Tag Archives: vehicle

Toyota Land Cruiser 100 series Reset unengaged park warning light

Leave a reply

How to reset unengaged park warning light Toyota Land Cruiser 100 series.

Reset unengaged park warning light Toyota Land Cruiser 100 series. From year: 2002, 2003, 2004, 2005, 2006, 2007.

This light warns that the transmission “Park” mechanism is not engaged. If the four−wheel drive control is in the “N” position while the selector lever is in the “P” position, the transmission will disengage and the wheels will not lock.

To restore the park function, shift the four−wheel drive control out of “N”, or the vehicle can move.

All information how to restore the unengaged park warning light is taken from Toyota Land Cruiser 100 series owners manual.

Reset tire pressure warning light Toyota Land Cruiser 100 series

Leave a reply

How to reset tire pressure warning light Toyota Land Cruiser 100 series.

Reset tire pressure warning light Toyota Land Cruiser 100 series. From year: 2002, 2003, 2004, 2005, 2006, 2007.

This light comes on when the ignition key is turned to the “ON” position. If the tire pressure warning system works properly and tire inflation pressure is appropriate, the light goes off after a few seconds. This light comes on or flashes in the folowing cases when the ignition key is turned to the “ON” position.

When the low tire inflation pressure is detected while driving.

If any tire has low inflation pressure, the light comes on.

The light goes off after the tire inflation pressure is adjusted to a specified level.

When initializing the system.

If initialization is completed, the light blinks three times.

When the system malfunctions.

If the system malfunctions, the light blinks. Although it is no problem to continue driving, have your vehicle checked by your Toyota dealer as soon as possible.

All information how to reset tire pressure warning light is taken from Toyota Land Cruiser 100 series owners manual.

Reset ABS warning light Toyota Land Cruiser 100 series

Leave a reply

How to reset ABS warning light Toyota Land Cruiser 100 series.

Reset ABS warning light Toyota Land Cruiser 100 series. From year: 2002, 2003, 2004, 2005, 2006, 2007.

The light comes on when the ignition key is turned to the “ON” position. If the anti−lock brake system and the brake assist system work properly, the light turns off after a few seconds. Thereafter, if either of the systems malfunctions, the light comes on again.

When the “ABS” warning light is on (and the brake system warning light is off), the anti−lock brake system, the brake assist system, the vehicle stability control system and/or active traction control system do/does not operate, but the brake system still operates conventionally. When the “ABS” warning light is on (and the brake system warning light is off), the anti−lock brake system does not operate so that the wheels could lock up during a sudden braking or braking on slippery road surfaces.

If either of the following conditions occurs, this indicates a malfunction somewhere in the components monitored by the warning light system. Contact your Toyota dealer as soon as possible to service the vehicle.

  • The light does not come on when the ignition key is turned to the “ON” position, or remains on.
  • The light comes on while you are driving.
  • A warning light turning on briefly during operation does not indicate a problem.

If the “ABS” warning light remains on together with the brake system warning light, immediately stop your vehicle at a safe place and contact your Toyota dealer.

Oil reset service light indicator Chevrolet Malibu

Leave a reply

How do you reset oil service light Chevrolet Malibu. From years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012.

Reset oil service light Chevrolet Malibu.

The Engine Oil Life System calculates when to change the engine oil and filter based on vehicle use. Whenever the oil is changed, reset the system so it can calculate when the next oil change is required. If a situation accurs where you change the oil prior to a CHANGE OIL SOON message being turned on, reset the system.

To reset oil service light on your vehicle Chevrolet Malibu follow this steps:

  • Display OIL LIFE RESET on the dash board.
  • Press and hold the INFO button & ENTER button (in the same time) buttons for at least one second.
  • OIL LIFE RESET will display.
  • Hit ENTER button again and an ACKNOWLEDGED display message will appear for three seconds.
  • This tells you the system has been reset.
  • Turn the key to LOCK/OFF.

If the CHANGE OIL SOON message comes back on when the vehicle is started, the engine oil life system has not reset. Repeat the procedure.

Oil reset service light indicator Chevrolet Impala

Leave a reply

How do you reset oil service light Chevrolet Impala. From years: 1999 – 2012.

Reset oil service light Chevrolet Impala. From years: 1999, 2000, 2001, 2002, 2003, 2004, 2005.

The GM Oil Life System calculates when to change your engine oil and filter based on vehicle use. Anytime your oil is changed, reset the system so it can calculate when the next oil change is required. If a situation occurs where you change your oil prior to a CHNAGE ENGINE OIL message being turned on, reset the system.

After changing the engine oil, the system must be reset.

To reset the CHANGE ENGINE OIL message use one of the folloqing procedures.

Reset oil service light Chevrolet Impala, using the radio. From years: 1999, 2000, 2001, 2002, 2003, 2004, 2005.

  • Turn the ignition to ACC or ON, with the radio off.
  • Press and hold the TUNE DISP knob on the radio for at least five seconds until SETTINGS is displayed.
  • Press the SEEK PSCAN up or down arrow to scroll through the main menu.
  • Scroll until OIL LIFE appears on the display.
  • Press the 1 PREV or 2 NEXT buttons to enter the submenu. Reset will be displayed.
  • Press the TUNE DISP knob to reset. A chime will be heard to verify the new setting and DONE will be displayed for one second.
  • Once the indicator has been reset, scroll until EXIT appears on the display.
  • Press the TUNE DISP knob to exit programming. A chime will be heard to verify the exit.
  • Turn the key to OFF.
  • If the CHANGE ENGINE OIL message comes back on when you start your vehicle, the engine oil life system has not reset. Repeat the procedure.

Reset oil service light Chevrolet Impala, using the accelerator pedal. From years: 1999, 2000, 2001, 2002, 2003, 2004, 2005.

  • Turn the ignition to ON, with the engine off.
  • Fully press and release the accelerator pedal slowly three times within five seconds. If the CHANGE ENGINE OIL message flashes, the system is reset.
  • However, if it stays on, it did not reset. Repeat the procedure.
  • Turn the key to OFF.
  • If the CHANGE ENGINE OIL message comes back on when you start your vehicle, the engine oil life system has not reset. Repeat the procedure.

All information is taken from the Chevrolet Impala manual.

How to reset oil service light Chevrolet Impala. From years: 2006, 2007, 2008, 2009, 2010, 2011, 2012.

How to Reset the Engine Oil Life System Chevrolet Impala.

The Engine Oil Life System calculates when to change your engine oil and filter based on vehicle use. Anytime your oil is changed, reset the system so it can calculate when the next oil change is required. If a situation occurs where you
change your oil prior to a CHANGE ENGINE OIL SOON message being turned on, reset the system.

Always reset the engine oil life to 100% after every oil change. It will not reset itself. To reset the Engine Oil Life System for Chevrolet impala, do the following:

  • Display the OIL LIFE REMAINING on the DIC.
  • Press and hold the SET/RESET button on the DIC for more than five seconds. The oil life will change to 100%.
  • If the CHANGE ENGINE OIL SOON message comes back on when you start your vehicle, the Engine Oil Life System has not reset. Repeat the procedure.

All information is taken from the Chevrolet Impala manual.