Tag Archives: OIL LIFE REMAINING

Service light oil reset indicator Cadillac SRX

Leave a reply

Reset service light indicator, engine oil life Cadillac SRX, year 2004, 2005, 2006 reset instructions:

2004-2006

With Base Audio System
Turn the ignition to run (one position before starting engine).
Press the up or down arrow on the INFO button located to the right of the Driver Information Centre (DIC) display to access the DIC menu.
Once 100% ENGINE OIL LIFE menu is highlighted, press and hold the CLR button. The percentage will return to 100 and the oil life indicator will be reset.
Turn the ignition off and then start the engine to verify the indicator has been reset.
With Navigation System
Turn the ignition to run (one position before starting engine).
Turn the system on by pressing the PWR/VOL button.
Press the INFO button located to the left of the display to access the vehicle information menu.
Turn the TUNE/SEL knob located to the lower right of the display until Engine Oil Life is highlighted
Press the knob once to select it.
Once the 100% Engine Oil Life is displayed, press the multi-function button next to the Reset prompt in the upper right corner of the display. The percentage will return to 100 and the oil life indicator will be reset.
Turn the ignition off and then start the engine to verify the indicator has been reset.

2007-2009

Turn the ignition to run (one position before starting engine).
Display the OIL LIFE REMAINING on the DIC.
Press and hold the SET/RESET button on the DIC for more than 5 seconds. The oil life will change to 100%.
Turn the ignition off and then start the engine to verify the indicator has been reset.

2010

Turn the ignition to run (one position before starting engine).
Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
If the “Change Engine Oil Soon” message is not on, the system is reset. If it is on, turn the ignition off and repeat steps 1-2.
Turn the ignition off and then start the engine to verify the indicator has been reset.

Service light reset oil indicator Cadillac Escalade

Leave a reply

Reset service light indicator, engine oil life Cadillac Escalade, year 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 reset instructions:

2002-2006

Turn the ignition to run (one position before starting engine).
Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
If the CHANGE OIL SOON indicator flashes, the system is reset (if this does not happen, repeat steps).
Turn the ignition off and then start the engine to verify the indicator has been reset.

2007-2010

Turn the ignition to run (one position before starting engine).
Display the OIL LIFE REMAINING on the DIC.
Press and hold the SET/RESET button on the DIC for more than 5 seconds. The oil life will change to 100%.
Turn the ignition off and then start the engine to verify the indicator has been reset.

Service light reset oil indicator Cadillac Eldorado

Leave a reply

Reset service light indicator, engine oil life Cadillac Eldorado, year 1989-2002 reset instructions:

1989-1991
Turn the ignition to run (one position before starting engine).
Press ENG DATA until oil life index is displayed.
Press ENG DATA and RANGE simultaneously until oil life index resets to 100 (hold about 5 seconds).
Turn the ignition off and then start the engine to verify the indicator has been reset.
1992-1993

Turn the ignition to run (one position before starting engine).
Display the OIL LIFE INDEX by pressing the INFORMATION button.
Press and hold the STORE/RECALL button until the display shows 100.
Turn the ignition off and then start the engine to verify the indicator has been reset.

1994-1996

Turn the ignition to run (one position before starting engine).
Press the INFORMATION button several times until OIL LIFE INDEX message appears.
Press and hold the RESET button until the display resets to 100.
Turn the ignition off and then start the engine to verify the indicator has been reset.

1997-1998

Turn the ignition to run (one position before starting engine).
Press the TRIP button on the DIC to view various menu choices and stop on OIL LIFE REMAINING.
Press and hold the RESET button on the DIC switch for more than 5 seconds. The oil life will change to 100%.
Turn the ignition off and then start the engine to verify the indicator has been reset.

1999

Turn the ignition to run (one position before starting engine).
Press the SKIP INFO button on the DIC control panel in order to display the OIL LIFE LEFT message.
Press and hold the INFO RESET button until the display shows 100% ENGINE OIL LIFE.
Turn the ignition off and then start the engine to verify the indicator has been reset.

2000

Turn the ignition to run (one position before starting engine).
Press the TRIP button on the DIC to view various menu choices and stop on OIL LIFE REMAINING.
Press and hold the RESET button on the DIC switch for more than 5 seconds. The oil life will change to 99%.
Turn the ignition off and then start the engine to verify the indicator has been reset.

2001-2002

Turn the ignition to run (one position before starting engine).
Display the OIL LIFE LEFT message by repeatedly pressing the SKIP INFO button.
Press the INFO RESET button until the display shows 100% ENGINE OIL LIFE.
Turn the ignition off and then start the engine to verify the indicator has been reset.

Service light reset oil indicator Cadillac CTS

Leave a reply

Reset service light indicator, engine oil life Cadillac CTS, year 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 reset instructions:

2003-2006

With Base Audio System
Turn the ignition to run (one position before starting engine).
Press the up or down arrow on the INFO button located to the right of the Driver Information Centre (DIC) display to access the DIC menu.
Once 100% ENGINE OIL LIFE menu is highlighted, press and hold the CLR button. The percentage will return to 100 and the oil life indicator will be reset.
Turn the ignition to off and start engine to verify the indicator has been reset.

With Navigation System

Turn the ignition to run (one position before starting engine).
Turn the system on by pressing the PWR/VOL button.
Press the INFO button located to the left of the display to access the vehicle information menu.
Turn the TUNE/SEL knob located to the lower right of the display until Engine Oil Life is highlighted
Press the knob once to select it.
Once the 100% Engine Oil Life is displayed, press the multi-function button next to the Reset prompt in the upper right corner of the display. The percentage will return to 100 and the oil life indicator will be reset.
Turn the ignition to off and start engine to verify the indicator has been reset.
2007-2009
Turn the ignition to run (one position before starting engine).
Display the OIL LIFE REMAINING on the DIC.
Press and hold the SET/RESET button in the DIC for more than 5 seconds. The oil life will change to 100%.
Turn the ignition to off and start engine to verify the indicator has been reset.
2010
Turn the ignition to run (one position before starting engine).
Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
If the “Change Engine Oil Soon” message is not on, the system is reset. If it is on, turn the ignition off and repeat steps 1-2.
Turn the ignition off and then start the engine to verify the indicator has been reset.