Tag Archives: engine oil life

Oil reset service light indicator Chevrolet Malibu

Leave a reply

How do you reset oil service light Chevrolet Malibu. From years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012.

Reset oil service light Chevrolet Malibu.

The Engine Oil Life System calculates when to change the engine oil and filter based on vehicle use. Whenever the oil is changed, reset the system so it can calculate when the next oil change is required. If a situation accurs where you change the oil prior to a CHANGE OIL SOON message being turned on, reset the system.

To reset oil service light on your vehicle Chevrolet Malibu follow this steps:

  • Display OIL LIFE RESET on the dash board.
  • Press and hold the INFO button & ENTER button (in the same time) buttons for at least one second.
  • OIL LIFE RESET will display.
  • Hit ENTER button again and an ACKNOWLEDGED display message will appear for three seconds.
  • This tells you the system has been reset.
  • Turn the key to LOCK/OFF.

If the CHANGE OIL SOON message comes back on when the vehicle is started, the engine oil life system has not reset. Repeat the procedure.

Oil reset service light indicator Chevrolet Impala

Leave a reply

How do you reset oil service light Chevrolet Impala. From years: 1999 – 2012.

Reset oil service light Chevrolet Impala. From years: 1999, 2000, 2001, 2002, 2003, 2004, 2005.

The GM Oil Life System calculates when to change your engine oil and filter based on vehicle use. Anytime your oil is changed, reset the system so it can calculate when the next oil change is required. If a situation occurs where you change your oil prior to a CHNAGE ENGINE OIL message being turned on, reset the system.

After changing the engine oil, the system must be reset.

To reset the CHANGE ENGINE OIL message use one of the folloqing procedures.

Reset oil service light Chevrolet Impala, using the radio. From years: 1999, 2000, 2001, 2002, 2003, 2004, 2005.

  • Turn the ignition to ACC or ON, with the radio off.
  • Press and hold the TUNE DISP knob on the radio for at least five seconds until SETTINGS is displayed.
  • Press the SEEK PSCAN up or down arrow to scroll through the main menu.
  • Scroll until OIL LIFE appears on the display.
  • Press the 1 PREV or 2 NEXT buttons to enter the submenu. Reset will be displayed.
  • Press the TUNE DISP knob to reset. A chime will be heard to verify the new setting and DONE will be displayed for one second.
  • Once the indicator has been reset, scroll until EXIT appears on the display.
  • Press the TUNE DISP knob to exit programming. A chime will be heard to verify the exit.
  • Turn the key to OFF.
  • If the CHANGE ENGINE OIL message comes back on when you start your vehicle, the engine oil life system has not reset. Repeat the procedure.

Reset oil service light Chevrolet Impala, using the accelerator pedal. From years: 1999, 2000, 2001, 2002, 2003, 2004, 2005.

  • Turn the ignition to ON, with the engine off.
  • Fully press and release the accelerator pedal slowly three times within five seconds. If the CHANGE ENGINE OIL message flashes, the system is reset.
  • However, if it stays on, it did not reset. Repeat the procedure.
  • Turn the key to OFF.
  • If the CHANGE ENGINE OIL message comes back on when you start your vehicle, the engine oil life system has not reset. Repeat the procedure.

All information is taken from the Chevrolet Impala manual.

How to reset oil service light Chevrolet Impala. From years: 2006, 2007, 2008, 2009, 2010, 2011, 2012.

How to Reset the Engine Oil Life System Chevrolet Impala.

The Engine Oil Life System calculates when to change your engine oil and filter based on vehicle use. Anytime your oil is changed, reset the system so it can calculate when the next oil change is required. If a situation occurs where you
change your oil prior to a CHANGE ENGINE OIL SOON message being turned on, reset the system.

Always reset the engine oil life to 100% after every oil change. It will not reset itself. To reset the Engine Oil Life System for Chevrolet impala, do the following:

  • Display the OIL LIFE REMAINING on the DIC.
  • Press and hold the SET/RESET button on the DIC for more than five seconds. The oil life will change to 100%.
  • If the CHANGE ENGINE OIL SOON message comes back on when you start your vehicle, the Engine Oil Life System has not reset. Repeat the procedure.

All information is taken from the Chevrolet Impala manual.

Reset oil service light Saab 9-7X

Leave a reply

How to reset oil service light Saab 9-7X.

Reset oil service light Saab 9-7X. From year: 2005, 2006, 2007, 2008, 2009.

 

The Engine Oil Life System calculates when to change your engine oil and filter based on vehicle use. Anytime your oil is changed, reset the system so it can calculate when the next oil change is required. If a situation occurs where you change your oil prior to a change engine oil light being turned on, reset the system. To reset the Engine Oil Life System, do the following:

  1. Turn the ignition to run, one position before starting the car.
  2. Use the fuel button on the Driver Information Center (DIC) to reach the ENGINE OIL LIFE screen.
  3. Press and hold the select button on the Driver Information Center (DIC) five seconds while ENGINE OIL LIFE is displayed.
  4. OIL LIFE RESET will appear on the Driver Information Center (DIC) display for 10 seconds to let you know the system is reset.
  5. If the change engine oil light comes back on when you start your vehicle, the engine oil life system has not reset. Repeat the procedure.
  6. Turn the ignition to off position and then start the car to see if the engine oil life indicator has been reset.
  7. All information how to reset engine oil life system on a Saab 9-7x is taken from Saab owners manual.

Oil reset service light indicator Opel Movano

Leave a reply

How to reset service light indicator Opel Movano.

Reset service light indicator Opel Movano. From years: 2007, 2008, 2009, 2010, 2011, 2012.

  1. Turn the Ignition ON (position 2) but do not start the engine.
  2. Within 10 seconds of turning the key, press the accelerator pedal to the floor and hold it down.
  3. While still holding down the accelerator, press and release the brake pedal twice, then press it a 3rd time and hold it down.
  4. Release both pedals within around 10 seconds, the Oil Service warning light should turn off immediately.
  5. Turn Ignition OFF, then within 3 seconds turn it back ON (position 2).
  6. Turn Ignition back OFF to complete.

Each time the ignition is switched on, the remaining distance before the next engine oil and filter change is due may be shown in the display for approx. 5 seconds. Within 1,800 miles (3,000 km) of the next engine oil change being due, the remaining distance and control indicator will be displayed for approx. 30 seconds as a reminder.

Engine oil life monitor Opel Movano
If control indicator Reset service light indicator Opel Movano, car with a wrench indicator illuminates and control indicator Reset service light indicator Opel Movano, wrench indicator flashes continuously in the display, the engine oil has become oxidized.
If the engine oil has become diluted, control indicator Reset service light indicator Opel Movano, car with a wrench indicator will illuminate in conjunction with control indicator Reset service light indicator Opel Movano, check engine light indicator. In either case it is necessary to carry out an engine oil and oil filter change and to reset the engine oil life monitor.

Maintenance Oil Light Reset Acura ILX 2014

Leave a reply

How do you reset maintenance light, reset service light indicator Acura ILX, year 2014. For reset maintenance light and that can be made manually by use button on car dash board.

Reset service light indicator, engine oil life Acura ILX 2014, oil reset instructions:

  1. Set the power mode to ON (do not start the engine).
  2. Use the INFO (up/down) to highlight the CUSTOMIZE SETTINGS menu and select using the SEL/RESET button.
  3. Select the MAINTENANCE INFO menu using the SEL/RESET button.
  4. The oil life reset mode is displayed on the multi-information display.
  5. Select RESET with the (up/down) button, then press the SEL/RESET button. The displayed maintenance items disappear, and the engine oil life display is reset to 100%.
  6. Turn the ignition off and then start the engine to verify the indicator has been reset.