Reset service light indicator, engine oil life citroen piccaso reset instructions:
To reset the service light on your vehicle is a straight forward procedure. Ignition off , Hold down the left dash button with the 000 s on . Whilst holding the button turn on the ignition and watch the display count down to 0 . Turn ignition off then on again and there you have it. Magic. Obviously this should be done in conjunction with a routine service to insure your car is safe reliable and legal .
How do you reset maintenance light, reset service light indicator vauxhall signum, year 2004. For reset maintenance light and that can be made manually by use button on car dashboard.
Reset service light indicator, engine oil life vauxhall signum 04, oil reset instructions:
Considering it’s made by a GM company, I would assume the standard practice here works there…
Turn key to on, but do not start…
Pump gas peddle three times…
Press and hold brake peddle till the service light blinks and then goes out…
Start the car to make sure the light was reset…
Or…
Turn to on…
Hold trip reset button…
Start car
keep holding trip reset till the light on the dash goes out…
Hopefully one of those works, but they’re just kinda the ‘try this’ until someone who knows chimes in.
How do you reset maintenance light, reset service light indicator Vauxhall Opel Signum/Vectra. For reset maintenance light and that can be made manually by use button on car dashboard.
Reset service light indicator, engine oil life Vauxhall Opel Signum/Vectra, oil reset instructions:
Is there a way to reset the service light on a 55 plate Vauxhall Signum 1.9 cdti design without going to a VX Dealer
Turn on Ignition to confirm
I second that, as I was shown how to do it. Follow it, VEry simple instructions.
Have your key in the ignition, but off. Well make sure its at trip A before you start this.
Next, press the button, but leave it pressed….
Now put the car into the “on” position….
The indicator will show a bar like it was counting down, wait till that finishes and it all starts to show 0000miles or whatever it is. And let go.
Your done.
1. With the car started (ignition on), set the LCD odometer readout to total mileage (not trip A or B).
2.Turn the car off (ignition key to the OFF position).
3. Push in AND HOLD the button/knob that switches the odometer
4. Turn key to ON position without starting the car. You will notice the maintenance light blink and go out.
5. Release the odometer button/knob.
6. Turn key to OFF position.
That’s it! The “MAINT REQD” light has been reset to warn you to change your oil in another 5,000 or 7,500 miles or so.