Tag Archives: warning light

Reset electric power steering system warning light Toyota Yaris

Leave a reply

How to reset electric power steering system warning light Toyota Yaris 2 generation.

Reset electric power steering system warning light Toyota Yaris second generation. From year: 2005, 2006, 2007, 2008, 2009, 2010, 2011.

The light comes on when the ignition key is turned to the “ON” position. If the electric power steering system warning light works properly, the light turns off after a few seconds. If the system has malfunctions, the light comes on again.

If the following conditions occur, this indicates a malfunction somewhere in the parts monitored by the warning light system. Contact your Toyota dealer as soon as possible to service the vehicle.

The light does not come on when the ignition key is turned to the “ON” position or remains on.

The light stays on while you are driving.

The warning light turning on while racing the engine for a long time may not indicate malfunction. To turn off the light, restart the engine and start driving.

If the electric power steering system warning light comes on, take your vehicle to Toyota dealer as soon as possible. In this case, more effort is required for the steering wheel to turn than usual. Drive your vehicle while firmly gripping the steering wheel.

All information how can you reset electric power steering system warning light is taken from Toyota Yaris owners manual.

Reset SRS airbag warning light Toyota Yaris second generation

Leave a reply

How to reset SRS airbag warning light Toyota Yaris 2 generation.

Reset SRS airbag warning light Toyota Yaris second generation. From year: 2005, 2006, 2007, 2008, 2009, 2010, 2011.

This light will come on when the ignition key is turned to the “ON” position. After about 6 seconds, the light will go off. This means the system of the airbags and front seat belt pretensioners are operating properly.

The warning light system monitors the airbag sensor assembly, front airbag sensors, side and curtain shield airbag sensors, curtain shield airbag sensors, driver’s seat position sensor, driver’s seat belt buckle switch, front passenger occupant classification system, “AIRBAG ON” indicator light, “AIRBAG OFF” indicator light, front passenger’s seat belt buckle switch, seat belt pretensioner assemblies, inflators, interconnecting wiring and power sources.

If either of the following conditions occurs, this indicates a malfunction somewhere in the parts monitored by the warning light system. Contact your Toyota dealer as soon as possible to service the vehicle.

The light does not come on when the ignition key is turned to the “ON” position or remains on for more than 6 seconds or flashes.
The light comes on or starts flashing while driving.
All information how can you reset SRS aibar light is taken from Toyota Yaris second generation owners manual.

Reset charging system warning light Toyota Tundra 2 generation

Leave a reply

How to reset charging system warning light Toyota Tundra second generation.

Reset charging system warning light Toyota Tundra 2 generation. From year: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014.

This warning light comes on when the ignition switch is turned to the “ON” position, and goes off when the engine is started. When there are problems in the charging system while the engine is running, the warning light comes on.

When the charging system warning light comes on while the engine is running, malfunctions such as the engine drive belt being broken may have occurred. If the warning light comes on, immediately stop the vehicle in a safe place and contact your Toyota dealer.

All information how to reset charging system warning light is taken from Toyota Tundra 2 generation owners manual.

That it is the full procedure how to reset charging system warning light Toyota Tundra 2 generation. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Toyota cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders by yourself.

Reset low engine oil pressure warning light Toyota Tundra

Leave a reply

How to reset low engine oil pressure warning light Toyota Tundra 2 generation.

Reset low engine oil pressure warning light Toyota Tundra second generation. From year: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014.

This light warns that the engine oil pressure is too low.

If it flickers or stays on while you are driving, pull off the road to a safe place and stop the engine immediately. Call a Toyota dealer or qualified repair shop for assistance.

The light may occasionally flicker when the engine is idling or it may come on briefly after a hard stop. There is no cause for concern if it then goes out when the engine is accelerated slightly.

The light may come on when the oil level is extremely low. It is not designed to indicate low oil level, and the oil level must be checked using the level dipstick. To reset the low engine oil pressure warning light on a Toyota Tundra you must add some engine oil and the indicator will go off.

Do not drive the vehicle with the warning light on—even for one block. It may ruin the engine.

All information how to reset low engine oil pressure warning light is taken from Toyota Tundra 2 generation owners manual.

Reset malfunction indicator lamp Toyota Tundra second generation

Leave a reply

How to reset malfunction indicator lamp Toyota Tundra 2 generation.

Reset malfunction indicator lamp Toyota Tundra second generation. From year: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014.

This lamp comes on when the ignition key is turned to the “ON” position and goes off after the engine starts. This means that the warning light system is operating properly. If the lamp remains on, or the lamp comes on while driving, first check the followings.

Empty fuel tank. If the fuel tank is empty, refuel immediately.
Loose fuel tank cap. If the fuel tank cap is loose, securely tighten it.
These cases are temporary malfunctions. The malfunction indicator lamp will go off after taking several driving trips. If the lamp does not go off even after several trips, contact your Toyota dealer as soon as possible.

If the fuel tank is not empty or the fuel tank cap is not loose.

There is a problem somewhere in the engine, emission control system, electronic throttle control system, automatic transmission electrical system or warning light system itself.

Contact your Toyota dealer as soon as possible to service the vehicle. If engine speed does not increase when the accelerator pedal is depressed, there may be a problem somewhere in the electronic throttle control system. At this time, vibration may occur. However, if you depress the accelerator pedal more firmly and slowly, you can drive your vehicle at low speeds. Have your vehicle checked by your Toyota dealer as soon as possible. Even if the abnormality of the electronic throttle control system is corrected during low speed driving, the system may not be recovered until the engine is stopped and the ignition key is turned to “ACC” or “LOCK” position.

Be especially careful to prevent erroneous pedal operation.

Emissions Inspection and Maintenance (I/M) programs.

Your vehicle may not pass a state emission inspection if the malfunction indicator lamp remains on. Contact your Toyota dealer to check your vehicle’s emission control system and OBD (On−Board Diagnostics) system before taking your vehicle for the inspection.

All information how can you reset malfunction indicator lamp is taken from Toyota Tundra second generation owners manual.