Oil service reset maintenance oil light reset Ford F-150, 2014

Leave a reply

How do you reset maintenance light, reset service light indicator Ford F-150, year 2014. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Ford F-150, oil reset instructions:

  1.  Turn the ignition on (do not start the engine).
  2.  Press and release the SETUP button to display “OIL LIFE XXX% HOLD RESET = NEW”.
  3.  Press and hold the RESET button for two seconds and release to reset the oil life to 100%.
  4.  Turn the ignition off and then start the engine to verify the indicator has been reset.

Reset oil service light Rover 75

Leave a reply

How to reset oil service light Rover 75.
Reset oil service light Rover 75. From year: 1999, 2000, 2001, 2002, 2003, 2004, 2005.

The procedure how to reset all the requested warning lights on Rover 75 is to do the following.

  • Get a wire.
  • Switch ignition to ON.
  • Short Pin 8 and Pin 4 on the OBD connector for 4 seconds to reset oil light, 8, 25 seconds for the other 2 lights and this will reset the 15000 service request for oil change.

Quick and easy and not legal if you do it without actually doing the service.

That it is the full procedure how to reset oil service light Rover 75. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Rover cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders by yourself.

Oil reset service light indicator Rover 75

Leave a reply

How do you reset maintenance light, reset service light indicator Rover 75. For reset maintenance light and that can be made manually by use button on car dash board. From year: 1999, 2000, 2001, 2002, 2003, 2004, 2005.

How to reset warning service light on a Fiat Rover 75.

  • There are 3 stages.
  • Locate the obd plug and find pin 8 then.
  • Switch ignition to pos 2.
  • With a fused wire, a piece of wire with a fuse in it.
  • Ground pin 8 for 4, 5 seconds.
  • Switch OFF the ignition.

Repeat this procedure 2 more times but for 8, 12 seconds and then the service light indicator will be reset.

That it is the full procedure how to reset service light indicator Rover 75. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Rover cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders by yourself.

Reset oil service light indicator Fiat Ducato 3

Leave a reply

How do you reset maintenance light, reset service light indicator Fiat Ducato 3. For reset maintenance light and that can be made manually by use button on car dash board. From year : 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014.

How to reset warning service light on a Fiat Ducato III.

Scheduled servicing ( service ) Fiat Ducato third generation.

Through this function it is possible to display information connected to proper vehicle servicing.

Proceed as follows:

  • Briefly press button MODE: service in km or mi, according to previous setting, will be displayed see paragraph “Units”.
  • Briefly press button MODE to go back to the menu screen or press the button for long to go back to the standard screen.

The “Service schedule” plans different service intervals according to engine models; service interval is displayed automatically, with the ignition key at MAR, starting from 2,000 km (or 1,240 mi) from this deadline and it is shown again every 200 km (or 124 mi). Oil change warning messages are displayed in the same way. Use buttons ▲ and ▼ to display alternately service schedule info and engine oil change info. Below 200 km servicing indications are displayed more frequently. Service indications will be displayed in km or mi according to previous unit setting. When a programmed maintenance interval (coupon) is near to come, turning the ignition key to MAR, the display will show the message “ Service ” followed by the number of km/mi to go before vehicle servicing. Contact a Fiat Dealership to carry out any service operation provided by the “Service schedule” and to reset the display.

Fiat Ducato 3 reset trip computer

Leave a reply

How to reset trip computer on a Fiat Ducato III.

Reset trip computer Fiat Ducato 3. From year : 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014.

The “trip computer” displays information (with ignition key at MAR), relating to the operating status of the vehicle. This function comprises two separate and independent trips: “Trip A” and “Trip B” concerning the “complete mission” of the vehicle (journey).

Both functions are resettable, reset – start of new mission.

“Trip A” shall be used to display the figures relating to:

External temperature.
Range.
Trip distance.
Average consumption.
Instant consumption.
Average speed.
Travel time (driving time).
“Trip B”, available on multifunction display only, shall be used to display the figures relating to:

Trip distance B.
Average consumption B.
Average speed B.
Travel time B (driving time).
“Trip B” function can be excluded (see paragraph “Trip B On/Off”). “Range” and “Instant consumption” cannot be reset.

Values displayed Fiat Ducato 3 third generation.

External temperature.

It indicates the external temperature of the driver compartment.

Range.

This value shows the distance in km (or mi) that the vehicle can still cover before needing fuel, assuming that driving conditions are kept unvaried. The display will show “—-” in the following cases:

value lower than 50 km (or 30 mi).
vehicle left parked with engine running for long.
Trip distance Fiat Ducato 3. This value shows the distance covered from the start of the new mission.

Average consumption Fiat Ducato 3. This value shows the average consumption from the start of the new mission.

Instant consumption Fiat Ducato 3. This value shows instant fuel consumption (this value is updated second by second). If parking the vehicle with engine on, the display will show “—-”.

Average speed Fiat Ducato III. This value shows the vehicle average speed as a function of the overall time elapsed since the start of the new mission.

Travel time Fiat Ducato III. This value shows the time elapsed since the start of the new mission.

IMPORTANT Lacking information, Trip computer values are displayed with “—-”. When normal operating condition is reset, calculation of different units will restart regularly. Values displayed before the failure will not be reset.

Button TRIP, set on the top of the right steering column stalk, shall be used (with ignition key at MAR) to display and to reset the previously described values to start a new mission:

short push to display the different vaues.
long push to reset and then start a new mission.
New mission Fiat Ducato 3.

Reset can be:

“manual” resetting by the user, by pressing the relevant button;
“automatic” resetting, when the “Trip distance” reaches 3999,9 km or 9999,9 km or when the “Travel time” reaches 99.59 (99 hours and 59 minutes);
after disconnecting/reconnecting the battery.
IMPORTANT The reset operation in the presence of the screens concerning the “Trip A” makes it possible to reset only the information associated with this function.

IMPORTANT The reset operation in the presence of the screens concerning the “Trip B” makes it possible to reset only the information associated with this function.

Start of journey procedure. With ignition key at MAR, press and keep button TRIP pressed for over 2 seconds to reset.

Exit Trip – to quit the Trip function: keep button MODE pressed for over 2 seconds.