Tag Archives: push

Service oil reset Nissan Murano

Leave a reply

2006-2008
Turn the ignition to run (one position before starting engine).
Maintenance and tire pressure information will be displayed when the “MAINT” button is pushed on the centre console.
To display the setting of the maintenance interval, select the “Engine Oil” key using the joystick and push the “ENTER” button.
To reset the maintenance interval, select the “Reset” key using the joystick and push the “ENTER” button.
Turn the ignition off and then start the engine to verify the indicator has been reset.

2009-2010
Turn the ignition to run (push START/STOP button once).
Switches for the trip computer are located on the right side of the combination meter panel. When the ignition switch is pushed to the ON position press the (square) button to bring up “Setting” and and press (circle) button to select.
Use the (circle) button to scroll to MAINTENANCE and use the (square) button to select.
Select ENGINE OIL to set or reset the distance for changing the oil.
Repeat step 2 to set or reset the distance for the OIL FILTER.
Turn the ignition off and then start the engine to verify the indicator has been reset.

Service oil reset Nissan Altima 2007-2015

Leave a reply

How do you reset maintenance light, reset service light indicator Nissan Altima, year 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015. For reset maintenance light and that can be made manually by use button on car dashboard.

Reset service light indicator, engine oil life Nissan Altima 2007-2012, oil reset instructions:

  1. Turn the ignition to run (one position before starting engine/push START/STOP button once).
  2. Press the (square) button, located on the instrument panel just behind the steering wheel to the left, to display the SETTINGS mode.
  3. In the setting mode screen press (circle) button to move to MAINTENANCE.
  4. Set a desired interval by pushing (circle) button to highlight ENGINE OIL and pressing (square) button. The reset mode will open up and allow you to enter the desired distance.
  5. Select RESET and select new time or distance.
  6. Repeat step 3 for ENGINE OIL FILTER. Turn the ignition off and then start the engine to verify the indicator has been reset.

Reset service light indicator, engine oil life Nissan Altima 2014, 2015, oil reset instructions:

  1. Turn the ignition to run (one position before starting engine/push START/STOP button once).
  2. Press the square button (□) , located on the instrument panel just behind the steering wheel to the left, to display the SETTINGS mode.
  3. Use the up/down arrow buttons to highlight SETTINGS and confirm with the ENTER button.
  4. From the SETTINGS menu select MAINTENANCE and confirm with the ENTER button.
  5. Select the maintenance item to be reset; reset distance and confirm with the ENTER button.
  6. Repeat for any other MAINTENANCE items.
  7. Turn the ignition off and then start the engine to verify the indicator has been reset.

Service oil light indicator reset Infiniti QX56

Leave a reply

Reset service light indicator, engine oil life Infiniti QX56, year: 2004-2010, oil reset instructions:

2004-2007
Turn the ignition to run (one position before starting engine).
Push the ěTRIPî button repeatedly to display “MAINTENANCE” and press the “ENTER” button.
Select “Engine Oil” and press the “ENTER” button.
Select “RESET” and press “ENTER” button.
Press “PREV” to return to previous menu.
Turn the ignition off and then start the engine to verify the indicator has been reset.

2008-2010
Turn the ignition on without starting the engine (press START/STOP) button.
Push the ěINFOî button on the control panel for the Vehicle Information screen.
Use arrow keys to scroll down to “Maintenance” and press “ENTER” button to select.
Select “Reminder 1” and press “ENTER” button.
Select “Reset Distance” and press “ENTER” button.
Press “Back” button to return to “Maintenance” menu and repeat procedure for “Reminder 2″… Turn the ignition off and then start the engine to verify the indicator has been reset.

Service oil light indicator reset Infiniti M Series

Leave a reply

Reset service light indicator, engine oil life Infiniti M Series, year: 2003-2007, oil reset instructions:

2003-2004
Turn the ignition to run (one position before starting engine).
Push the “INFO” button on the control panel for the Vehicle Information screen.
Choose “Maintenance” using the joystick and push the “ENTER” button.
Select “Engine Oil” and press “ENTER” button.
Select “Reset” and press “ENTER” button.
Press “PREV” button to return to “Maintenance” menu and repeat procedure for “Oil Filter”. Turn the ignition off and then start the engine to verify the indicator has been reset.
2006-2007
Turn the ignition to run (one position before starting engine).
Push the “INFO” button on the control panel for the Vehicle Information screen.
Use arrow keys to scroll down to “Maintenance” and press “ENTER” button to select.
Select “Engine Oil” and press “ENTER” button.
Select “Reset Distance” and press “ENTER” button.
Press “BACK” button to return to “Maintenance” menu and repeat procedure for “Oil Filter”. Turn the ignition off and then start the engine to verify the indicator has been reset.
2008-2010
Turn the ignition on without starting the engine (press START/STOP) button.
Push the “INFO” button on the control panel for the Vehicle Information screen.
Use arrow keys to scroll down to “Maintenance” and press “ENTER” button to select.
Select “Reminder 1” and press “ENTER” button.
Select “Reset Distance” and press “ENTER” button.
Press “Back” button to return to “Maintenance” menu and repeat procedure for “Reminder 2″… Turn the ignition off and then start the engine to verify the indicator has been reset.

How to replace the rear brake pads on my passat 2007?

Leave a reply

solved the problem, i found a TSB explaing what to do when this happens, and than i found a realy good HOW TO.

Practicly you need to reset the hand brake cylinder by:

1. Disconect batery for 5 minutes (this means if your car is 2007> you will have to go to dealer so he can put the code for radio thru some GEKO system othervise you cant use the radio!)

2. Connect the batery.

3. Dont start the car only give contact (many lights go on )

4. pres and hold the brake while presing the hand brake 2 times on and 2 times off. (i waited 30 seconds betven “on” and “off” cause the manual i found wasnt very clear)

5. Than i pussehd the cylinder back with hands, (Be carful not to turn it!!!) only push it straight i did it by hand.

6. Put everything back, deleted the fault codes and started all over again like manual said on the previous post.

I did everything like it said but at the end i end up with P on the dash light up, than i only deleted the fault codes from controler 53 – Hand brake and it worked like a charm!