1. Turn the ignition to run, one position before starting the car.
  2. Use the fuel button on the Driver Information Center (DIC) to reach the ENGINE OIL LIFE screen.
  3. Press and hold the select button on the Driver Information Center (DIC) five seconds while ENGINE OIL LIFE is displayed.
  4. OIL LIFE RESET will appear on the Driver Information Center (DIC) display for 10 seconds to let you know the system is reset.
  5. If the change engine oil light comes back on when you start your vehicle, the engine oil life system has not reset. Repeat the procedure.
  6. Turn the ignition to off position and then start the car to see if the engine oil life indicator has been reset.
  7. All information how to reset engine oil life system on a Saab 9-7x is taken from Saab owners manual.

Oil reset service light indicator Dacia Logan MCV DCI.

How do you reset maintenance light, reset service light indicator Dacia Logan MCV DCI. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Dacia Logan MCV DCI, oil reset instructions:

Dacia-Logan-MCV-1.5-dCi

How reset oil light service Dacia Logan MCV DCI

1. Switch ignition ON.
2. Press and hold the throttle pedal
3. Press the brake pedal 3 times

Perform all operations in less than 10 seconds

Oil change warning light should turn off.

How reset oil light GMC Yukon

How do you reset maintenance light, reset service light indicator GMC Yukon. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life GMC Yukon, oil reset instructions:

year 2000-2006

1. Turn the ignition to run (one position before starting engine).
2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
3. If the Change Oil Soon light flashes the system is resetting.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.

year 2007-2013

1. Turn the ignition to run (one position before starting engine).
2. *Display the OIL LIFE REMAINING on the DIC (i button). If the vehicle does not have DIC buttons, the vehicle must be in P (Park) to access this display by pressing the trip odometer reset stem.
3. Press and hold the SET/RESET (check mark) button on the DIC , or the trip odometer reset stem if vehicle does not have DIC buttons for more than 5 seconds. The oil life will change to 100%.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.
*Remaining oil life can also be reset by depressing the gas pedal 3 times within 5 seconds instead of using the DIC.

Reset the Oil Life on My Suzuki XL7

How do you reset maintenance light, reset service light indicator Suzuki XL7. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Suzuki XL7, oil reset instructions:

Instructions

1.Sit in the driver’s seat of the XL7. Insert the ignition key and turn it to “RUN.” Do not start the engine.

2.Press and release the gas pedal three times within five seconds. Watch for the engine oil light to flash, indicating that the system is reset.

3.Turn the key to “OFF” and remove it from the ignition.

Turn Off an Oil Light on a 2005 KIA Spectra

Instructions

1. Pull the vehicle over to a safe area, if the light comes on while driving. If you are very close to a store that sells motor oil, stop there. Do not continue driving with the indicator light lit, as severe engine damage may occur.

2. Turn off the vehicle’s engine and open the hood. Locate the oil filler cap and oil dipstick on the top-front of the engine.

3. Check the engine oil level on the oil dipstick. If the engine oil is low, remove the oil cap and add oil until the oil level on the oil dipstick reaches the “Full” mark.

4. Replace the oil cap and restart the Kia. The oil light should turn off within a few seconds of starting the vehicle.