Tag Archives: reminder

Reset service light oil life indicator dashboard Acura Integra

Leave a reply

Reset service light indicator, engine oil life, dashboard oil life indicator Acura Integra, year: 1986-1990, instructions for manually resetting the trip computer:

Reset the indicator by inserting the key in the slot below the indicator.
or
Turn ignition to position 2 (do not start the engine).
Press and hold the RESET button on the bottom of the dash for more than 3 seconds until the reminder light turns off.
Turn the ignition off and then start the engine to verify the indicator has been reset.

1991-1993

Reset the coloured indicator by inserting the key in the slot below the indicator.

1994-1995

Turn ignition to position 2 (do not start the engine).
Press and hold the RESET button located at the bottom of the dash for more than 3 seconds until the reminder light turns off.
Turn the ignition off and then start the engine to verify the indicator has been reset.

1996-2001

Turn ignition to position 2 (do not start the engine).
Press the RESET button located below and to the right of the steering column (feel for a soft spot) until light goes out.
Turn the ignition off and then start the engine to verify the indicator has been reset.

How reset the service reminder indicator light Range Rover sport?

Leave a reply

Reset service light indicator, engine oil life Range Rover sport, year 2007 reset instructions:
turn off the car’s ignition.

Hold down the reset button on the dash board to zero the mileage.

keep it held in.

turn the car’s ignition on – but do not start.

keep the button in for 5 seconds.

a menu will come up – like date/mileage.

let go and then press the button again.

it will toggle through some options – then get to ‘rst’

press the button again, and your done

Reset oil service golf 5

Leave a reply

The Service Reminder Indicator (SRI) is fitted to all 2000 EuroVans It stores two sets of information: Oil Change and Inspection Service. Here is the method to manually reset the SRI after performing a service:

Switch ignition OFF.
Press and hold down the trip odometer reset button (at the lower right of the instrument cluster).
Switch ignition ON and release the trip odometer reset button. It is not necessary to start the engine; merely turn the key until the ignition is ON.
The trip mileage area now displays “Service OIL”.
If trip odometer reset button is now pressed again, the display turns to “Service INSP”. Pressing the button again will cycle the display back to “Service OIL”.
When the reminder that needs to be reset (either OIL or INSP) is displayed, turn button for setting the clock (at lower left of instrument cluster) to the right. The display changes to “Service —-“. That reminder is now reset.
The second reminder is unaffected unless it is displayed by pressing trip odometer reset button and the clock button is turned right again.
Switch ignition OFF and back ON to resume normal display.

Service light reset indicator Ford focus 1.6 tdci 09

Leave a reply

Reset service light indicator, engine oil life Ford focus, year 2009 reset instructions:

This is how you do it on a MK4 Mondeo, worth a go:-

1. Close all doors.
2. Turn the ignition key to position II.
3. Simultaneously press the accelerator pedal and the brake pedal and hold for a minimum of 15 seconds.
4. The oil change reminder indicator will turn off. This confirms that the reset procedure has been correctly completed.

How to Turn Off the Service Light on a CLK 320

Leave a reply

Reset service light indicator, engine oil life Mercedes Benz CLK 320, oil reset instructions:

Most models of the Mercedes-Benz CLK 320 are equipped with a service reminder system that displays a notification light on the control panel when service is due. The onboard computer tracks driving conditions to determine when to illuminate the service reminder light. The service technician at the Mercedes-Benz dealer or garage will reset the service light for you when he performs regular maintenance on the car. If you do your own maintenance, you can turn the light off yourself.

1. Turn the ignition switch on. Do not start the engine.

2. Press the information menu button on the left of the steering wheel repeatedly until the total mileage is displayed.

3. Press the up- or down-arrow button on the left of the steering wheel until the service light is displayed.

4. Press and hold the reset button until a confirmation message appears on the display. The reset button is located to the left of the odometer.

5. Press and release the reset button to confirm the reset. The service light turns off.