Tag Archives: warning light

Reset open door warning light Toyota FJ Cruiser

Leave a reply

How to reset open door warning light Toyota FJ Cruiser.

Reset open door warning light Toyota FJ Cruiser. From year: 2007, 2008, 2009, 2010, 2011.

This light remains on until all the side doors, back door and back window are completely closed.

To reset the open door warning light on a Toyota FJ Cruiser you must stop the car and close all doors. If the warning light don’t stop it means that at one door sensor is broken. Before starting check the doors and trunk are closed properly and no seatbelt is caught in doors.

Reset SRS airbag warning light Toyota FJ Cruiser

Leave a reply

Reset SRS airbag warning light Toyota FJ Cruiser. From year: 2007, 2008, 2009, 2010, 2011.

How to reset SRS airbag warning light Toyota FJ Cruiser.

This indicator comes on when the ignition key is turned to the “ON” position. It goes off after about 6 seconds. This means the SRS airbags and seat belt pretensioners are operating properly.

This warning light system monitors the airbag sensor assembly, front airbag sensors, side and curtain shield airbag sensors, curtain shield airbag sensors, driver’s seat position sensor, driver’s seat belt buckle switch, front passenger occupant classification system∗ and indicator light, seat belt pretensioner assemblies, inflators, interconnecting wiring and power sources. The front passenger occupant classification system includes the front passenger occupant classification ECU, load sensor and front passenger’s seat belt buckle switch.

If either of the following conditions occurs, this indicates a malfunction somewhere in the parts monitored by the warning light system. Contact your Toyota dealer as soon as possible to service the vehicle.

The light does not come on when the ignition key is turned to the “ON” position or remains on for more than 6 seconds.
The light comes on while driving.
The SRS warning light will come on and front passenger occupant classification indicator light will indicate “OFF” if there is a malfunction in the front passenger occupant classification system.

Reset automatic transmission fluid temperature warning light Toyota FJ Cruiser

Leave a reply

How to reset automatic transmission fluid temperature warning light Toyota FJ Cruiser.

Reset automatic transmission fluid temperature warning light Toyota FJ Cruiser four−wheel drive models. From year: 2007, 2008, 2009, 2010, 2011.

This light warns that the automatic transmission fluid temperature is too high.

If this light comes on while you are driving, slow down and pull off the road. To reset the automatic transmission fluid temperature warning light on your Toyota FJ Cruiser you must follow this instruction : stop the vehicle at a safe place and put the selector lever in “P”. With the engine idling, wait until the light goes off. If the light goes off, you may start the vehicle again. If the light does not go off, call a Toyota dealer or qualified repair shop for assistance.

Reset ABS warning light Toyota Avalon third generation

Leave a reply

How to reset ABS warning light Toyota Avalon 3 generation.

Reset ABS warning light Toyota Avalon third generation. From year: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012.

Vehicles without vehicle stability control system.

The light comes on with the ignition switch is set at ON. If the anti−lock brake system works properly, the light turns off after a few seconds. Thereafter, if the system malfunctions, the light comes on again. When the “ABS” warning light is on (and the brake system warning light is off), the anti−lock brake system does not operate, but the brake system still operates conventionally. When the “ABS” warning light is on (and the brake system warning light is off), the anti−lock brake system does not operate so that the wheels could lock up during a sudden braking or braking on slippery road surfaces.

If either of the following conditions occurs, this indicates a malfunction somewhere in the components monitored by the warning light system. Contact your Toyota dealer as soon as possible to service the vehicle.

The light does not come on when the ignition switch is set at ON or remains on.
The light comes on while you are driving.
A warning light turning on briefly during operation does not indicate a problem.

If the “ABS” warning light remains on together with the brake system warning light, immediately stop your vehicle at a safe place and contact your Toyota dealer.

In this case, not only the anti−lock brake system will fail but also the vehicle will become extremely unstable during braking.

Vehicles with vehicle stability control system.
The light comes on when the ignition switch is set at ON. If the anti−lock brake system and the brake assist system work properly, the light turns off after a few seconds. Thereafter, if the system malfunctions, the light comes on again. When the “ABS” warning light is on (and the brake system warning light is off), the anti−lock brake system and the brake assist system do not operate, but the brake system still operates conventionally. When the “ABS” warning light is on (and the brake system warning light is off), the anti−lock brake system does not operate so that the wheels could lock up during a sudden braking or braking on slippery road surfaces.

If either of the following conditions occurs, this indicates a malfunction somewhere in the components monitored by the warning light system. Contact your Toyota dealer as soon as possible to service the vehicle.

The light does not come on when the ignition switch is set at ON or remains on.
The light comes on while you are driving.
A warning light turning on briefly during operation does not indicate a problem.

If the “ABS” warning light remains on together with the brake system warning light, immediately stop your vehicle at a safe place and contact your Toyota dealer. In this case, not only the anti−lock brake system will fail but also the vehicle will become extremely unstable during braking.

All information how can you reset ABS warning light is taken from Toyota Avalon third generation owners manual.

Reset low fuel level warning light Toyota Avalon 3 generation

Leave a reply

How to reset low fuel level warning light Toyota Avalon third generation.

Reset low fuel level warning light Toyota Avalon 3 generation. From year: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012.


This light comes on when the fuel level in the tank becomes nearly empty. Fill up the tank as soon as possible. On inclines or curves, due to the movement of fuel in the tank, the low fuel level warning light may come on earlier than usual.

In case the light does not go out you have problems with the probe “litrometrica”.

All information how can you reset low fuel level warning light is taken from Toyota Avalon 3 generation owners manual.
That it is the full procedure how to reset low fuel level warning light Toyota Avalon 3 generation. If you like to reset any maintenance oil light after an oil change. Or reset check engine light, airbag light, inspection key or insp errors when maint reqd, for Toyota cars. Or any warning light for service reminder which appears on the display. Write in the search box the car name for which you want to find information, and find how to reset other service reminders by yourself.