Tag Archives: time

Reset service light oil life indicator dashboard Ford Fiesta

Leave a reply

How do you reset maintenance light, reset service light indicator Ford Fiesta, year 2014, 2015. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Ford Fiesta, year 2014, 2015 oil reset instructions:

  1. Turn the ignition to run.
    *one position before starting engine
  2. Press the brake and gas pedals at the same time; after 3 seconds the “Service: Oil reset in prog.” message will appear and after 25 seconds the “Service: Oil reset complete” message will appear.
  3. Release the brake and gas pedals.
  4. Turn the ignition off and then start the engine to verify the indicator has been reset.

Reset oil service light Ford C-MAX 2014

Leave a reply

How do you reset maintenance light indicator, reset service light indicator Ford C-MAX, year 2014, 2015. For reset maintenance light and that can be made manually by use button on car dash board.

  1. Turn the ignition to run (one position before starting engine).
  2. Press the brake and gas pedals at the same time; after 3 seconds the “Service: Oil reset in prog.” message will appear and after 25 seconds the “Service: Oil reset complete” message will appear.
  3. Release the brake and gas pedals.
  4. Turn the ignition off and then start the engine to verify the indicator has been reset.

Fiat Ducato 3 reset trip computer

Leave a reply

How to reset trip computer on a Fiat Ducato III.

Reset trip computer Fiat Ducato 3. From year : 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014.

The “trip computer” displays information (with ignition key at MAR), relating to the operating status of the vehicle. This function comprises two separate and independent trips: “Trip A” and “Trip B” concerning the “complete mission” of the vehicle (journey).

Both functions are resettable, reset – start of new mission.

“Trip A” shall be used to display the figures relating to:

External temperature.
Range.
Trip distance.
Average consumption.
Instant consumption.
Average speed.
Travel time (driving time).
“Trip B”, available on multifunction display only, shall be used to display the figures relating to:

Trip distance B.
Average consumption B.
Average speed B.
Travel time B (driving time).
“Trip B” function can be excluded (see paragraph “Trip B On/Off”). “Range” and “Instant consumption” cannot be reset.

Values displayed Fiat Ducato 3 third generation.

External temperature.

It indicates the external temperature of the driver compartment.

Range.

This value shows the distance in km (or mi) that the vehicle can still cover before needing fuel, assuming that driving conditions are kept unvaried. The display will show “—-” in the following cases:

value lower than 50 km (or 30 mi).
vehicle left parked with engine running for long.
Trip distance Fiat Ducato 3. This value shows the distance covered from the start of the new mission.

Average consumption Fiat Ducato 3. This value shows the average consumption from the start of the new mission.

Instant consumption Fiat Ducato 3. This value shows instant fuel consumption (this value is updated second by second). If parking the vehicle with engine on, the display will show “—-”.

Average speed Fiat Ducato III. This value shows the vehicle average speed as a function of the overall time elapsed since the start of the new mission.

Travel time Fiat Ducato III. This value shows the time elapsed since the start of the new mission.

IMPORTANT Lacking information, Trip computer values are displayed with “—-”. When normal operating condition is reset, calculation of different units will restart regularly. Values displayed before the failure will not be reset.

Button TRIP, set on the top of the right steering column stalk, shall be used (with ignition key at MAR) to display and to reset the previously described values to start a new mission:

short push to display the different vaues.
long push to reset and then start a new mission.
New mission Fiat Ducato 3.

Reset can be:

“manual” resetting by the user, by pressing the relevant button;
“automatic” resetting, when the “Trip distance” reaches 3999,9 km or 9999,9 km or when the “Travel time” reaches 99.59 (99 hours and 59 minutes);
after disconnecting/reconnecting the battery.
IMPORTANT The reset operation in the presence of the screens concerning the “Trip A” makes it possible to reset only the information associated with this function.

IMPORTANT The reset operation in the presence of the screens concerning the “Trip B” makes it possible to reset only the information associated with this function.

Start of journey procedure. With ignition key at MAR, press and keep button TRIP pressed for over 2 seconds to reset.

Exit Trip – to quit the Trip function: keep button MODE pressed for over 2 seconds.

Reset oil service Suzuki Grand Vitara diesel 2013

Leave a reply

How do you reset maintenance light, reset service light indicator Suzuki Grand Vitara. For reset maintenance light and that can be made manually by use button on car dash board.

Remove dash service light Suzuki Grand Vitara 1.9, diesel 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014.

Instructions

  • Ignition on (engine not running)
  • Foot on accelerator all the way down
  • At the same time pump the brake pedal 3 times

This must be done within 10 seconds of turning ignition on.

Reset the desired vehicle set speed Fiat 500

Leave a reply

Reset the desired vehicle set speed Fiat 500. From year: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014.

Electronic speed control Fiat 500.

When engaged, the Electronic Speed Control takes over accelerator operations at speeds greater than 25 mph (40 km/h). The Electronic Speed Control buttons are located on the right side of the steering wheel.

Speed Control Buttons Fiat 500.

In order to ensure proper operation, the Electronic Speed Control system has been designed to shut down if multiple Speed Control functions are operated at the same time. If this occurs, the Electronic Speed Control system can be reactivated by pushing the Electronic Speed Control ON/OFF button and resetting the desired vehicle set speed.

To activate.

Push the ON/OFF button. The Cruise Indicator light in the instrument cluster will illuminate. To turn the system off, push the ON/OFF button a second time. The Cruise Indicator light will turn off. The system should be turned off when not in use.

Leaving the Electronic Speed Control system on when not in use is dangerous. You could accidentally set the system or cause it to go faster than you want. You could lose control and have an accident. Always leave the system OFF when you are not using it.

To set a desired speed on a Fiat 500.

Turn the Electronic Speed Control ON. When the vehicle has reached the desired speed, press the SET (-) button and release. Release the accelerator and the vehicle will operate at the selected speed.

The vehicle should be traveling at a steady speed and on level ground before pressing the SET button.

To deactivate.

A soft tap on the brake pedal, pushing the CANC button, or normal brake pressure while slowing the vehicle will deactivate Electronic Speed Control without erasing the set speed memory. Pressing the ON/OFF button or turning the ignition switch OFF erases the set speed memory.

To resume speed.

To resume a previously set speed, push the RES (+) button and release. Resume can be used at any speed above 20 mph (32 km/h).

To vary the speed setting.

When the Electronic Speed Control is set, you can increase speed by pushing the RES (+) button. If the button is continually pressed, the set speed will continue to increase until the button is released, then the new set speed will be established. Pressing the RES (+) button once will result in a 1 mph (2 km/h) increase in set speed. Each subsequent tap of the button results in an increase of 1 mph (2 km/h).

To decrease speed while the Electronic Speed Control is set, push the SET (-) button. If the button is continually held in the SET (-) position, the set speed will continue to decrease until the button is released. Release the button when the desired speed is reached, and the new set speed will be established. Pressing the SET (-) button once will result in a 1 mph (2 km/h) decrease in set speed. Each subsequent tap of the button results in a decrease of 1 mph (2 km/h).

To accelerate for passing.

Press the accelerator as you would normally. When the pedal is released, the vehicle will return to the set speed.

Using electronic speed control on hills Fiat 500.

The transmission may downshift on hills to maintain the vehicle set speed.

The Electronic Speed Control system maintains speed up and down hills. A slight speed change on moderate hills is normal. On steep hills, a greater speed loss or gain may occur so it may be preferable to drive without Electronic Speed Control.

Electronic speed control can be dangerous where the system cannot maintain a constant speed. Your vehicle could go too fast for the conditions, and you could lose control and have an accident. Do not use Electronic Speed Control in heavy traffic or on roads that are winding, icy, snow-covered or slippery.