Tag Archives: Manual Reset

Reset the Maintenance Light on Dacia Sandero

Leave a reply

How to Reset the Maintenance Light on Dacia Sandero: A Detailed Guide

Owning a Dacia Sandero comes with the responsibility of ensuring it runs optimally. An essential aspect of this is recognizing and addressing the maintenance reminders. This guide provides instructions on resetting the maintenance light for Dacia Sandero, a crucial step after servicing your vehicle.

How to Reset the Maintenance Light on Dacia Sandero: A Detailed Guide

Step-by-Step Instructions to Reset Maintenance Light for Dacia Sandero

Turn the ignition to the “ON” position.
Firmly press and hold the throttle pedal.
Tap the brake pedal three times consecutively.
Execute all these steps within 10 seconds for them to be effective.
Should the oil change warning light remain on, simply repeat the procedure.

Maintenance Tips for Dacia Sandero Owners

  • Always utilize the recommended engine oil for your Dacia Sandero. Refer to your owner’s manual for specifics on oil type and grade.
  • Consistently monitor your tire pressure, ensuring they’re within the manufacturer’s recommended range.
  • Regularly check the brake pads. If worn out, replace them promptly for both safety and performance.

Conclusion

By following the steps above, you can confidently reset the maintenance light on your Dacia Sandero. Regular maintenance ensures your vehicle performs at its best. Always consult your owner’s manual or a Dacia specialist for any clarifications or specialized guidance.

Oil reset service light indicator Dacia Logan MCV DCI.

Leave a reply

Guide: How to Reset the Maintenance Light on Dacia Logan MCV DCI

Whether you own an older or a newer model of the Dacia Logan MCV DCI, it’s crucial to understand how to reset the maintenance light. This indicator reminds you when it’s time for service, ensuring your car remains in optimal condition. In this guide, we’ll demonstrate the manual reset process using the buttons on your dashboard.

Dacia Logan MCV DCI - Reset Maintenance Light

Steps to Reset the Oil Service Light on Dacia Logan MCV DCI

Follow these straightforward steps for both older and newer models of the Dacia Logan MCV DCI:

  1. Turn the ignition to the “ON” position.
  2. Firmly press and hold the throttle pedal.
  3. Quickly press the brake pedal three times.

Ensure you complete all steps within 10 seconds for the reset to be successful.

Upon following these steps, the oil change warning light should switch off. If it doesn’t, try the process once more to ensure you’ve followed the sequence correctly.

Additional Tips for Dacia Logan MCV DCI Owners

  • Always refer to your owner’s manual for any specific instructions related to your model year.
  • Consider setting a regular maintenance schedule even if the light hasn’t turned on to keep your vehicle in top shape.
  • If unsure about any procedures, don’t hesitate to consult with a Dacia service specialist.

Conclusion

Knowing how to reset the maintenance light on your Dacia Logan MCV DCI ensures you’re proactive about your vehicle’s health. Always prioritize regular servicing to maintain your car’s efficiency and longevity.

Oil service reset Mercedes Benz SLK – Class

Leave a reply

Reset service light indicator, engine oil life Mercedes Benz SLK – Class, year: 1998-1999, oil reset instructions:

Manual Reset:

1. Turn key in steering lock to position 2.
2. Within 4 seconds press button (1) left of speedometer twice.
3. The present status for days or distance displays
4. Press and hold button (1)
5. Continue to hold button (1) for approximately 10 seconds until a signal sounds and the display shows 10 000 mils or 15 000km. Release button (1).
6. Turn the ignition off and then start the engine to verify the indicator has been reset.
2000-2001
*Diagnostic Reset Tool Required

Manual Reset:

1. Switch ignition on and immediately press knob to left of speedometer twice within 4 seconds.
2. Present status for days or distance is now displayed. Within 10 seconds
3. Press and hold button to the left of speedometer
4. Release button.
5. Service interval displays the reset interval.
6. Turn the ignition off and then start the engine to verify the indicator has been reset.

2002-2004
1. Switch ignition on and immediately press knob to left of speedometer twice within 1 second.
2. Present status for days or distance is now displayed. Within 10 seconds
3. Press and hold button to the left of speedometer
4. Release button.
5. Service interval displays the reset interval.
6. Turn the ignition off and then start the engine to verify the indicator has been reset.

2005-2009
1. Turn the ignition to position 1.
2. Press the system selection button (3 located on the lower left of the steering wheel) repeatedly until the kilometer reading is shown in the multi information display.)
3. Press the cluster illumination button (lower left of instrument panel) quickly 3 times. The battery voltage will be displayed.
4. Press the up or down buttons until the service menu appears.
5. Use the +/- buttons to select menu oprion “”CONFIRM””.”
6. Press the system selection button uuntil “”COMPLETE SERVICE”” is selected.”
7. Confirm “”Complete Service”” with system selection button. The display will show “”SERVICE CONFIRMED””.”
8. Turn the ignition off and then start the engine to verify the indicator has been reset.

2010-2012
1. Turn the ignition to position 1. (close all doors
2. Press the scroll forward button (bottom button on left side of steering wheel controls) to display mileage counter.
3. Press the system selection button (left button on left side of steering wheel controls) repeatedly until the menu item “”trip”” with highlighter is displayed. “”Trip”” remains selected for 5 seconds so move quickly to step 4.”
4. Press and hold accept/end phone button and within 1 second press and hold the button in the center of the arrows (left side of steering wheel). In 5 seconds the Workshop menu will be displayed “”Vehicle data
5. Use scroll forward or backward to highlight “”ASSYST PLUS”” and confirm selection using the button in the center of the arrows. “”Service data”” and “”Full service”” appear in the display.”
6. Use scroll forward or backward to select “”Full service”” and confirm selection with the button in the center of the arrows. The display will show “”Service 1
7. Use scroll forward or backward to select “”Confirm serv”” and confirm selection with the button in the center of the arrows.”
8. Use scroll forward or backward to select engine oil specification used. “”Oil qual. 229.3″” and “”Oil qual. 229.5″” are displayed. Confirm selection with center button. The display shows “”Serv conducted?”””
9. Use scroll forward or backward to select “”Yes”” and confirm with center button. Display will show “”Take-back not possible
10. Use scroll forward or backward until “”Configuration”” is highlighted and confirm selection with button in center of the arrows. “”Full service carried out”” appears in the display.”
11. Use scroll forward and backward to exit menu.
12. Turn the ignition off and then start the engine to verify the indicator has been reset.

Oil Service Light Reset Audi TT

Leave a reply

Reset service light indicator, engine oil life Audi TT, year 2000-2004 oil reset instructions:

2000-2004
*Diagnostic Reset Tool Required

Manual Reset using DIS and Reset Knobs:

1. Turn off the ignition
2. Locate the Driver Information System (DIS) in the instrument panel.
3. Do the following to display the SERVICE! message in the display.
i) Press and hold the right RESET knob.
ii) Turn on the ignition – do not start the engine.
iii) Release the knob.
4. Do the following to display the next service interval (SERVICE IN ##MI)
i) Press and hold the right RESET knob.
ii) Release the knob.
5. Turn off the ignition.
6. Start the engine and verify indicator has been reset.

Manual Reset for 2000 only:

1. Turn off the ignition.
2. Press and hold the TRIP RECORDER reset button on the instrument cluster and turn on the ignition.
3. Release the button. The display will show SERVICE IN —MI or SERVICE.
4. Within 5 seconds
5. Turn off the ignition.
6. Start the engine and verify indicator has been reset.
2005-2007
1. Turn off the ignition.
2. Press and hold the button to the right of the LCD display in the instrument cluster.
3.Turn the ignition on (do not start the engine); the message “”SERVICE”” appears. Release button.”
4. Within 5 seconds
5. Turn off the ignition.
6. Start the engine and verify indicator has been reset.

2008-2012
“Audi recommends the use of a reset tool. *Depening on model

Oil Service Reset Audi Allroad

Leave a reply

Reset service light indicator, engine oil life Audi Allroad, year 2001-2005 oil reset instructions:

Manual Reset using DIS and Reset Knobs:

1. Turn off the ignition
2. Locate the Driver Information System (DIS) in the instrument panel.
3. Locate the reset buttons (WRENCH button and 0
4. Do the following to display the SERVICE! Message in the DIS:
i) Press and hold the Wrench button.
ii) Turn on the ignition – do not start the engine.
iii) Release the WRENCH button.
5. Do the following to display the next service interval (SERVICE in ##MI)
i) Press and hold the 0
ii) Release the 0
6. Turn off the ignition.
7. Start the engine and verify indicator has been reset.

Manual Reset using DIS and Reset Knobs:

1. Turn off the ignition
2. Locate the Driver Information System (DIS) in the instrument panel.
3. Do the following to display the SERVICE! message in the display.
i) Press and hold the right RESET knob.
ii) Turn on the ignition – do not start the engine.
iii) Release the knob.
4. Do the following to display the next service interval (SERVICE IN ##MI)
i) Press and hold the right RESET knob.
ii) Release the knob.
5. Turn off the ignition.
6. Start the engine and verify indicator has been reset.