Tag Archives: warning light

Toyota Land Cruiser 100 series reset charging system warning light

Leave a reply

How to reset charging system warning light Toyota Land Cruiser 100 series.

Reset charging system warning light Toyota Land Cruiser 100 series. From year: 2002, 2003, 2004, 2005, 2006, 2007.

This warning light comes on when the ignition key is turned to the “ON” position, and goes off when the engine is started. When there are problems in the charging system while the engine is running, the warning light comes on.

When the charging system warning light comes on while the engine is running, malfunctions such as the engine drive belt being broken may have occurred. If the warning light comes on, immediately stop the vehicle in a safe place and contact your Toyota dealer. if the belt is broken the light will be reset after you change the belt, then the charging system warning light will go off.

That it is the full procedure how to reset charging system warning light Toyota Land Cruiser 100 series. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Toyota cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders by yourself.

Reset brake system warning light Toyota Land Cruiser 100 series

Leave a reply

How to reset brake system warning light Toyota Land Cruiser 100 series.

Reset brake system warning light Toyota Land Cruiser 100 series. From year: 2002, 2003, 2004, 2005, 2006, 2007.

This light comes on in the following cases when the ignition key is in the “ON” position.

When the parking brake is applied.

This light comes on for a few seconds when the ignition key is in the “ON” position even after the parking brake is released.

When the brake fluid level is low.

It is dangerous to continue driving normally when the brake fluid level is low.

When the hydraulic brake booster fails.

If the hydraulic booster causes an problem resulting in poor braking performance, the warning light comes on and buzzer sounds continuously.

Have your vehicle checked at your Toyota dealer in the following cases:

The light does not come on even if the parking brake is applied when the ignition key is in the “ON” position.
The light does not come on even if the ignition key is turned on with the parking brake released.
A warning light turning on briefly during operation does not indicate a problem.

If any of the following conditions occur, immediately stop your vehicle at a safe place and contact your Toyota dealer.

  • The light does not turn off even after the parking brake is released while the engine is running.
  • The warning buzzer comes on together with the warning light.
  • In either case, this can indicate that the brakes may not work properly and your stopping distance will become longer. Depress the brake pedal firmly and bring the vehicle to an immediate stop.

The brake system warning light remains on together with the “ABS” warning light.

In this case, not only the anti−lock brake system will fail but also the vehicle will become extremely unstable during braking.

Any of the following conditions may occur, but do not indicate a malfunction:

The light may stay on for about 60 seconds after the ignition key is turned to “ON” position. It is normal if it goes out after a while.

Depressing the brake pedal repeatedly may turn on the warning light and buzzer. It is normal if the light goes out and the buzzer stops sounding after a few seconds.

You may hear a small sound in the engine compartment after the engine is started or the brake pedal is depressed repeatedly. This is a pump pulsating sound of the brake system, and it is not a malfunction.

All information how can you reset brake system warning light is taken from Toyota Land Cruiser 100 series owners manual.

Reset tire pressure warning light Toyota FJ Cruiser

Leave a reply

How to reset tire pressure warning light Toyota FJ Cruiser.
Reset tire pressure warning light Toyota FJ Cruiser. From year: 2012, 2013, 2014.

How to initialize the tire pressure warning system.

  • Park the vehicle in safe place and turn the engine switch to the LOCK position. While the vehicle is moving, initialization is not performed.
  • Adjust the tire inflation pressure to the specified cold tire inflation pressure level. Make sure to adjust the tire pressure to the specified cold tire inflation pressure level. The tire pressure warning system will operate based on this pressure level.
  • Turn the engine switch to the ON position.
  • Press and hold the tire pressure warning reset switch until the tire pressure warning light blinks slowly 3 times.

Reset-tire-pressure-warning-light-Toyota-FJ-Cruiser

  • Wait for a few minutes with the engine switch on, and then turn the engine switch to the ACC or LOCK position.

The tire pressure warning valve and transmitter is equipped with a unique ID code. When replacing a tire pressure warning valve and transmitter, it is necessary to register the ID code of tire pressure warning valve and transmitter. Have the ID code registered by your Toyota dealer.

When to replace your Toyota FJ Cruiser tires.

Tires should be replaced if:

You have tire damage such as cuts, splits, cracks deep enough to expose the fabric or bulges indicating internal damage.
A tire goes flat repeatedly or cannot be properly repaired due to the size or location of a cut or other damage.
If you are not sure, consult with your Toyota dealer.

Replacing tires and wheels on your Toyota FJ Cruiser.

If the ID code of the tire pressure warning valve and transmitter is not registered, the tire pressure warning system will not work properly. After driving for about 20 minutes, the tire pressure warning light blinks for 1 minute and stays on to indicate a system malfunction.

Tire life.

Any tire over 6 years old must be checked by a qualified technician even if they have seldom or never been used or damage is not obvious.

If the tread wears down below 0.16 in. (4 mm) on snow tires.

The effectiveness of snow tires is lost.

How to check service light Toyota FJ Cruiser

Leave a reply

Checking service reminder indicators on a Toyota FJ Cruiser except the low fuel level warning light.

How to check service light Toyota FJ Cruiser. From year: 2007, 2008, 2009, 2010, 2011.

Apply the parking brake.

Open one of the side doors, back door or back window. The open door warning light should come on.
Close the door and back window. The open door warning light should go off.
Turn the ignition key to “ON”, but do not start the engine. All the service reminder indicators except the open door warning light should come on.
The following service reminder indicators go off after a few seconds:

  • Engine oil replacement reminder light.
  • ABS warning light.
  • VSC TRAC warning light.
  • AUTO LSD indicator light two−wheel drive models.
  • VSC OFF indicator light four−wheel drive models, and vehicles with rear differential lock.
  • Slip indicator light.
  • The SRS warning light goes off after about 6 seconds. There may be the case that the “ABS” warning light (brake assist system warning light), “VSC TRAC” warning light and “AUTO LSD” (two−wheel drive models), “VSC OFF” (four−wheel drive models, and vehicles with rear differential lock) or slip indicator light stay on for about 60 seconds after the ignition key is turned to the “ON” position. It is normal if they go out after a while.

If any service reminder indicator or warning buzzer does not function as described above, have it checked by your Toyota dealer as soon as possible.

All information how to check service light is taken from Toyota FJ Cruiser owners manual.

Reset charging system warning light Toyota FJ Cruiser

Leave a reply

How to reset charging system warning light Toyota FJ Cruiser.

Reset charging system warning light Toyota FJ Cruiser. From year: 2007, 2008, 2009, 2010, 2011.

This warning light comes on when the ignition key is turned to the “ON” position, and goes off when the engine is started. When there are problems in the charging system while the engine is running, the warning light comes on.

When the charging system warning light comes on while the engine is running, malfunctions such as the engine drive belt being broken may have occurred. If the warning light comes on, immediately stop the vehicle in a safe place and contact your Toyota dealer.

The charging system warning light can not be reset by using the buttons on the board this light can be reset by the Toyota dealer.