Tag Archives: ignition

Service Light Reset indicator Citroen Xsara Picasso

Leave a reply

Reset service light indicator, engine oil life Citroen Xsara Picasso reset instructions:

How to Reset the Service Light Citroen Xsara Picasso

Recently I have had a few requests for Citroen Xsara Picasso Service Light Reset information from people who service their own vehicles.

Being a mobile mechanic and auto diagnostic specialist I could use the stock answer and say “I’ll have to plug it in for you”.

As you have no doubt seen through my other posts I do not believe in making things difficult for the home mechanic.
Here is the procedure:

Sit in drivers seat ignition off and handbrake applied.

Press and hold trip reset button.

Turn key to position two (ignition lights on engine not started).

Keeping the trip reset button pressed in you will notice your trip meter counting down.

When zero (0) is reached start the car and the service light (spanner symbol) should now be extinguished.

Please only use this information after your vehicle has been serviced

Reset oil service Skoda 2000

Leave a reply

Skoda 2000

Longlife service intervals require diagnostic tool. Fixed intervals: Press and hold button below the speedometer. Turn ignition to the “ON” position.
“SERVICE” is displayed. Release button. Turn button below the tachometer to the right until display is reset. Turn ignition off.

Reset oil service Toyota

Leave a reply

Toyota 4Runner 2003-onwards

With the ignition “OFF”, press and hold “RESET” button. Turn ignition to the “ON” position. Continue to hold button until “MAINT REQD” light turns off.
Turn ignition off.

Camry 2004-onwards
With the ignition “OFF”, press and hold button below the speedometer. Turn ignition to the “ON” position. Continue to hold button until “000000″ isdisplayed and the “MAINT REQD” lamp turns off. Turn ignition off.

Corolla

Turn the key to the off position. Press and hold down the trip meter button and turn the key to the “on” position. Continue to hold the trip button for 5 seconds after the key is turned on, then release.

Highlander 2004-onwards
With the ignition “OFF”, press and hold button below the speedometer. Turn ignition to the “ON” position. Continue to hold button until “000000″ isdisplayed and the “MAINT REQD” lamp turns off. Turn ignition off.

Matrix 2004-onwards
With the ignition “OFF”, press and hold button below the speedometer. Turn ignition to the “ON” position. Continue to hold button until “000000″ isdisplayed and the “MAINT REQD” lamp turns off. Turn ignition off.

Prius 2004-onwards
With the “POWER” switch off, press and hold “ODO TRIP” button. Press “POWER” switch twice selecting “IG-ON”. Continue to hold button until”000000″ is displayed and “MAINT REQD” light turns off. Turn “POWER” switch to off.

RAV4 2004-onwards
With the ignition “OFF”, press and hold button below the speedometer. Turn ignition to the “ON” position. Continue to hold button until “000000″ isdisplayed and the “MAINT REQD” lamp turns off. Turn ignition off.

Sequoia 2004-onwards
With the ignition “OFF”, press and hold button below the speedometer. Turn ignition to the “ON” position. Continue to hold button until “000000″ isdisplayed and the “MAINT REQD” lamp turns off. Turn ignition off.

Sienna 2004-onwards
With the ignition “OFF”, press and hold button to the right of the speedometer. Turn ignition to the “ON” position. Continue to hold button until “000000″
is displayed and the “MAINT REQD” lamp turns off. Turn ignition off.

Solara 2004-onwards
With the ignition “OFF”, press and hold button to the left of the speedometer. Turn ignition to the “ON” position. Continue to hold button until “000000″ isdisplayed and the “MAINT REQD” lamp turns off. Turn ignition off.

Tacoma 2005-onwards
With the ignition “OFF”, press and hold button to the right of the speedometer. Turn ignition to the “ON” position. Continue to hold button until “000000″
is displayed and the “MAINT REQD” lamp turns off. Turn ignition off.

Tundra 2003-onwards
With the ignition “OFF”, press and hold button below the speedometer. Turn ignition to the “ON” position. Continue to hold button until “000000″ isdisplayed and the “MAINT REQD” lamp turns off. Turn ignition off.

Reset oil service vz commodore

1 Reply

1. Turn Igniton off
2. With ignition ‘OFF’ press and hold both arrow buttons, turn ignition on.
3. Release buttons after 3 seconds – the reset reminder should be flashing.
4. Press and hold set button for approx 3 seconds or until beep.
5. If you need to reset oil service – Press and hold set button again for approx 3 seconds or until beep. ‘Service Reset No Items’ should show.

Reset oil service light Ford Escape 2010

Leave a reply

How do you reset maintenance light indicator, reset service light indicator Ford Escape, year 2010, 2011, 2012. For reset maintenance light and that can be made manually by use button on car dash board.

Reset oil service light Ford Escape 2010

  1. Turn the ignition to run (one position before starting engine).
  2. Press and release the SETUP button to display “OIL LIFE XXX% HOLD RESET = NEW”.
  3. Press and hold the RESET button for two seconds and release to reset the oil life to 100% and “OIL LIFE SET TO 100%” is displayed.
  4. Turn the ignition off and then start the engine to verify the indicator has been reset