Tag Archives: knob

Oil Service Reset Audi Allroad

Reset service light indicator, engine oil life Audi Allroad, year 2001-2005 oil reset instructions:

Manual Reset using DIS and Reset Knobs:

1. Turn off the ignition
2. Locate the Driver Information System (DIS) in the instrument panel.
3. Locate the reset buttons (WRENCH button and 0
4. Do the following to display the SERVICE! Message in the DIS:
i) Press and hold the Wrench button.
ii) Turn on the ignition – do not start the engine.
iii) Release the WRENCH button.
5. Do the following to display the next service interval (SERVICE in ##MI)
i) Press and hold the 0
ii) Release the 0
6. Turn off the ignition.
7. Start the engine and verify indicator has been reset.

Manual Reset using DIS and Reset Knobs:

1. Turn off the ignition
2. Locate the Driver Information System (DIS) in the instrument panel.
3. Do the following to display the SERVICE! message in the display.
i) Press and hold the right RESET knob.
ii) Turn on the ignition – do not start the engine.
iii) Release the knob.
4. Do the following to display the next service interval (SERVICE IN ##MI)
i) Press and hold the right RESET knob.
ii) Release the knob.
5. Turn off the ignition.
6. Start the engine and verify indicator has been reset.

RESET SERVICE LIGHT SKODA OCTAVIA 2

Reset service light Skoda Octavia 2, 2004, 2005, 2006, 2007

1. Switch off the ignition and press the reset knob of the trip counter below the speedometer and hold.

2. Switch on the ignition and release the reset button, one of the service events appear in the display.

3. It is possible to switch between the the readouts of the service events by briefly pressing the reset button.

4. When the particular service event is displayed, turn the button for setting the digital clock to the right, service appears in the display.

5. Switch off the ignition. Only now is the service event reset.

Reset service light Toyota Yaris 2009 – 2010

1. Turn the ignition to run (one position before starting engine).

2. Ensure odometer reading is shown, turn ignition off.

3. While holding down the trip meter reset knob turn the ignition to run (one position before starting engine).

4. Hold down knob for at least 5 seconds. The odometer indicates “000000″ and the light goes off. If the system fails to reset, the light will continue flashing.

5. Turn the ignition off and then start the engine to verify the indicator has been reset.

Reset oil service light 2007 seat leon

1. Press and Hold the Odometer knob in
2. Turn the ignition on (do not start the car though)
3. Turn the odometer knob to the right and hold for about 5 secs.
4. Release odometer knob and switch ignition off.
5. Start car, Service indicator should now be gone.== Answer ==
cheers for the info worked first time probably saved me a few quid putting the car to a dealers.
ta much!

Oil service reset Chrysler Dodge Crossfire

Reset service light indicator, engine oil life Chrysler Dodge Crossfire, year 2004-2008 reset instructions:

Turn the ignition to run (one position before starting engine).
Within one second press the knob/button twice.
The present status for days or distance is displayed. Within 10 seconds turn the key to OFF/LOCK.
Press and hold the knob/button, while turning the distance is displayed once more. Continue to hold the knob/button. After 10 seconds, a signal sounds and the display shows 7,000 mi or 11000km for 10 seconds.
Release the knob/button.
Turn the ignition off and then start the engine to verify the indicator has been reset.