Tag Archives: light indicator

Reset engine oil life indicator Hummer H2

Leave a reply

How do you reset maintenance light indicator, reset service light indicator Hummer H2, year 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012. For reset maintenance light and that can be made manually by use button on car dash board.
Reset engine oil life indicator Hummer H2

  1. Turn the ignition to run (one position before starting engine).
  2. Press the fuel information button (located on instrument panel cluster above steering column) until ENGINE OIL LIFE appears in the display.
  3. Press and hold the select button (arrow button) for 5 seconds while ENGINE OIL LIFE is displayed. OIL LIFE RESET will appear on the display for 10 seconds to let you know the system is reset.
  4. Turn the ignition off and then start the engine to verify the indicator has been reset.

Reset service light indicator Seat Arosa

Leave a reply

Reset service light indicator Seat Arosa. From year: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004.

How to reset service light indicator Seat Arosa.

1. With the ignition switched off.
2. Push and hold the tripmeter reset button situated below the speedometer.
3. Turn the ignition on and hold the tripmeter reset button for atleast 8 sconds.
4. On board will appear “- – – -” done the service light has been reset.
5. It may not works on the first try, you must retry the procedure.

Reset service light indicator Seat Inca

Leave a reply

Reset service light indicator Seat Inca. From year: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003.

How to reset service light indicator Seat Inca.

1. Turn on the ignition, do not start the engine.
2. Push and holf the left hand button on the clocks.
3. With the button still pressed turn the ignition to off.
5. Release the button and you should be able to toggle between the oil, insp1 and insp2 warning light.
6. Choose the warning light that you want to reset.
7. On the right hand side of the clocks there are 2 buttons.
8. Push the bottom button with a biro and hold it until the warning light is reset.

Oil service reset Mercedes Benz GL – Class

Leave a reply

Reset service light indicator, engine oil life Mercedes Benz GL – Class, year: 2007-2012, oil reset instructions:

1. Turn the ignition to position 1. (close all doors
2. Press the system selection button (3 located on the lower left of the steering wheel) repeatedly until the kilometer or temperature reading is shown in the multi information display.)
3. Press the TRIP reset button (center button on instrument panel) quickly 3 times. An audible beep will be heard followed by the battery voltage displayed.
4. Press the scoll forward/back button (left side of steering wheel) to highlight the “”Service menu””.”
5. Use the +/- buttons to select “”Confirmation”” menu. Press the system select button to confirm. The menu item “”Complete service”” is highlighted.”
6. Press the system selection button to confirm. “”Service confirmed”” appears.”
7. Use the scroll forward/back button to exit the menu.
8. Turn the ignition off and then start the engine to verify the indicator has been reset.