Tag Archives: screen

Reset service light oil life indicator dashboard Chrysler 300

How do you reset maintenance light, reset service light indicator Chrysler 300, year 2013, 2014, 2015. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Chrysler 300, year 2013, 2014, 2015 oil reset instructions:

  1. Turn the ignition to run (one position before starting engine).
  2. Push and release the DOWN arrow button to scroll downward through the main menu to “ Vehicle Info.”
  3. Push and release the RIGHT arrow button to access the ”Oil Life” screen.
  4. Push and hold the OK button until the “ Oil Life” screen displays.
  5. Push and release the DOWN arrow button to select “ Yes,” then push and release the OK button to select reset of the Oil Life.
  6. Push and release the Up arrow button to exit the submenu screen.
  7. Turn the ignition off and then start the vehicle to verify the indicator has been reset.

Reset oil service light indicator Fiat Ducato 3

How do you reset maintenance light, reset service light indicator Fiat Ducato 3. For reset maintenance light and that can be made manually by use button on car dash board. From year : 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014.

How to reset warning service light on a Fiat Ducato III.

Scheduled servicing ( service ) Fiat Ducato third generation.

Through this function it is possible to display information connected to proper vehicle servicing.

Proceed as follows:

  • Briefly press button MODE: service in km or mi, according to previous setting, will be displayed see paragraph “Units”.
  • Briefly press button MODE to go back to the menu screen or press the button for long to go back to the standard screen.

The “Service schedule” plans different service intervals according to engine models; service interval is displayed automatically, with the ignition key at MAR, starting from 2,000 km (or 1,240 mi) from this deadline and it is shown again every 200 km (or 124 mi). Oil change warning messages are displayed in the same way. Use buttons ▲ and ▼ to display alternately service schedule info and engine oil change info. Below 200 km servicing indications are displayed more frequently. Service indications will be displayed in km or mi according to previous unit setting. When a programmed maintenance interval (coupon) is near to come, turning the ignition key to MAR, the display will show the message “ Service ” followed by the number of km/mi to go before vehicle servicing. Contact a Fiat Dealership to carry out any service operation provided by the “Service schedule” and to reset the display.

Oil reset service light indicator Land Rover Freelander 2

How do you reset service light indicator Land Rover Freelander 2.
Reset service light indicator Land Rover Freelander 2. How to reset maintenance light, reset oil service light. Can be made manually by use button on car dash board.

Instructions:

  1. Hold the milage reset button in.
  2. Turn the ignition on to position 2.
  3. Keep the button held in and various different words will flash up on the little screen.
  4. Dont release until it goes back to reading the milage.
  5. Once this comes up release the button and it should be ok when you next cycle the ignition.

oil reset service light indicator Citroen C4

How do you reset service light indicator Citroen C4.

Reset service light indicator Citroen C4. From years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012.

  1. Switch off the ignition.
  2. Now turn the ignition to “S” for steering lock.
  3. Next press and hold the trip meter button.
  4. While holding the trip meter button start the ignition and continue to hold the trip meter button until the screen goes to “)” and the light goes off.
  5. Switch off the ignition, now the reseting of the light is complete.

Oil reset service light indicator Citroen C4 Grand Picasso

How do you reset service light indicator Citroen C4 Grand Picasso.

Reset service light indicator Citroen C4 Grand Picasso. From years: 2006, 2007, 2008, 2009, 2010, 2011, 2012.

  1. Switch off the ignition.
  2. Now turn the ignition to “S” for steering lock.
  3. Next press and hold the trip meter button.
  4. While holding the trip meter button start the ignition and continue to hold the trip meter button until the screen goes to “)” and the light goes off.
  5. Switch off the ignition, now the reseting of the light is complete.