Tag Archives: oil

Reset oil service light Toyota Rav4 XA30

Leave a reply

Reset oil service light Toyota Rav4, third generation XA30. From year: 2009, 2010, 2011, 2012, 2013.

How to reset oil service light Toyota Rav4, 3 generation XA30.
To reset the oil change system, follow the procedure below:
Vehicles without smart key system.
  1. Turn the engine switch off with the trip meter A reading shown.
  2. While pressing the trip meter reset button, turn the engine switch to the “ON” position.
  3. Press and hold the button until the trip meter displays “000000”.

 

Vehicles with smart key system.
  1. Turn the “ENGINE START STOP” switch off with the trip meter A reading shown.
  2. While pressing the trip meter reset button, turn the “ENGINE START STOP” switch to IGNITION ON mode.
  3. Press and hold the button until the trip meter displays “000000”.
All information how to reset oil service light is taken from Toyota Rav 4 owners manual.
Used engine oil. Used engine oil contains potentially harmful contaminants which may cause skin disorders such as inflammation or skin cancer, so care should be taken to avoid prolonged and repeated contact. To remove used engine oil from your skin, wash thoroughly with soap and water.
Dispose of used oil and filters only in a safe and acceptable manner. Do not dispose of used oil and filters in household trash, in sewers or onto the ground. Call your Toyota dealer, service station or auto parts store for information concerning recycling or disposal.
Do not leave used engine oil within the reach of children.
 Reset-oil-service-light-Toyota-Rav4-XA30
.
Vehicles without smart key system.
  • The following gauges, meters and displays illuminate when the engine switch is in the “ON” position.
Vehicles with smart key system.
  • The following gauges, meters and displays illuminate when the “ENGINE START STOP” switch is in IGNITION ON mode.
  • Tachometer. Displays the engine speed in revolutions per minute.
  • Speedometer. Displays the vehicle speed.
  • Engine coolant temperature gauge. Displays the engine coolant temperature.
  • Fuel gauge. Displays the quantity of fuel remaining in the tank.
  • Trip information display.
  • Automatic transmission shift position indicator lights.
  • Odometer/trip meter.
  • Odometer. Displays the total distance the vehicle has been driven.
  • Trip meter. Displays the distance the vehicle has been driven since the meter was last reset. Trip meters A and B can be used to record and display different distances independently.
  • Odometer/trip meter switching and trip meter resetting button. Switches between odometer and trip meter displays. Pushing and holding the button will reset the trip meter when the trip meter is being displayed.

How reset oil light GMC Yukon

Leave a reply

How do you reset maintenance light, reset service light indicator GMC Yukon. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life GMC Yukon, oil reset instructions:

year 2000-2006

1. Turn the ignition to run (one position before starting engine).
2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
3. If the Change Oil Soon light flashes the system is resetting.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.

year 2007-2013

1. Turn the ignition to run (one position before starting engine).
2. *Display the OIL LIFE REMAINING on the DIC (i button). If the vehicle does not have DIC buttons, the vehicle must be in P (Park) to access this display by pressing the trip odometer reset stem.
3. Press and hold the SET/RESET (check mark) button on the DIC , or the trip odometer reset stem if vehicle does not have DIC buttons for more than 5 seconds. The oil life will change to 100%.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.
*Remaining oil life can also be reset by depressing the gas pedal 3 times within 5 seconds instead of using the DIC.

How reset oil light GMC Terrain

Leave a reply

How do you reset maintenance light, reset service light indicator GMC Terrain. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life GMC Terrain, oil reset instructions:

year 2010-2013

With Driver Information Centre (DIC):
1. Turn the ignition to run (one position before starting engine).
2. Press the MENU button until vehicle information menu is displayed then scroll through the menu with the down arrow until Remaining Oil Life is selected then press SET/CLR (check button) to select.
3. Use up or down arrow to select YES to reset.
4. Confirm reset by pressing SET/CLR button.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

Without Driver Information Centre (DIC):
1. Turn the ignition to run (one position before starting engine).
2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
3. If the Change Engine Oil Soon message goes off the system is reset.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.

How reset oil light GMC Sierra

Leave a reply

How do you reset maintenance light, reset service light indicator GMC Sierra. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life GMC Sierra, oil reset instructions:

year 2001-2007

1. Turn the ignition to run (one position before starting engine).
2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
3. If the Change Oil Soon light flashes the system is resetting.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.

year 2008-2013

1. Turn the ignition to run (one position before starting engine).
2. *Display the OIL LIFE REMAINING on the DIC (i button). If the vehicle does not have DIC buttons, the vehicle must be in P (Park) to access this display by pressing the trip odometer reset stem.
3. Press and hold the SET/RESET (arrow) button on the DIC, or the trip odometer reset stem if the vehicle does not have DIC buttons for more than 5 seconds. The oil life will change to 100%.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.
*Remaining oil life can also be reset by depressing the gas pedal 3 times within 5 seconds instead of using the DIC.

How reset oil light GMC Sierra

Leave a reply

How do you reset maintenance light, reset service light indicator GMC Sierra. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life GMC Sierra, oil reset instructions:

year 2001-2007

1. Turn the ignition to run (one position before starting engine).
2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
3. If the Change Oil Soon light flashes the system is resetting.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.

year 2008-2013

1. Turn the ignition to run (one position before starting engine).
2. *Display the OIL LIFE REMAINING on the DIC (i button). If the vehicle does not have DIC buttons, the vehicle must be in P (Park) to access this display by pressing the trip odometer reset stem.
3. Press and hold the SET/RESET (arrow) button on the DIC, or the trip odometer reset stem if the vehicle does not have DIC buttons for more than 5 seconds. The oil life will change to 100%.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.
*Remaining oil life can also be reset by depressing the gas pedal 3 times within 5 seconds instead of using the DIC.