Tag Archives: warning light

Reset ABS warning light Toyota Land Cruiser 100 series

Leave a reply

How to reset ABS warning light Toyota Land Cruiser 100 series.

Reset ABS warning light Toyota Land Cruiser 100 series. From year: 2002, 2003, 2004, 2005, 2006, 2007.

The light comes on when the ignition key is turned to the “ON” position. If the anti−lock brake system and the brake assist system work properly, the light turns off after a few seconds. Thereafter, if either of the systems malfunctions, the light comes on again.

When the “ABS” warning light is on (and the brake system warning light is off), the anti−lock brake system, the brake assist system, the vehicle stability control system and/or active traction control system do/does not operate, but the brake system still operates conventionally. When the “ABS” warning light is on (and the brake system warning light is off), the anti−lock brake system does not operate so that the wheels could lock up during a sudden braking or braking on slippery road surfaces.

If either of the following conditions occurs, this indicates a malfunction somewhere in the components monitored by the warning light system. Contact your Toyota dealer as soon as possible to service the vehicle.

  • The light does not come on when the ignition key is turned to the “ON” position, or remains on.
  • The light comes on while you are driving.
  • A warning light turning on briefly during operation does not indicate a problem.

If the “ABS” warning light remains on together with the brake system warning light, immediately stop your vehicle at a safe place and contact your Toyota dealer.

Timing Belt Warning Indicator Reset Procedure For LandCruiser

Leave a reply

Reset Procedure For Toyota LandCruiser UZJ100, HZJ105 and HDJ100

1. T-BELT MODE DISPLAY
a) With ignition turned ON, using the trip switch (select/reset button) change the display to ODO, and turn the ignition OFF
b) While pressing the trip switch, turn the ignition switch ON and hold it for 5 seconds.
c) Release the trip switch, then press the switch again within 5 seconds.
d) The digital display should change to T-belt mode. The initial display “15” (0,000km) is displayed (ie. 150,000km).

2. REWRITING REPLACEMENT VALUES
While in the T-Belt mode, each press of the trip switch will change the displayed value by 10,000km increments. Once ” 20 ” (200,000km) is reached the display reverts back to ” 1 ” (10,000km) again. Remember, this setting is the number of kilometres to be travelled before the light comes on next, and once reset this counter will start from zero.
I believe the timing belt interval for all the 100 series engine variants is 150,000km, but this should be checked against each different markets servicing recommendation. This being the case, you shouldn’t need to change from the default setting of “15”.
Obviously for the US, the ODO is in miles, and I guess the T-Belt warning would be set in 10,000 mile intervals.

3. T-BELT WARNING RESET COMPLETION
a) After setting the replacement setting value, hold the trip switch ON for more than 5 seconds then release the switch.
b) Check that the display has now changed back to ODO and that the warning light has gone off when the engine is started.
NOTE: If the T-Belt mode is completed, even though the belt replacement has not been performed, the T-Belt warning IS reset.
I hope this proves to be of assistance guys, as usual all care no responsibility. ;-)

Reset fog light failure Saab 9-3

Leave a reply

How to reset fog light failure Saab 9-3 first generation.

Reset fog light failure Saab 9-3 first generation. From year: 1998, 1999, 2000, 2001, 2002.

  1. Turn ignition to ON position, do not start the engine.
  2. The fog light warning light message cannot be removed by pressing CLEAR button.
  3. To reset the fog light press the brake pedal to clear.

All information how to reset test brake message on a Saab 9-3 is taken from owners manual.
CHECK messages. When the engine is started, CHECKING will appear on the display for about four seconds, while the Saab Information Display (SID) checks are being performed. When a CHECK message is generated while the car is being driven, a chime will sound, INFO DISPL will illuminate on the main instrument panel, and the message will appear on the Saab Information Display (SID). The number of messages that can be displayed by the Saab Information Display (SID) varies with the specification of the car. If more than one CHECK message has been generated, the + symbol will appear to the left of the text on the display. The messages appear in order of priority. If a new fault occurs while another message is being displayed, the message relating to the new one will appear for 10 seconds, after which the display will return to the earlier one. Press CLR once to acknowledge a message, hereupon it will be cleared from the display. It will not be displayed again before the ignition has been switched off and then on again.

Reset washer fluid low message Saab 9-3

Leave a reply

How to reset washer fluid low message Saab 9-3 first generation.

Reset washer fluid low message Saab 9-3 first generation. From year: 1998, 1999, 2000, 2001, 2002.

  1. Switch ignition to ON position, one position befor you start the engine.
  2. The brake light failure warning light cannot be removed by pressing CLEAR button.
  3. To reset the message push the brake pedal to clear.

All information how to reset washer fluid low message on a Saab 9-3 it’s taken from Saab 9-3 owners manual.
Washer Saab 9-3. The reservoir holds 5 quarts (4.7 litres). When the SID message “WASHER FLUID LEVEL LOW” appears there is about 1.5 quarter (1.4 litres) left. Fill with quality washer fluid and follow the instructions on the package to reduce the risk of freezing. If the reservoir is run dry and the car has a rear-window wiper, then after refilling you cannot wash the rear window until you have first washed the windscreen.

Reset fill coolant fluid indicator Saab 9-3

Leave a reply

How to reset fill coolant fluid indicator Saab 9-3 first generation.

Reset fill coolant fluid indicator Saab 9-3 first generation. From year: 1998, 1999, 2000, 2001, 2002.

  1. Enter the key in the ignition and turn it until the lights on the dashboard go on, one position befor you start the vehicle.
  2. The fill coolant fluid indicator light cannot be removed by pressing CLEAR button.
  3. To reset this warning light push the brake pedal to clear.

Coolant Saab 9-3. The expansion tank is transparent, to facilitate checking. The level must be a little under the mark ”KALT – COLD” on the tank when the engine is cold. If the SID message “FILL COOLANT FLUID” is displayed, the level in the expansion tank should be checked. Top up as necessary with equal parts of clean water and coolant. Use only coolant approved by Saab. If the expansion tank is empty when coolant is added, run the engine to normal temperature and top up again, as necessary. All information how to reset fill coolant fluid indicator on a Saab 9-3 is taken from owners manual.

Coolant Saab 9-3. The cooling system is filled at the factory with coolant containing a 50% concentration of a combined antifreeze and corrosion inhibitor. A weaker mixture will result in reduced anticorrosion protection. For protection against freezing in very cold weather, a stronger concentration will be needed. A 60% concentration of antifreeze will provide protection at temperatures down to -58 F (-50°C). The corrosion-inhibiting properties of the coolant deteriorate over time, but coolant approved by Saab can be used for year-round protection. Change the coolant as specified in the service program (page 215) and use only coolant approved by Saab – other makes may need changing more frequently and may damage the system.