Tag Archives: warning light

Reset malfunction indicator warning light Toyota Avalon

Leave a reply

How to reset malfunction indicator warning light Toyota Avalon 3 generation.

Reset malfunction indicator warning light Toyota Avalon third generation. From year: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012.

This lamp comes on when the ignition switch is set at ON and goes off after the engine starts. This means that the warning light system is operating properly.

If the lamp remains on, or the lamp comes on while driving, first check the followings.

Empty fuel tank. If the fuel tank is empty, refuel immediately.
Loose fuel tank cap. If the fuel tank cap is loose, securely tighten it.
These cases are temporary malfunctions. The malfunction indicator lamp will go off after taking several driving trips.

If the lamp does not go off even after several trips, contact your Toyota dealer as soon as possible.

If the fuel tank is not empty or the fuel tank cap is not loose.

There is a problem somewhere in the engine, emission control system, electronic throttle control system, automatic transmission electrical system or warning light system itself.
Contact your Toyota dealer as soon as possible to service the vehicle.

If engine speed does not increase when the accelerator pedal is depressed, there may be a problem somewhere in the electronic throttle control system.
At this time, vibration may occur. However, if you depress the accelerator pedal more firmly and slowly, you can drive your vehicle at low speeds. Have your vehicle checked by your Toyota dealer as soon as possible.

Even if the abnormality of the electronic throttle control system is corrected during low speed driving, the system may not be recovered until the engine is stopped and the engine off.

Reset low engine oil pressure warning light Toyota Avalon

Leave a reply

How to reset low engine oil pressure warning light Toyota Avalon 3 generation.

Reset low engine oil pressure warning light Toyota Avalon third generation. From year: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012.

This light warns that the engine oil pressure is too low.

If it flickers or stays on while you are driving, pull off the road to a safe place and stop the engine immediately. Call a Toyota dealer or qualified repair shop for assistance. The light may occasionally flicker when the engine is idling or it may come on briefly after a hard stop. There is no cause for concern if it then goes out when the engine is accelerated slightly. The light may come on when the oil level is extremely low. It is not designed to indicate low oil level, and the oil level must be checked using the level dipstick.

Do not drive the vehicle with the warning light on-even for one block. It may ruin the engine.
All information how can tou reset low engine oil pressure warning light is taken from Toyota Avalon owners manual.

Reset charging system warning light Toyota Avalon 3 generation

Leave a reply

How to reset charging system warning light Toyota Avalon third generation.

Reset charging system warning light Toyota Avalon 3 generation. From year: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012.

This warning light comes on when the ignition switch is set at ON, and goes off when the engine is started. When there are problems in the charging system while the engine is running, the warning light comes on.

When the charging system warning light comes on while the engine is running, malfunctions such as the engine drive belt being broken may have occurred. If the warning light comes on, immediately stop the vehicle in a safe place and contact your Toyota dealer.

All information how can you reset charging system warning light is taken from Toyota Avalon 3 generation owners manual.

That it is the full procedure how to reset charging system warning light Toyota Avalon 3 generation. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Toyota cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders by yourself.

Reset ABS warning light Toyota Yaris second generation

Leave a reply

How to reset ABS warning light Toyota Yaris 2 generation.

Reset ABS warning light Toyota Yaris second generation. From year: 2005, 2006, 2007, 2008, 2009, 2010, 2011.

The light comes on when the ignition key is turned to the “ON” position. If the antilock brake system works properly, the light turns off after a few seconds. Thereafter, if the system malfunctions, the light comes on again. When the “ABS” warning light is on (and the brake system warning light is off), the anti−lock brake system does not operate, but the brake system still operates conventionally.

When the “ABS” warning light is on (and the brake system warning light is off), the anti−lock brake system does not operate so that the wheels could lock up during a sudden braking or braking on slippery road surfaces. If either of the following conditions occurs, this indicates a malfunction somewhere in the parts monitored by the warning light system. Contact your Toyota dealer as soon as possible to service the vehicle.

The light does not come on when the ignition key is turned to the “ON” position or remains on.
The light comes on while you are driving.
A warning light turning on briefly during operation does not indicate a problem.

If the “ABS” warning light remains on together with the brake system warning light, immediately stop your vehicle at a safe place and contact your Toyota dealer. In this case, not only the anti−lock brake system will fail but also the vehicle will become extremely unstable during braking.

Reset open door warning light Toyota Yaris second generation

Leave a reply

How to reset open door warning light Toyota Yaris 2 generation.

Reset open door warning light Toyota Yaris second generation. From year: 2005, 2006, 2007, 2008, 2009, 2010, 2011.

Open Door Warning Light for vehicles without tachometer.

This light remains on until all the side doors and trunk are completely closed.

Door indicator light vehicles with tachometer.

This light remains on until all the doors and trunk are completely closed. The light consists of a base light (shape of the vehicle) and 5 separate lights. Each light indicates which door is open.

To turn off the open door warning light you must make sure that all doors are closed, if the indicator is still open it is possible that one of the sensors to be faulty.