Tag Archives: mode

Service oil reset Nissan Cube

Leave a reply

2009-2010
Turn the ignition to run (one position before starting engine). The maintenance information (the wrench symbol and distance to change a maintenance item) comes on for about 5 seconds and then turns off.
Push the trip computer mode switch A for 3 seconds while the wrench symbol and maintenance information are displayed. The symbol and distance display will start flashing and the display shows the current interval (ie. 5000KM).
Push the switch A to increase the interval distance. Each step increases the interval by 1000km. The interval distance can be set up to 30000km after the display returns to 0.
If no further action is made, the display returns to the previous mode and the new interval is set. If the interval distance is set to 0, the display will skip the maintenance information when the ignition is placed in run or start mode.

Service oil reset Nissan Armada

Leave a reply

2008-2009
Turn the ignition to run (one position before starting engine).
Press the vehicle information display INFO button located on the isntrument panel to toggel to “Setting”.
In the “Setting” mode screen rotate the INFO button to move to “Maintenance” and press INFO to select the menu.
Set a desired interval by rotating the INFO button to highlight ENGINE OIL and then press the INFO button to select.
Select RESET and select new time or distance.
Repeat step 3 for ENGINE OIL FILTER. Turn the ignition off and then start the engine to verify the indicator has been reset.

Service oil reset Nissan Altima 2007-2015

Leave a reply

How do you reset maintenance light, reset service light indicator Nissan Altima, year 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015. For reset maintenance light and that can be made manually by use button on car dashboard.

Reset service light indicator, engine oil life Nissan Altima 2007-2012, oil reset instructions:

  1. Turn the ignition to run (one position before starting engine/push START/STOP button once).
  2. Press the (square) button, located on the instrument panel just behind the steering wheel to the left, to display the SETTINGS mode.
  3. In the setting mode screen press (circle) button to move to MAINTENANCE.
  4. Set a desired interval by pushing (circle) button to highlight ENGINE OIL and pressing (square) button. The reset mode will open up and allow you to enter the desired distance.
  5. Select RESET and select new time or distance.
  6. Repeat step 3 for ENGINE OIL FILTER. Turn the ignition off and then start the engine to verify the indicator has been reset.

Reset service light indicator, engine oil life Nissan Altima 2014, 2015, oil reset instructions:

  1. Turn the ignition to run (one position before starting engine/push START/STOP button once).
  2. Press the square button (□) , located on the instrument panel just behind the steering wheel to the left, to display the SETTINGS mode.
  3. Use the up/down arrow buttons to highlight SETTINGS and confirm with the ENTER button.
  4. From the SETTINGS menu select MAINTENANCE and confirm with the ENTER button.
  5. Select the maintenance item to be reset; reset distance and confirm with the ENTER button.
  6. Repeat for any other MAINTENANCE items.
  7. Turn the ignition off and then start the engine to verify the indicator has been reset.

Oil service light reset indicator Lexus LS – Series

Leave a reply

Reset service interval display, insp and oil service for Lexus LS – Series, 2004-2010, that can be made manually by use button on car dashboard.

Reset service light indicator, engine oil life Lexus LS – Series, oil reset instructions:

2004
Turn the ignition to run (one position before starting engine).
Press ODO/TRIP button to display odometer mode. Turn ignition off.
While pressing ODO/TRIP button, turn ignition to run (one position before starting engine). Continue to hold the button for longer than 5 seconds.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2005-2006
Turn the ignition to run (one position before starting engine).
Push the “TRIP” button to change the trip meter display to blank. Turn the ignition off.
While pressing the trip meter “RESET” button, turn ignition to run (one position before starting engine). Continue to hold the button for longer than 5 seconds.
“Mileage Reset” appears on the display, the master warning light comes on, and a warning tone sounds.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2007
Turn the ignition to run (one position before starting engine). Use the trip meter switch to bring up the trip meter A reading.Turn the ignition off.
While pressing the trip meter reset button, set the engine switch to run (one position before starting engine) and continue to press and hold the knob until the multi information display indicates that the reset is complete.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2008-2010
Turn the engine on. Use the trip meter switch to bring up the trip meter A reading. Turn the ignition off.
While pressing the trip meter reset button, set the engine switch to run (push START/ STOP button once) and continue to press and hold the knob until the multi information display indicates that the reset is complete.
Turn the ignition off and then start the engine to verify the indicator has been reset.

Oil service light reset indicator Lexus HS250H

Leave a reply

Reset service interval display, insp and oil service for Lexus HS250H, 2010, that can be made manually by use button on car dashboard.

Reset service light indicator, engine oil life Lexus HS250H, oil reset instructions:

2010
Start the engine/hybrid system.
Switch the display to the trip meter ěAî when the hybrid system is operating. Turn the engine/hybrid system off.
While pressing the trip meter reset button, turn the ěPOWERî switch to ON mode. (do not start the hybrid system because otherwise the reset mode will be cancelled). Continue to press and hold the button until the trip meter displays ě000000î and the multi-information display indicates that the reset is complete.
Turn the ignition off and then start the engine to verify the indicator has been reset.