Tag Archives: How to reset

Oil reset service light Mitsubishi Lancer Evolution X

Leave a reply

How to reset oil service light Mitsubishi Lancer Evolution X.

Reset oil service light Mitsubishi Lancer Evolution X. From years: 2008, 2009, 2010.

  1. The “- – -” display can be reset while the ignition switch is “OFF”. When the display is reset, the time until the next periodic inspection is displayed and “PERIODIC INSPECTION” is no longer displayed when the ignition is switched from “OFF” to “ON”.
  2. Lightly press the multi-information meter switch until the information screen switches to service reminder display screen.
  3. Press and hold the multi-information meter switch for about 2 seconds or more to display the (wrench icon) and make it flash.
  4. Lightly press the multi-information meter switch while the icon is flashing to change the display from “- – – ” to “CLEAR”. After this, the time until the next periodic inspection will be displayed.
  5. Start the engine to verify the indicator has been reset.

Oil reset service light Mitsubishi Lancer Evolution 10

Leave a reply

How to reset oil service light Mitsubishi Lancer Evolution 10.

Reset oil service light Mitsubishi Lancer Evolution 10. From years: 2008, 2009, 2010.

  1. The “- – – -” display can be reset while the ignition switch is “OFF”. When the display is reset, the time until the next periodic inspection is displayed and “PERIODIC INSPECTION” is no longer displayed when the ignition is switched from “OFF” to “ON”.
  2. Lightly press the multi-information meter switch until the information screen switches to service reminder display screen.
  3. Press and hold the multi-information meter switch for about 2 seconds or more to display the (wrench icon) and make it flash.
  4. Lightly press the multi-information meter switch while the icon is flashing to change the display from “- – – – ” to “CLEAR”. After this, the time until the next periodic inspection will be displayed.
  5. Start the engine to verify the indicator has been reset.

Oil reset service light indicator Range Rover Sport

Leave a reply

How do you reset service light indicator Range Rover Sport. From year: 2007.

Reset service light indicator Range Rover Sport. How to reset maintenance light, reset oil service light. Can be made manually by use button on car dash board.

Instructions:

  1. Turn off the cars ignition.
  2. Hold down the reset button on the dash board to zero the mileage. keep it held in.
  3. Turn the cars ignition on, but do not start. Keep the button in for 5 seconds.
  4. A menu will come up, like date/mileage.
  5. Let go and then press the button again.
  6. It will toggle through some options, then get to rst.
  7. Press the button again, and your done.

Oil reset service light indicator Land Rover Freelander 2

Leave a reply

How do you reset service light indicator Land Rover Freelander 2.
Reset service light indicator Land Rover Freelander 2. How to reset maintenance light, reset oil service light. Can be made manually by use button on car dash board.

Instructions:

  1. Hold the milage reset button in.
  2. Turn the ignition on to position 2.
  3. Keep the button held in and various different words will flash up on the little screen.
  4. Dont release until it goes back to reading the milage.
  5. Once this comes up release the button and it should be ok when you next cycle the ignition.

Reset rear light failure Saab 9-3

Leave a reply

How to reset rear light failure Saab 9-3 first generation.

Reset rear light failure Saab 9-3 first generation. From year: 1998, 1999, 2000, 2001, 2002.

  1. Enter the key in the ignition and turn it until the lights on the dashboard go on, one position befor you start the car.
  2. The rear light failure indicator light cannot be removed by pressing CLEAR button.
  3. To reset the light push the brake pedal to clear.

CHECK messages on a Saab 9-3 first generation. When the engine is started, CHECKING will appear on the display for about 4 seconds, while the SID checks are being performed. When a CHECK indicator is generated while the vehicle is being driven, a chime will sound, INFO DISPL will illuminate on the main instrument panel, and the message will appear on the SID. The number of messages that can be displayed by the SID varies with the specification of the car. If more than one CHECK indicator has been generated, the + symbol will appear to the left of the text on the display. The indicator appear in order of priority. If a new fault occurs while another message is being displayed, the message relating to the new one will appear for 10 seconds, after which the display will return to the earlier one. Press CLR once to acknowledge a message, hereupon it will be cleared from the display. It will not be displayed again before the ignition has been switched off and then on again.