Tag Archives: LIFE

Oil service reset Lincoln MKZ

Leave a reply

How do you reset maintenance light, reset service light indicator Lincoln MKZ, year 2010. For reset maintenance light and that can be made manually by use button on car dash board.

Instructions to reset service indicator 2010

  • Turn the ignition to run (one position before starting engine).
  • Press and release SETUP to display “OIL LIFE XXX% HOLD RESET = NEW”.
  • Press and hold RESET for 2 seconds and release to reset the oil life to 100%.
  • Turn the ignition off and then start the engine to verify the indicator has been reset.

Oil service reset Lincoln MKS

Leave a reply

How do you reset maintenance light, reset service light indicator Lincoln MKS, year 2009, 2010. For reset maintenance light and that can be made manually by use button on car dash board.

Instructions to reset service indicator 2009-2010

  • Turn the ignition to run (one position before starting engine/ one push of START/STOP button).
  • Press and release SETUP to display “OIL LIFE XXX% HOLD RESET = NEW”.
  • Press and hold RESET for 2 seconds and release to reset the oil life to 100%.
  • Turn the ignition off and then start the engine to verify the indicator has been reset.

Oil service reset Lincoln LS

Leave a reply

How do you reset maintenance light, reset service light indicator Lincoln LS, year 2000, 2001, 2002, 2003, 2004, 2005, 2006. For reset maintenance light and that can be made manually by use button on car dash board.

Instructions to reset service indicator 2000-2006

  • Turn the ignition to run (one position before starting engine).
  • Press the STATUS control to access the System Check function.
  • Press RESET to reset oil %.
  • Press and hold the RESET control to set to 100%. After a successful reset, the message centre will display OIL LIFE SET TO 100%.
  • Turn the ignition off and then start the engine to verify the indicator has been reset.

Oil service reset Chevrolet GMC Trucks Suburban/Tahoe/Yukon

Leave a reply

How do you reset maintenance light, reset service light indicator Chevrolet GMC Trucks Suburban/Tahoe/Yukon. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Chevrolet GMC Trucks Suburban/Tahoe/Yukon, oil reset instructions:

2000-2006

Turn the ignition to run (one position before starting engine).
Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
If the Change Oil Soon light flashes the system is resetting.
Turn the ignition off and then start the engine to verify the indicator has been reset.

2007-2010

Turn the ignition to run (one position before starting engine).
Display the OIL LIFE REMAINING on the DIC (i button). If the vehicle does not have DIC buttons, the vehicle must be in P (Park) to access this display by pressing the trip odometer reset stem.
Press and hold the SET/RESET (check mark) button on the DIC , or the trip odometer reset stem if vehicle does not have DIC buttons for more than 5 seconds. The oil life will change to 100%.
Turn the ignition off and then start the engine to verify the indicator has been reset.

or

Turn the ignition to run (one position before starting engine).
Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
Display the OIL LIFE REMAINING on the DIC. If the display shows 100%, the system is reset. If the vehicle has a CHANGE OIL SOON message this should be off.
Turn the ignition off and then start the engine to verify the indicator has been reset.

Oil service reset Chevrolet GMC Trucks Terrain

Leave a reply

How do you reset maintenance light, reset service light indicator Chevrolet GMC Trucks Terrain. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Chevrolet GMC Trucks Terrain, oil reset instructions:

2010

With Driver Information Centre (DIC):
Turn the ignition to run (one position before starting engine).
Press the MENU button until vehicle information menu is displayed then scroll through the menu with the down arrow until Remaining Oil Life is selected then press SET/CLR (check button) to select.
Use up or down arrow to select YES to reset.
Confirm reset by pressing SET/CLR button.
Turn the ignition off and then start the engine to verify the indicator has been reset.
Without Driver Information Centre (DIC):
Turn the ignition to run (one position before starting engine).
Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
If the Change Engine Oil Soon message goes off the system is reset.
Turn the ignition off and then start the engine to verify the indicator has been reset.