Tag Archives: key

Oil reset service light indicator Skoda Superb B5 (3U)

Leave a reply

How to reset service light indicator Skoda Superb.

Reset service light indicator Skoda Superb B5 (3U). From year: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008.

  1. Get in the car, put the key in the ignition ensure that all doors are closed.
  2. Push and hold right button on the dashboard.
  3. Switch the ignition to on.
  4. Release, right button.
  5. Now turn in clockwise direction the button situated on the left of the dashboard.

That it is the full procedure how to reset service light indicator Skoda Superb B5 (3U). If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Skoda cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders by yourself.

Oil reset service light indicator Skoda Superb B5 (3U)

Leave a reply

How to reset service light indicator Skoda Superb.

Reset service light indicator Skoda Superb B5 (3U). From year: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008.

  1. Get in the car, put the key in the ignition ensure that all doors are closed.
  2. Push and hold right button on the dashboard.
  3. Switch the ignition to on.
  4. Release, right button.
  5. Now turn in clockwise direction the button situated on the left of the dashboard.

That it is the full procedure how to reset service light indicator Skoda Superb B5 (3U). If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Skoda cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders by yourself.

Toyota Land Cruiser 100 series reset SRS airbag warning light

Leave a reply

How to reset SRS airbag warning light Toyota Land Cruiser 100 series.

Reset SRS airbag warning light Toyota Land Cruiser 100 series. From year: 2002, 2003, 2004, 2005, 2006, 2007.

This indicator comes on when the ignition key is turned to the “ON” position. It goes off after about 6 seconds. This means the SRS airbags and seat belt pretensioners are operating properly.

The warning light system monitors the airbag sensor assembly, front airbag sensors, side and curtain shield airbag sensor assemblies, curtain shield airbag sensor assemblies, driver’s seat position sensor, driver’s seat belt buckle switch, front passenger occupant classification system and indicator light, front passenger’s seat belt buckle switch, seat belt pretensioner assemblies, inflators, roll sensing of curtain shield airbags off indicator light, interconnecting wiring and power sources.

If any of the following conditions occurs, this indicates a malfunction of the airbags or seat belt pretensioners. Contact your Toyota dealer as soon as possible.

  • The light does not come on when the ignition key is turned to the “ON” position or remains on for more than 6 seconds or flashes.
  • The light comes on or flashes while driving.

The SRS warning light will come on and front passenger occupant classification indicator light will indicate “OFF” if there is a malfunction in the front passenger occupant classification system.
All information how to reset SRS airbag warning light is taken from Toyota Land Cruiser 100 series owners manual.

Toyota Land Cruiser 100 series reset charging system warning light

Leave a reply

How to reset charging system warning light Toyota Land Cruiser 100 series.

Reset charging system warning light Toyota Land Cruiser 100 series. From year: 2002, 2003, 2004, 2005, 2006, 2007.

This warning light comes on when the ignition key is turned to the “ON” position, and goes off when the engine is started. When there are problems in the charging system while the engine is running, the warning light comes on.

When the charging system warning light comes on while the engine is running, malfunctions such as the engine drive belt being broken may have occurred. If the warning light comes on, immediately stop the vehicle in a safe place and contact your Toyota dealer. if the belt is broken the light will be reset after you change the belt, then the charging system warning light will go off.

That it is the full procedure how to reset charging system warning light Toyota Land Cruiser 100 series. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Toyota cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders by yourself.

Reset brake system warning light Toyota Land Cruiser 100 series

Leave a reply

How to reset brake system warning light Toyota Land Cruiser 100 series.

Reset brake system warning light Toyota Land Cruiser 100 series. From year: 2002, 2003, 2004, 2005, 2006, 2007.

This light comes on in the following cases when the ignition key is in the “ON” position.

When the parking brake is applied.

This light comes on for a few seconds when the ignition key is in the “ON” position even after the parking brake is released.

When the brake fluid level is low.

It is dangerous to continue driving normally when the brake fluid level is low.

When the hydraulic brake booster fails.

If the hydraulic booster causes an problem resulting in poor braking performance, the warning light comes on and buzzer sounds continuously.

Have your vehicle checked at your Toyota dealer in the following cases:

The light does not come on even if the parking brake is applied when the ignition key is in the “ON” position.
The light does not come on even if the ignition key is turned on with the parking brake released.
A warning light turning on briefly during operation does not indicate a problem.

If any of the following conditions occur, immediately stop your vehicle at a safe place and contact your Toyota dealer.

  • The light does not turn off even after the parking brake is released while the engine is running.
  • The warning buzzer comes on together with the warning light.
  • In either case, this can indicate that the brakes may not work properly and your stopping distance will become longer. Depress the brake pedal firmly and bring the vehicle to an immediate stop.

The brake system warning light remains on together with the “ABS” warning light.

In this case, not only the anti−lock brake system will fail but also the vehicle will become extremely unstable during braking.

Any of the following conditions may occur, but do not indicate a malfunction:

The light may stay on for about 60 seconds after the ignition key is turned to “ON” position. It is normal if it goes out after a while.

Depressing the brake pedal repeatedly may turn on the warning light and buzzer. It is normal if the light goes out and the buzzer stops sounding after a few seconds.

You may hear a small sound in the engine compartment after the engine is started or the brake pedal is depressed repeatedly. This is a pump pulsating sound of the brake system, and it is not a malfunction.

All information how can you reset brake system warning light is taken from Toyota Land Cruiser 100 series owners manual.