Tag Archives: ignition

Oil reset service light indicator Jeep Compass

Leave a reply

How do you reset maintenance light, reset service light indicator Jeep Compass, year 2008, 2009, 2010, 2011, 2012, 2013, 2014. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Jeep Compass, oil reset instructions:

  1. Turn the ignition to run (one position before starting engine).
  2. Fully depress the accelerator pedal slowly three times within 10 seconds.
  3. Turn the ignition off and then start the engine to verify the indicator has been reset.

Reset tire pressure warning light Toyota Land Cruiser 100 series

Leave a reply

How to reset tire pressure warning light Toyota Land Cruiser 100 series.

Reset tire pressure warning light Toyota Land Cruiser 100 series. From year: 2002, 2003, 2004, 2005, 2006, 2007.

This light comes on when the ignition key is turned to the “ON” position. If the tire pressure warning system works properly and tire inflation pressure is appropriate, the light goes off after a few seconds. This light comes on or flashes in the folowing cases when the ignition key is turned to the “ON” position.

When the low tire inflation pressure is detected while driving.

If any tire has low inflation pressure, the light comes on.

The light goes off after the tire inflation pressure is adjusted to a specified level.

When initializing the system.

If initialization is completed, the light blinks three times.

When the system malfunctions.

If the system malfunctions, the light blinks. Although it is no problem to continue driving, have your vehicle checked by your Toyota dealer as soon as possible.

All information how to reset tire pressure warning light is taken from Toyota Land Cruiser 100 series owners manual.

Reset ABS warning light Toyota Land Cruiser 100 series

Leave a reply

How to reset ABS warning light Toyota Land Cruiser 100 series.

Reset ABS warning light Toyota Land Cruiser 100 series. From year: 2002, 2003, 2004, 2005, 2006, 2007.

The light comes on when the ignition key is turned to the “ON” position. If the anti−lock brake system and the brake assist system work properly, the light turns off after a few seconds. Thereafter, if either of the systems malfunctions, the light comes on again.

When the “ABS” warning light is on (and the brake system warning light is off), the anti−lock brake system, the brake assist system, the vehicle stability control system and/or active traction control system do/does not operate, but the brake system still operates conventionally. When the “ABS” warning light is on (and the brake system warning light is off), the anti−lock brake system does not operate so that the wheels could lock up during a sudden braking or braking on slippery road surfaces.

If either of the following conditions occurs, this indicates a malfunction somewhere in the components monitored by the warning light system. Contact your Toyota dealer as soon as possible to service the vehicle.

  • The light does not come on when the ignition key is turned to the “ON” position, or remains on.
  • The light comes on while you are driving.
  • A warning light turning on briefly during operation does not indicate a problem.

If the “ABS” warning light remains on together with the brake system warning light, immediately stop your vehicle at a safe place and contact your Toyota dealer.

Oil reset service light indicator Range Rover Sport

Leave a reply

How do you reset service light indicator Range Rover Sport. From year: 2007.

Reset service light indicator Range Rover Sport. How to reset maintenance light, reset oil service light. Can be made manually by use button on car dash board.

Instructions:

  1. Turn off the cars ignition.
  2. Hold down the reset button on the dash board to zero the mileage. keep it held in.
  3. Turn the cars ignition on, but do not start. Keep the button in for 5 seconds.
  4. A menu will come up, like date/mileage.
  5. Let go and then press the button again.
  6. It will toggle through some options, then get to rst.
  7. Press the button again, and your done.

Oil reset service light indicator Land Rover Freelander 2

Leave a reply

How do you reset service light indicator Land Rover Freelander 2.
Reset service light indicator Land Rover Freelander 2. How to reset maintenance light, reset oil service light. Can be made manually by use button on car dash board.

Instructions:

  1. Hold the milage reset button in.
  2. Turn the ignition on to position 2.
  3. Keep the button held in and various different words will flash up on the little screen.
  4. Dont release until it goes back to reading the milage.
  5. Once this comes up release the button and it should be ok when you next cycle the ignition.