Tag Archives: ignition

Renault Laguna 2 service light reset

How do you reset maintenance light, reset service light indicator Renault Laguna 2. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Renault Laguna 2, oil reset instructions:

How to reset oil service light Renault Laguna 2.

With the ignition on, Press the end of the wiper stalk until miles to service appears on the dash screen.

Now, press and hold the mileage reset button on the instrument binnacle for more than 5 seconds, it will start to flash. Let go. This will reset your miles to service to the factory setting and get rid of the flashing spanner!

Reset service Renault Clio 2 1997 to 2005 without steering wheel stork

How do you reset maintenance light, reset service light indicator Renault Clio 2, 1997 to 2005. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Renault Clio 2, oil reset instructions:

Press and hold the odometer reset button

Turn the ignition key to position 2

After 30 seconds release the odometer reset button

Turn ignition off

You may notice the display flashing or counting down.

Oil service light reset indicator Renault Laguna 2

How do you reset maintenance light, reset service light indicator Renault Laguna 2. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Renault Laguna 2, oil reset instructions:

With the ignition on, Press the end of the wiper stalk until miles to service appears on the dash screen.

Now, press and hold the mileage reset button on the instrument binnacle for more than 5 seconds, it will start to flash. Let go

This will reset your miles to service to the factorysetting and get rid of the flashing spanner !

Hope this helps a few people.

Reset the Mercedes-Benz SLK 230 for an Oil Change

Reset service light indicator, engine oil life Mercedes-Benz SLK 230, oil reset instructions:

The Mercedes-Benz SLK 230 features an engine oil-life tracking system as part of the car’s computer. The computer monitors driving habits and engine conditions to determine when the oil needs to be changed. The control panel displays a reminder when the car needs an oil change. In order for the computer system to work correctly to predict the next oil change, reset the light following an oil service.

1. Insert the key in the ignition. Turn the key to position “2.”

2. Press the adjust button twice within one second. The adjust button is located below the speedometer.

3. Turn the ignition off.

4. Press and hold the adjust button. Turn the ignition to position “2.”

5.Release the adjust button after a signal sounds and the service indicator resets visibly.

Service light reset indicator for BMW 525i

Reset service light indicator, engine oil life BMW 525i reset instructions:

The good news is you can do it yourself as i explained to the car owner.

Here is how:

With the ignition off.

Press and Hold the trip meter button,

keep held in and turn ignition to position 1 this is the first click the one before the ignition lights come on

Keep the button pressed in for about 5 seconds until you see “Oil Service” or “Inspection” with “Reset” or “Re” in the display.

(On vehicles with “High” cluster, you will also see the amount of fuel in litres remaining until next service).

Quikly release and Press the button again now hold for a further 5 seconds or until “Reset” or “Re” flashes.

While this display is flashing,quickly release and press the button again to reset the Service Interval.

After the display has shown the new service interval you should see END SIA” for about 2 secs.

Please note this procedure should only be used after you car has been serviced and i would qeustion any company who is unable to reset the

service/oil light either using diagnostic equipment or using this method after they have have serviced a vehicle.