Tag Archives: OIL LIFE REMAINING

Oil light reset maintenance Buick LaCrosse

Leave a reply

Reset service light indicator, engine oil life Buick LaCrosse, year 2005, 2006-2010, 2011-2013 reset instructions:

2005

1. Turn the ignition to run (one position before starting engine).
2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
3. If the CHANGE OIL SOON indicator flashes
engine and repeat steps).
4. Turn the ignition off and start the engine to verify the indicator has been reset.

2006-2010

With Driver Information Centre (DIC):
1. Turn the ignition to run (one position before starting engine).
2. Press the OPTION button on the DIC until ENGINE OIL MONITOR appears on the DIC screen.
3. Press the SET/RESET button to reset the system. The next screen indicates that the CHANGE OIL SOON message has been reset. If the vehicle has the up level DIC, when the gauges button is pressed and the OIL LIFE REMAINING mode appears, it should read 100% OIL LIFE REMAINING.
4. Turn the ignition off and start the engine to verify the indicator has been reset.

Without Driver Information Centre:
1. Turn the ignition to run (one position before starting engine).
2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
3. If the CHANGE OIL SOON indicator flashes, the system is reset (if this does not happen, turn off the
engine and repeat steps).
4. Turn the ignition off and start the engine to verify the indicator has been reset.

2011-2013

1. Turn the ignition to run (one position before starting engine).
2. Press the DIC menu button on the turn signal lever to enter the vehicle information menu. Use the thumbwheel to scroll through the menu items until you reach REMAINING OIL LIFE.
3. Press the SET/CLR button to reset the oil life to 100%.
4. Turn the ignition off and start the engine to verify the indicator has been reset.

Oil light reset maintenance Buick Enclave

Leave a reply

Reset service light indicator, engine oil life Buick Enclave, year 2008-2013 reset instructions:

1. Turn the ignition to run (one position before starting engine).
2. Press the vehicle information button (i) until OIL LIFE REMAINING displays.
3. Press and hold the SET/RESET (check mark) button until 100% is displayed. You will hear 3 chimes and the CHANGE ENGINE OIL SOON message will go off.
4. Start the engine and verify CHANGE OIL SOON light goes out (if this does not happen, turn off the engine and repeat steps).

Oil service reset LSS

Leave a reply

1997

Turn the ignition to run (one position before starting engine).
Display the oil life index on the Driver Information System.
Hold the RESET button for 5 seconds.
Turn the ignition off and then start the engine to verify the indicator has been reset.

1998

Turn the ignition to run (one position before starting engine).
Press the TRIP button on the Driver Information System (DIC) switch to view various menu choices and stop on OIL LIFE REMAINING.
Press and hold the RESET button on the DIC switch for more than 5 seconds. The oil life will change to 100%.
Turn the ignition off and then start the engine to verify the indicator has been reset.

Oil service reset Eighty-Eight

Leave a reply

1994-1995

Engine Oil Life Monitor
Turn the ignition to run (one position before starting engine).
Display the oil life index on the Driver Information System.
Hold the RESET button for 5 seconds. When a DIC message of RESET is displayed and the oil life index equals 100%, the reset is complete.
Turn the ignition off and then start the engine to verify the indicator has been reset.
Change Oil Soon
Turn the ignition to run (one position before starting engine).
Press OIL button and release.
Select OIL menu by pressing MODE button.
Press and hold the RESET button for 5 to 7 seconds.
Turn the ignition off and then start the engine to verify the indicator has been reset.

1996-1997

Turn the ignition to run (one position before starting engine).
Display the oil life index on the Driver Information System.
Hold the RESET button for 5 seconds.
Turn the ignition off and then start the engine to verify the indicator has been reset.

1998

Turn the ignition to run (one position before starting engine).
Press the TRIP button on the Driver Information System (DIC) switch to view various menu choices and stop on OIL LIFE REMAINING.
Press and hold the RESET button on the DIC switch for more than 5 seconds. The oil life will change to 100%. The engine oil life monitor is now reset.
Turn the ignition off and then start the engine to verify the indicator has been reset.

1999

Turn the ignition to run (one position before starting engine).
Press and hold the OIL RESET button in the IP storage compartment for at least 5 seconds, but no more than 60 seconds.
After 5 seconds, observe the CHANGE OIL SOON light flash 4 times before light turns off. This indicates that the engine oil life monitor system has reset.
Turn the ignition off and then start the engine to verify the indicator has been reset.

Oil service reset Saturn Outlook

Leave a reply

2007-2009

If your vehicle does not have Driver Information Center (DIC) buttons:
Turn the ignition to run (one position before starting engine).
Press the trip odometer reset stem until OIL LIFE REMAINING displays.
Press and hold the trip odometer reset stem until OIL LIFE REMAINING shows 100%. You will hear 3 chimes and the CHANGE ENGINE OIL SOON message will go off.
Turn the ignition off and then start the engine to verify the indicator has been reset.

If your vehicle has Driver Information Center (DIC) buttons:
Turn the ignition to run (one position before starting engine).
Press the vehicle information button (square) until OIL LIFE REMAINING displays.
Press and hold the set/reset button (arrow) until 100% is displayed. You will hear 3 chimes and the CHANGE ENGINE OIL SOON message will go off.
Turn the ignition off and then start the engine to verify the indicator has been reset.