Tag Archives: OFF

Service oil reset Nissan Pathfinder

Leave a reply

2006-2007
Turn the ignition to run (one position before starting engine).
When you turn the ignition key run, the system start-up warning is displayed on the screen. Read the the warning and select the OK key by pressing the ENTER button.
When the TRIP button is pressed, the following modes will display on the screen: Warning message (if any) TRIP1 > TRIP 2 > FUEL ECONOMY > MAINTENANCE > AUDIO OR OFF > TRIP 1
Select MAINTENANCE and then select the Engine Oil key using the joystick and press the ENTER button to display the screen to change the maintenance interval/RESET.
To return to the previous display after the MAINTENANCE NOTICE screen is displayed, press the BACK button.
Turn the ignition off and then start the engine to verify the indicator has been reset.

2008-2010
Turn the ignition to run (one position before starting engine).
Press the INFO button and select the Maintenance Key using the NISSAN controller; the maintenance information will be displayed on the screen.
Select one of the Reminder (1 – 4) keys using the NISSAN controller and press the ENTER button to display the screen to change the maintenance interval.
To reset the reminder schedule (distance) to 0 mi (km), select the Reset Distance key using the NISSAN contoller.
Turn the ignition off and then start the engine to verify the indicator has been reset.

Service oil reset Nissan Maxima

Leave a reply

2006-2008
Turn the ignition to run (one position before starting engine).
When you turn the ignition key run, the system start-up warning is displayed on the screen. Read the the warning and select the OK key by pressing the ENTER button.
When the TRIP button is pressed, the following modes will display on the screen: Warning message (if any) TRIP1 > TRIP 2 > FUEL ECONOMY > MAINTENANCE > AUDIO OR OFF > TRIP 1
Select MAINTENANCE and then select the Engine Oil key using the joystick and press the ENTER button to display the screen to change the maintenance interval/RESET.
To return to the previous display after the MAINTENANCE NOTICE screen is displayed, press the BACK button.
Turn the ignition off and then start the engine to verify the indicator has been reset.

2009-2010
Turn the ignition to run (push START/STOP button once).
Press the (square) button, located on the instrument panel just behind the steering wheel to the left, to display the SETTINGS mode.
In the setting mode screen press (circle) button to move to MAINTENANCE.
Set a desired interval by pushing (circle) button to highlight ENGINE OIL and pressing (square) button. The reset mode will open up and allow you to enter the desired distance.
Select RESET and select new time or distance.
Repeat step 3 for ENGINE OIL FILTER. Turn the ignition off and then start the engine to verify the indicator has been reset.

Service oil reset Mitsubishi Lancer

Leave a reply

2008-2010
The “—” display can be reset while the ignition switch is “OFF”. When the display is reset, the time until the next periodic inspection is displayed and “PERIODIC INSPECTION” is no longer displayed when the ignition is switched from “OFF” to “ON”.
Lightly press the multi-information meter switch until the information screen switches to service reminder display screen.
Press and hold the multi-information meter switch for about 2 seconds or more to display the (wrench icon) and make it flash.
Lightly press the multi-information meter switch while the icon is flashing to change the display from “—” to “CLEAR”. After this, the time until the next periodic inspection will be displayed.
Start the engine to verify the indicator has been reset.

Service oil reset Mitsubishi Lancer Evolution

Leave a reply

How do you reset maintenance light, reset service light indicator Mitsubishi Lancer Evolution, year 2008, 2009, 2010. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Mitsubishi Lancer Evolution, oil reset instructions:

  • The “—” display can be reset while the ignition switch is “OFF”. When the display is reset, the time until the next periodic inspection is displayed and “PERIODIC INSPECTION” is no longer displayed when the ignition is switched from “OFF” to “ON”.
  • Lightly press the multi-information meter switch until the information screen switches to service reminder display screen.
  • Press and hold the multi-information meter switch for about 2 seconds or more to display the (wrench icon) and make it flash.
  • Lightly press the multi-information meter switch while the icon is flashing to change the display from “—” to “CLEAR”. After this, the time until the next periodic inspection will be displayed.
  • Start the engine to verify the indicator has been reset.

Service oil reset Mitsubishi Lancer Sportback

Leave a reply

2009-2010
The “—” display can be reset while the ignition switch is “OFF”. When the display is reset, the time until the next periodic inspection is displayed and “PERIODIC INSPECTION” is no longer displayed when the ignition is switched from “OFF” to “ON”.
Lightly press the multi-information meter switch until the information screen switches to service reminder display screen.
Press and hold the multi-information meter switch for about 2 seconds or more to display the (wrench icon) and make it flash.
Lightly press the multi-information meter switch while the icon is flashing to change the display from “—” to “CLEAR”. After this, the time until the next periodic inspection will be displayed.
Start the engine to verify the indicator has been reset.