Tag Archives: reset service free

Service oil reset Nissan Cube

Leave a reply

2009-2010
Turn the ignition to run (one position before starting engine). The maintenance information (the wrench symbol and distance to change a maintenance item) comes on for about 5 seconds and then turns off.
Push the trip computer mode switch A for 3 seconds while the wrench symbol and maintenance information are displayed. The symbol and distance display will start flashing and the display shows the current interval (ie. 5000KM).
Push the switch A to increase the interval distance. Each step increases the interval by 1000km. The interval distance can be set up to 30000km after the display returns to 0.
If no further action is made, the display returns to the previous mode and the new interval is set. If the interval distance is set to 0, the display will skip the maintenance information when the ignition is placed in run or start mode.

Service oil reset Mitsubishi Lancer

Leave a reply

2008-2010
The “—” display can be reset while the ignition switch is “OFF”. When the display is reset, the time until the next periodic inspection is displayed and “PERIODIC INSPECTION” is no longer displayed when the ignition is switched from “OFF” to “ON”.
Lightly press the multi-information meter switch until the information screen switches to service reminder display screen.
Press and hold the multi-information meter switch for about 2 seconds or more to display the (wrench icon) and make it flash.
Lightly press the multi-information meter switch while the icon is flashing to change the display from “—” to “CLEAR”. After this, the time until the next periodic inspection will be displayed.
Start the engine to verify the indicator has been reset.

Service oil reset Mitsubishi Lancer Evolution

Leave a reply

How do you reset maintenance light, reset service light indicator Mitsubishi Lancer Evolution, year 2008, 2009, 2010. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Mitsubishi Lancer Evolution, oil reset instructions:

  • The “—” display can be reset while the ignition switch is “OFF”. When the display is reset, the time until the next periodic inspection is displayed and “PERIODIC INSPECTION” is no longer displayed when the ignition is switched from “OFF” to “ON”.
  • Lightly press the multi-information meter switch until the information screen switches to service reminder display screen.
  • Press and hold the multi-information meter switch for about 2 seconds or more to display the (wrench icon) and make it flash.
  • Lightly press the multi-information meter switch while the icon is flashing to change the display from “—” to “CLEAR”. After this, the time until the next periodic inspection will be displayed.
  • Start the engine to verify the indicator has been reset.

Service oil reset Mitsubishi Lancer Sportback

Leave a reply

2009-2010
The “—” display can be reset while the ignition switch is “OFF”. When the display is reset, the time until the next periodic inspection is displayed and “PERIODIC INSPECTION” is no longer displayed when the ignition is switched from “OFF” to “ON”.
Lightly press the multi-information meter switch until the information screen switches to service reminder display screen.
Press and hold the multi-information meter switch for about 2 seconds or more to display the (wrench icon) and make it flash.
Lightly press the multi-information meter switch while the icon is flashing to change the display from “—” to “CLEAR”. After this, the time until the next periodic inspection will be displayed.
Start the engine to verify the indicator has been reset.

Service oil reset Mitsubishi Outlander

Leave a reply

2007-2010
The “—” display can be reset while the ignition switch is “OFF”. When the display is reset, the time until the next periodic inspection is displayed and “PERIODIC INSPECTION” is no longer displayed when the ignition is switched from “OFF” to “ON”.
Lightly press the multi-information meter switch until the information screen switches to service reminder display screen.
Press and hold the multi-information meter switch for about 2 seconds or more to display the (wrench icon) and make it flash.
Lightly press the multi-information meter switch while the icon is flashing to change the display from “—” to “CLEAR”. After this, the time until the next periodic inspection will be displayed.
Start the engine to verify the indicator has been reset.