Tag Archives: light

Reset the oil service light indicator for a Volkswagen Eos 2013

Leave a reply

How do you reset service light indicator Volkswagen EOS year 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013

1. Turn the ignition off.
2. Press and hold the 0,0 button (located to the right of the instrument cluster).
3. Turn the igntion on (do not start the engine) and release the 0,0 button. Briefly press the double square button (located to the left of the instrument cluster).
4. Turn the ignition off and then start the engine to verify the indicator has been reset.
or
2. Use the rocker switch on the windshield wiper lever to select “Settings” and confirm with button underneath windshield wiper lever then follow steps 4-5.
or
3. Use the buttons on the right hand side of the multi function steering wheel
4. Select the “Settings” menu followed by the “Service” submenu. Select “Reset” and confirm.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.
*vehicles equipped with a navigation system can also access the reset menu from the SETTINGS button.

Service light reset Volkswagen Phaeton 2003 – 2009

Leave a reply

How do you reset service light indicator Volkswagen Phaeton year 2003, 2004, 2005, 2006, 2007, 2008, 2009

1. Turn the ignition to run (one position before starting engine).
2. Press the VEHICLE button followed by SERVICE INTERVAL and follow the prompt to reset.
3. Turn the ignition off and then start the engine to verify the indicator has been reset.

Oil reset service light indicator Dacia Logan MCV DCI.

Leave a reply

Guide: How to Reset the Maintenance Light on Dacia Logan MCV DCI

Whether you own an older or a newer model of the Dacia Logan MCV DCI, it’s crucial to understand how to reset the maintenance light. This indicator reminds you when it’s time for service, ensuring your car remains in optimal condition. In this guide, we’ll demonstrate the manual reset process using the buttons on your dashboard.

Dacia Logan MCV DCI - Reset Maintenance Light

Steps to Reset the Oil Service Light on Dacia Logan MCV DCI

Follow these straightforward steps for both older and newer models of the Dacia Logan MCV DCI:

  1. Turn the ignition to the “ON” position.
  2. Firmly press and hold the throttle pedal.
  3. Quickly press the brake pedal three times.

Ensure you complete all steps within 10 seconds for the reset to be successful.

Upon following these steps, the oil change warning light should switch off. If it doesn’t, try the process once more to ensure you’ve followed the sequence correctly.

Additional Tips for Dacia Logan MCV DCI Owners

  • Always refer to your owner’s manual for any specific instructions related to your model year.
  • Consider setting a regular maintenance schedule even if the light hasn’t turned on to keep your vehicle in top shape.
  • If unsure about any procedures, don’t hesitate to consult with a Dacia service specialist.

Conclusion

Knowing how to reset the maintenance light on your Dacia Logan MCV DCI ensures you’re proactive about your vehicle’s health. Always prioritize regular servicing to maintain your car’s efficiency and longevity.

How to oil reset, service light reset (Insp, service) instructions for most cars

Leave a reply

Find how to reset any maintenance light or reset oil life after an oil change for all makes and models. Acura, Audi, BMW, Buick, Cadillac, Chevrolet, Chrysler, Ford, Honda, Hummer, Infiniti, Land Rover, Lexus, Infiniti, Mercury, Mini, Mitsubishi, Nissan, Oldsmobile, Pontiac, Porsche, Saab, Saturn, Scion, Suzuki, Toyota, Volkswagon, Volvo
[wp_sitemap_page]

How reset oil light GMC C-K Trucks

Leave a reply

How do you reset maintenance light, reset service light indicator GMC C-K Trucks. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life GMC C-K Trucks, oil reset instructions:

year 1999-2000

1. Turn the ignition to run (one position before starting engine).
2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds. If the light flashes 2 times the system is reset. If the light comes on and stays on for 5 seconds the system did not reset.
3. Turn the ignition off and then start the engine to verify the indicator has been reset.