Tag Archives: key

Reset electric power steering system warning light Toyota Yaris

Leave a reply

How to reset electric power steering system warning light Toyota Yaris 2 generation.

Reset electric power steering system warning light Toyota Yaris second generation. From year: 2005, 2006, 2007, 2008, 2009, 2010, 2011.

The light comes on when the ignition key is turned to the “ON” position. If the electric power steering system warning light works properly, the light turns off after a few seconds. If the system has malfunctions, the light comes on again.

If the following conditions occur, this indicates a malfunction somewhere in the parts monitored by the warning light system. Contact your Toyota dealer as soon as possible to service the vehicle.

The light does not come on when the ignition key is turned to the “ON” position or remains on.

The light stays on while you are driving.

The warning light turning on while racing the engine for a long time may not indicate malfunction. To turn off the light, restart the engine and start driving.

If the electric power steering system warning light comes on, take your vehicle to Toyota dealer as soon as possible. In this case, more effort is required for the steering wheel to turn than usual. Drive your vehicle while firmly gripping the steering wheel.

All information how can you reset electric power steering system warning light is taken from Toyota Yaris owners manual.

Reset SRS airbag warning light Toyota Yaris second generation

Leave a reply

How to reset SRS airbag warning light Toyota Yaris 2 generation.

Reset SRS airbag warning light Toyota Yaris second generation. From year: 2005, 2006, 2007, 2008, 2009, 2010, 2011.

This light will come on when the ignition key is turned to the “ON” position. After about 6 seconds, the light will go off. This means the system of the airbags and front seat belt pretensioners are operating properly.

The warning light system monitors the airbag sensor assembly, front airbag sensors, side and curtain shield airbag sensors, curtain shield airbag sensors, driver’s seat position sensor, driver’s seat belt buckle switch, front passenger occupant classification system, “AIRBAG ON” indicator light, “AIRBAG OFF” indicator light, front passenger’s seat belt buckle switch, seat belt pretensioner assemblies, inflators, interconnecting wiring and power sources.

If either of the following conditions occurs, this indicates a malfunction somewhere in the parts monitored by the warning light system. Contact your Toyota dealer as soon as possible to service the vehicle.

The light does not come on when the ignition key is turned to the “ON” position or remains on for more than 6 seconds or flashes.
The light comes on or starts flashing while driving.
All information how can you reset SRS aibar light is taken from Toyota Yaris second generation owners manual.

Oil reset service light indicator Chevrolet Cavalier

Leave a reply

Reset service light indicator, engine oil life Chevrolet Cavalier, oil reset instructions:

Reset service light indicator Chevrolet Cavalier. For reset maintenance light and that can be made manually by use button on car dash board

 

How do you reset service light indicator Chevrolet Cavalier.

  1. Make sure the light is has a wrench icon. This article is not intended to help reset a “service engine” light.
  2. Without turning on your car, turn the key to the right and you will see all of your dash lights come on.
  3. Press on the brake 4 times.
  4. On the 4th time, hold the brake petal down for 30 seconds and release.
  5. This should reset the light.

 

Reset seat belt reminder light Toyota Tundra second generation

Leave a reply

How to reset seat belt reminder light Toyota Tundra 2 generation.
Reset seat belt reminder light Toyota Tundra second generation. From year: 2005-2014.

Driver’s Seat Belt Reminder Light and Buzzer.

The light and buzzer act as a reminder to buckle up the driver’s seat belt. Once the ignition key is turned to “ON” or “START”, the reminder light flashes and buzzer sounds if the driver’s seat belt is not fastened. Unless the driver fastens the belt, the light continues flashing and the buzzer stops after about 4 to 8 seconds.

Front Passenger’s Seat Belt Reminder Light.

The light acts as a reminder to have the front passenger buckle up the seat belt. Once the ignition key is turned to “ON”, the reminder light flashes if a passenger sits in the front passenger seat and does not fasten the seat belt. If luggage or other load is placed on the front passenger seat, depending on its weight, the reminder light may come on.

All information how can you reset seat belt reminder light is taken from Toyota Tundra second generation owners manual.

That it is the full procedure how to reset seat belt reminder light Toyota Tundra second generation. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Toyota cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders by yourself.

This is an information site where you can solve your car problems. Send us a comment if our procedures are correctly. If you would have anything to add, for us every opinion counts.

Reset oil service light indicator Toyota Tundra second generation

Leave a reply

Reset oil service light indicator, engine oil life Toyota Tundra 2. From year: 2005-2014 reset instructions:

How to reset oil service light Toyota Tundra 2 generation.

This light acts as a reminder when to replace the engine oil. This light will come on when the ignition key is turned to “ON” and will go off after about a few seconds. When you drive for about 7200 km (4500 miles) after the engine oil replacement, this light illuminates for about 3 seconds and then flashes for about 12 seconds with the ignition key turned to the “ON” position. If you continue driving without replacing the engine oil, and if the distance driven exceeds 8000 km (5000 miles), the light will come on after the ignition key is turned to “ON” position. The light will remain on thereafter. If the light is flashing, we recommend that you replace the engine oil at an early opportunity depending on the driving and road conditions. If the light comes on, replace it as soon as possible.

The system must be reset after the engine oil replacement. Reset the system by the following procedure:

When tje Maint Requd appears on a Toyota Tundra you must follow this steps to reset the warning light.

1. Turn the ignition key to the “ACC” or “LOCK” position with the odometer reading shown.
2. Turn the ignition key to the “ON” position while holding down the trip meter reset knob. See below pictures.
3. On dash will appear ” – – – – – – ” who will blink.
4. Hold down the knob for at least 5 seconds. The odometer indicates “000000” and the light goes off.
5. If the system fails to reset, the light will continue flashing.

All information how can you reset oil service light is taken from Toyota Tundra second generation owners manual.