Tag Archives: oil indicator

Oil service reset Volkswagen Jetta

Reset service light indicator, engine oil life Volkswagen Jetta, year 1993-2010 reset instructions:

Turn the ignition to run (one position before starting engine).
Press and hold the button located under the speedometer.
Switch ignition off and release button. Message OIL appears in the display.
Press MINUTE button of digital clock or button for setting analog clock only as long as 5 dashes appears in display.
Turn the ignition off and then start the engine to verify the indicator has been reset.

2000-2004

Reset may be similar to previous year or other models – Oil Reset will verify and update site.

2005-2010

Manual Reset:
Turn the ignition to run (one position before starting engine).
Press and HOLD the trip-odometer button “0.0”.
Turn your key to run (one position before starting engine).
Release the trip-odometer button.
Push and release the Clock Minute Set Button “min”.
Turn the ignition off and then start the engine to verify the indicator has been reset.

Oil service reset Volkswagen Cabrio

Reset service light indicator, engine oil life Volkswagen Cabrio, year 1995-2002 reset instructions:

Turn the ignition to run (one position before starting engine).
Press and hold the button located under the speedometer.
Switch ignition off and release button. Message OIL appears in the display.
Press MINUTE button of digital clock or button for setting analog clock only as long as 5 dashes appears in display.
Turn the ignition off and then start the engine to verify the indicator has been reset.

Oil service reset Saturn Vue

2004-2009

Turn the ignition to run (one position before starting engine).
Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds. If the Change Engine Oil light is flashing, the system is reset. The light will flash for up to 30 seconds or until the ignition is turned off. If the light comes on again and stays on for 30 seconds at the next engine start, it did not reset. You will need to reset the system again.
Turn the ignition off and then start the engine to verify the indicator has been reset.

Oil service reset Saturn Sky

2007-2009

Turn the ignition to run (one position before starting engine).
Press the information and reset buttons on the DIC at the same time to enter the personalization menu.
Press the information button to scroll through the available personalization menu modes until the DIC display shows OIL-LIFE RESET.
Press and hold the reset button until the DIC display shows ACKNOWLEDGED. This will tell you the system has been reset.
Turn the ignition off and then start the engine to verify the indicator has been reset.

Oil service reset Saturn Relay

2005-2007

Turn the ignition to run (one position before starting engine).
Push the set/reset button until OIL is displayed on the DIC.
Once OIL is displayed, push and hold the set/reset button for 5 seconds. The number will disappear and be replaced by 100 (indicating 100% oil life remaining).
Turn the ignition off and then start the engine to verify the indicator has been reset.